Specification Sheet

FLUORESCENT SBN
SB 2
Series Lamp type Voltage Options
SB 2 2 l
amps, 8-3/8" wide
For tandem double-length unit,
add prex T. Example: TSB
17 17W T8 (24")
32
32W T8 (48")
14T5 14W T5 (22-1/2")
28T5 28W T5 (46-1/2")
54T5HO 54W T5 HO (46-1/2")
120
277
347
1
MVOLT
2
Shipped installed in xture
GEB10IS Electronic ballast, <10% THD, instant start
GEB10PS Electronic ballast, <10% THD, program start
GEB95 .95 ballast factor T5
3
GEB95S .95 ballast factor T5 step dimming
3
EL Emergency battery pack (nominal 300 lumens, see Life Safety Section)
4
EL14 Emergency battery pack (nominal 1400 lumens, see Life Safety Section)
4
GLR Internal fast-blow fuse
5
GMF Internal slow-blow fuse
5
RE 120V residential electronic ballast
6
CSA Listed and labeled to comply with Canadian Standards
NOM NOM certied
SSR Specular silver interior nish (95% reective)
ORDERING INFORMATION
For shortest lead times, congure products using standard options (shown in bold.)
Example: SB 2 32 MVOLT GEB10IS
Catalog
Number
Notes
Type
All dimensions are inches (centimeters)
unless specied otherwise.
FEATURES & SPECIFICATIONS
INTENDED USE  For applications that require the clean appearance of a at-bottom diuser. Provides
high light levels for storage rooms, oces or retail applications. Certain airborne contaminants
can diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table for
suitable uses.
CONSTRUCTION  Linear side prisms control brightness, pyramidal bottom prisms minimize lamp im-
age. Continuous side anges on xture body provide light trap and continuous diuser support to prevent
accidental opening and simplify maintenance. Full depth, white enamel end plates.
Die-formed from code gauge cold-rolled steel. Channel cover snaps into place without the use of tools. Full
end cap factory installed to reduce job site labor. Diuser is extruded clear acrylic.
Finish: Five-stage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance.
Finished with high-gloss, baked white enamel.
ELECTRICAL  Thermally protected, resetting, Class P, HPF, UL listed, CSA Certied ballast is standard.
Energy saving and electronic ballasts are sound rated A.
Luminaire is suitable for damp locations. AWM, TFN or THHN wire used throughout, rated for required
temperatures.
INSTALLATION  For surface or stem mounting, individual or row installation.
LISTINGS  UL listed to U.S. and Canadian Safety Standards. Optional: Canada CSA or Mexico NOM
WARRANTY  1-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Specications subject to change without notice.
Square-Basket Wraparound
SB
T8/T5
NARROW BODY
2', 4' or 8' lengths
2 lamps
Notes
1. Not available in GEB10PS.
2. Electronic ballast 120 through 277V only.
3. Only available with 14T5 or 28T5.
4. Not available with T5 2' conguration.
5. Must specify voltage.
6. Must specify voltage, 120V. Energy Star® qualied.
8-5/8
(21.9)
2-5/8
(6.7)
2-5/8
(6.7)
1-1/2
(3.8)
3-3/4
(9.5)
8-5/8
(21.9)
3-9/16
(9.0)
1-3/8
(3.5)
Accessories: Order as separate catalog number.
SQ_ S
wivel-stem hanger (specify length in 2" increments)
1B Ceiling spacer (1-1/2" to 2-1/2" from ceiling)
T8
T5
Specications
T8 Length: 24 (61.0)
48 (122.0)
96 (243.9)
T5 Length: 22-1/2 (57.2)
46-1/2 (118.1)
92-1/2 (235.0)
Width: 8-3/8 (21.2)
Depth: 2-5/8 (6.7)