Cut Sheet
PSG9
LITHONIA FLLITHONIA FL
LITHONIA FLLITHONIA FL
LITHONIA FL
UORESCENTUORESCENT
UORESCENTUORESCENT
UORESCENT
117
Miscellaneous Options
www.lithonia.com
FLFL
FLFL
FL
UORESCENT OPTIONSUORESCENT OPTIONS
UORESCENT OPTIONSUORESCENT OPTIONS
UORESCENT OPTIONS
Ceiling Spacer (Order separately)
1B Hanger spaces fixtures 1½" to 2½" from ceiling.
For unit mounting, order two per fixture; for
row mounting, order one per fixture plus one
per row. Standard pack: 2, 20, 100.
Chain Hangers (Order separately)
HC Wire hook and 36" chain set, option or accesso-
ry. One pair per fixture furnished. Not compati-
ble with fixtures over 5" wide.
Example: UN 2 32 120 HC or HC36 (accessory)
Double-Stem Hangers (Order separately)
DSH24 Complete assembly with double canopy and two
24" stems on 10" centers. For most 4' fixtures.
Other stem lengths available.
Swivel-Stem Hangers (Order separately)
SQ_ Complete assembly with stem up to 48"
(consult factory for longer lengths). Specify
stem length in 2" increments and adjust as
needed.
5
/
8
” O.D. stem. Swivels 30° from
vertical in any direction.
Example: SQ24
HDSQ_ Complete heavy-duty assembly. Specify length
in 2" increments and adjust as needed, swivels
45° from vertical. Example: HDSQ36
ST_ Pipe stem only. Specify length up to 60".
Example: ST18
Q Canopy, offset bar and parts only.
ST_TBE Pipe stem only, threaded both ends. Coupler in-
cluded. Specify length from 6" to 60". Example:
ST48TBE.
Tong Hangers (Order separately)
Order by channel width. For unit or row mounting, order two per
fixture. All tong (slide clamp) hangers are suitable for use with 3/
8” or smaller mounting rods. Rods smaller than 3/8” diameter re-
quire use of appropriate washers (supplied by others). Standard
pack: 2, 100.
THUN Hanger for 5" channel
TH2UN Hanger for 9" channel
THC Hanger for 4
3
/
16
” channel
THK Hanger for 4
9
/
16
” channel
THSR Hanger for 5" channel (uses carriage bolt
mounting rod)
Hooker® Hangers (Order separately)
Patented, no-tools system for easy mounting to grid
tee ceilings. For use with inverted tee exposed grid
ceilings, nominal 1" wide.
• Hooks anywhere on grid – main tee, cross tee or
intersection.
• Die-formed from heavy-gauge steel.
• Fixture can be mounted parallel or perpendicu-
lar to grid, flush to ceiling or 1½" below tee.
Two required per fixture. Standard pack: 10, 48.
Number Type of mounting For use with
HRC Flush to ceiling CB, L, C and ALC fixtures with
HRC1 Spaced 1½" from ceiling
4
3
/
16
” wide and 2
1
/
16
” deep channels.
HRUN Flush to ceiling PV, AF fixtures
HRUN1 Spaced 1½" from ceiling
with 5" channels
HRUNS1 Spaced 1½" from ceiling UN, S, EJS
HOOKER®
Hanger, Pat. No. 3,589,660
Wireguards (Order separately)
14-gauge baked white enamel, 4' long. Order two for 8' fixtures.
For use with: Catalog number:
UN (with UNASR48 reflector) WGUNASR
2UN (9" wide) WG2UN
UNS/UND WGCUN
C (with CASR48 reflector) WGCASR
C (with CSMR48 reflector) WGCSMR
S (with SASR48 reflector) WGSASR
S (with SSMR48 reflector) WGSSMR
S (without reflector) WGS
AF, PV WGAFPV
EJ (12" wide) WGJ
2EJ (16" wide) WG2EJ
L WGL
For optional 11-gauge construction, add suffix 11 to catalog number.
Example: WGSASR11
Offset bar
30°
Swivel
Stem
Canopy
Spin nut
Express delivery products.
See page11 for details about LightQuick XD.
Description
WGL
WGCUN
HC36