Specification

Indoor General Purpose
Cabinet Light
Linkable Stick - LED
24V LED
FEATURES & SPECIFICATIONS
INTENDED USE
Provides accent illumination in residential and light commercial applications. Ideal for use as toe-kick
lighting for counter cabinets, providing a warm inviting atmosphere in the kitchen. Also use in bookcases
and display cabinets.
ATTRIBUTES
Long-lasting LEDs - 40,000 hours average bulb life. 1/2” low-prole light sticks, available in 6”, 12” and
18” lengths. Quick-connect brackets or double-sided tape allows for quick and easy installation. Light
sticks can be linked end-to-end for continuous illumination. 3” linking cord accessory links xtures around
corners, or for wider spacing use 24” linking cord accessory (order separately - see Accessories).
Includes 0.1-watt 3,500K LED bulbs, for a bright illumination and long life. Total wattage 0.45W 6”stick,
0.9W 12’stick and 1.35W for 18” stick.
Requires 24V step-down transformer kit (sold separately - see accessories below). Links up to 10’ of xtures
on one transformer. Kit includes 6’ power cord and 24” transformer linking cord. Can be direct-wired with
splice box and 24” connector cord, (order separately - see Accessories below).
26” cord with in-line power switch available (order separately - see Accessories below).
All mounting hardware included.
LISTING
CUL listed to US and Canadian safety standards and suitable for damp locations.
WARRANTY
2-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Specications subject to change without notice.
Notes:
1 Includes 0.45W 24-volt LED ballasts, 0.9W 24-volt LED ballasts or 1.35W
24-volt LED ballasts.
2 Links up to 10’ of xtures per transformer. Includes 6’ power cord and 24”
transformer linking cord.
DECORATIVE INDOOR STGC
Catalog
Number
Notes
Type
Series
1
STK6 6” - 0.45W 24-volt (6) integral LED bulbs included
STK12 12” - 0.9W 24-volt (12) integral LED bulbs included
STK18 18” - 1.35W 24-volt (18) integral LED bulbs included
STKTRANS24 24-volt transformer required
2
ORDERING INFORMATION
For shortest lead times, congure products using bolded options.
Example: STK6
Accessories /Replacement parts
INLS26 In-line power switch with 26” cord
UCD JB Splice box (for easy direct wiring - 24” cord connector required)
UC ERC24
24” cord connector (required when using splice box)
UCH WWC
18” cord cover (conceal cords)
STKCC24
24” LED connector cord (for longer spacing between xures)
STKCC3
3” LED connector cord (for linking xtures around corners)
(A)
(B)
(C)
Nominal
size
Model
number
Number of
lamps
(A) Width
inches (cm)
(B) Length
inches (cm)
(C) Extension*
inches (cm)
6” STK6 0.45W 24V LED 1/2” (1.3) 6-1/4” (10.5) 3/8” (1.0)
12” STK12 0.9W 24V LED 1/2” (1.3) 12-1/4” (31.1) 3/8” (1.0)
18” STK18 1.35W 24V LED 1/2” (1.3) 18-1/4” (46.4) 3/8” (1.0)
*Extension from ceiling
All dimensions are shown in inches (centimeters) unless otherwise noted.
DIMENSIONS