Installation Instructions

www.acuitycontrols.com
WSX D & SPODRMD – WIRING TO GROUND (NO NEUTRAL)
WSX EZ D WIRING TO GROUND (NO NEUTRAL)
WSX D & SPODMRD – WIRING TO NEUTRAL
WIRE KEY
Dimming Wall Switch Wiring Diagrams
Wall Switch
Wiring Diagrams
DIMMING
DIMMING
DIMMING
DIMMING
(+)
(—)
(+)
(—)
(+)
(—)
(+)
(—)
WIRING TO GROUND (NO NEUTRAL) WIRING TO NEUTRAL
WIRING TO GROUND (NO NEUTRAL) WIRING TO NEUTRAL
WSX D 2
SPODMRD
DIMMING
DIMMING
DIMMING
DIMMING
(+)
(—)
(+)
(—)
(+)
(—)
(+)
(—)
WIRING TO GROUND (NO NEUTRAL) WIRING TO NEUTRAL
WIRING TO GROUND (NO NEUTRAL) WIRING TO NEUTRAL
WSX D 2
SPODMRD
NOTE:
1. Relay remains closed
2. Load BLK wire driver hot
120/277 VAC WIRING
- Line/Load Miswire Protected
347 VAC WIRING (-347 Option)
wires replace wires.
0-10 VDC
- Low Voltage Dim Output (0-10 VDC)
- Low Voltage Common
Per NEC requirements, the 0-10V violet and gray
wires must be installed as Class One.
The 0-10V control wires must not exceed 250 ft
(76 m) in length and must be sized at no less than
20AWG.
(+)
(— )