Specification

OFL1 LED
Series Performance Package Color Temperature Voltage Mounting Finish
(required)
OFL1 LED P1
P2
40K 4000K
50K 5000K
MVOLT
1
THK Knuckle with 1/2” NPS threaded pipe
YK Yoke
DDBXD Dark bronze
OFL Size 1
LED Flood Luminaire
Specifications
Ordering Information
EXAMPLE: OFL1 LED P1 40K MVOLT THK DDBXD
NOTES
1. MVOLT driver operates on any line voltage from
120-277V (50/60Hz).
2. Only available with OFL LED P1. It will only work on
the knuckle mount.
Catalog
Number
Notes
Type
Accessories
Ordered and shipped separately.
OFL1WG Wire Guard Accessory
OFL1VG Vandal Guard Accessory
DSXF1/2 TS Slipfitter attachment
2
EPA:
0.6 ft
2
(.06 m
2
)
Depth:
8.3”
(21.1 cm)
Width:
7”
(18 cm)
Height:
6.9”
(17.4 cm)
Weight:
5 lbs
(2.27 kg)
One Lithonia Way • Conyers, Georgia 30012 • Phone: [phone] • www.lithonia.com
© 2012-2016 Acuity Brands Lighting, Inc. All rights reserved.
Hit the Tab key or mouse over the page to see all interactive elements.
Introduction
The OFL Size 1 Floodlight delivers up to 4,000
lumens, with a robust design and several
mounting options making it perfect for light
commercial applications. It’s the ideal long-life
replacement for 70-150W metal halide floods,
with typical energy savings up to 62% and
expected service life of over 50,000 hours.
7 ⁄" (18.0 cm)
4 ⁄" (11.0 cm)
8 ⁄" (21.1 cm)
6 ⁄" (17.4 cm)
2 ½" (6.4 cm)
FEATURES & SPECIFICATIONS
INTENDED USE
The traditional and robust design of the OFL1 LED floodlight with energy efficient LEDs, is
suitable for replacing up to 150W Metal Halide. It is ideal for landscape, signage, and accent
lighting in heavy commercial and residential applications.
CONSTRUCTION
Die-cast aluminum housing has integral heat sink fins to optimize thermal management
through conductive and convective cooling. The LED driver is mounted in direct contact
with the casting to promote low operating temperature and long life. Housing is completely
sealed against moisture and environmental contaminants (IP65). Low EPA (0.6 ft
2
) for
optimized wind loading.
FINISH
Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat
finish that provides superior resistance to corrosion and weathering.
ELECTRICAL
Light engine(s) consist of chip-on-board (COB) LEDs directly coupled to the housing to
maximize heat dissipation and promote long life (50,000 hrs).
INSTALLATION
Integral adjustable knuckle with 1/2-14NPS threaded pipe, yoke, or slipfitter attachment,
facilitates quick and easy installation to a variety of mounting accessories.
LISTINGS
UL certified to U.S. and Canadian standards. Luminaire is IP65 rated. Rated for -40°C
minimum ambient.
DesignLights Consortium
®
(DLC) qualified product. Not all versions of this product may be
DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to
confirm which versions are qualified.
WARRANTY
5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.