Specification

OLWX1 LED
Series Performance Package Color Temperature Voltage Controls Finish
OLWX1 LED 13W 13 watts
20W 20 watts
40W 40 watts
40K 4000 K
1
50K 5000 K
(blank) MVOLT
2
120 120V
3
347 347V
(blank) None
PE 120V button photocell
1,3
(blank) Dark bronze
OLWX1 LED
LED Wall Luminaire
Ordering Information
EXAMPLE: OLWX1 LED 20W 50K
NOTES
1 Not available with 347V option.
2 MVOLT driver operates on any line voltage from 120-277V (50/60Hz).
3 Specify 120V when ordering with photocell (PE option).
Catalog
Number
Notes
Type
One Lithonia Way • Conyers, Georgia 30012 • Phone: [phone] • Fax: [phone] • www.lithonia.com
© 2013-2015 Acuity Brands Lighting, Inc. All rights reserved.
Hit the Tab key or mouse over the page to see all interactive elements.
Introduction
As versatile as it is efficient, the OLWX1 is designed
to replace up to 250W metal halide while saving
over 87% in energy costs. It combines multiple
mounting options with the latest generation of
LEDs for a wall pack luminaire that converts to a
whole lot more. Whether you are mounting it to a
recessed junction box, conduit/through wiring, as
an up light, as a down light, or as a flood light – the
OLWX1 has you covered.
Width:
7-1/2”
(19 cm)
Height:
8”
(20.3 cm)
Depth:
3”
(7.62 cm)
Weight:
5 lbs
(2.27kg)
Specifications
FEATURES & SPECIFICATIONS
INTENDED USE
The versatility of the OLWX1 LED combines a sleek, low-profile wall pack design and high-output
LEDs to provide an energy efficient, low maintenance LED wall pack suitable for replacing up to 250W
metal halide fixtures. Available flood light mounting accessories convert the OLWX1 LED into a highly
efficient flood light.
OLWX1 LED is ideal for outdoor applications such as building perimeters, loading areas, driveways
and sign and building flood lighting.
CONSTRUCTION
Rugged cast-aluminum housing with textured dark bronze polyester powder paint for lasting
durability. Integral heat sinks optimize thermal management through conductive and convective
cooling. LEDs are protected behind a glass lens. Housing is sealed against moisture and
environmental contaminants (IP65).
OPTICS
High-performance LEDs behind clear glass for maximum light output. Light engines are available
in 4000K and 5000K CCTs. See Lighting Facts label and photometry reports for specific fixture
performance.
ELECTRICAL
Light engine consists of 1 high-efficiency Chip On Board (COB) LED with integrated circuit board
mounted directly to the housing to maximize heat dissipation and promote long life (L73/100,000
hours at 25°C). Electronic drivers have a power factor >90% and THD <20% and a minimum 2.5kV
surge rating. Flood light mounting accessories include an additional 6kV surge protection device.
INSTALLATION
Easily mounts to recessed junction boxes with the included wall mount bracket, or for surface
mounting and conduit entry - with the included junction box with five 1/2” threaded conduit
entry hubs. Flood light mounting accessories (sold separately) include knuckle, integral
slipfitter and yoke mounting options. Each flood mount accessory comes with a top visor and
vandal guard. Luminaire may be wall or ground mounted in downward or upward orientation.
LISTINGS
UL Listed to U.S. and Canadian safety standards for wet locations. Rated for -40° C minimum
ambient. Tested in accordance with IESNA LM-79 and LM-80 standards. DesignLights
Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified.
Please check the DLC Qualified Products List at www.designlights.org to confirm which
versions are qualified.
WARRANTY
Five-year limited warranty. Full warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25°C.
Specifications subject to change without notice.
8
7-1/2
4-3/8
4-5/8
3
Accessories
Ordered and shipped separately.
OLWX1TS Slipfitter – size 1
OLWX1YK Yoke – size 1
OLWX1THK Knuckle – size 1
3
2.97
4.41
4.63
Flush or backbox mount