Specification Sheet

TDD LED
Series Light Engine Color Temperature Voltage Controls Finish
TDD
LED 1 1412 lumens 40K 4000K
1
120 120 volts PE Photocell (blank) Grey
TDD LED
LED Area Luminaire
Ordering Information
EXAMPLE: TDD LED 1 40K 120 PE
NOTES
1 Correlated color temperature (CCT) shown is nominal per
ANSI C78, 377-2008.
Catalog
Number
Notes
Type
One Lithonia Way • Conyers, Georgia 30012 • Phone: [phone] • Fax: [phone] • www.lithonia.com
© 2013 Acuity Brands Lighting, Inc. All rights reserved.
Hit the Tab key or mouse over the page to see all interactive elements.
Introduction
The popular TDD luminaire is now available with
long-lasting, energy-efcient LED technology.
Featuring a classic dayform, the TDD LED offers
a fresh update to a traditional appearance and is
powered by advanced LEDs.
The TDD LED luminaire is powerful yet energy
efcient, capable of replacing up to a 100W metal
halide luminaire while saving up to 84% in energy
costs. Offering an expected service life of more
than 10 years, the TDD LED eliminates frequent
lamp and ballast replacements associated with
traditional technologies.
Width:
7”
(17.7 cm)
Height:
5-1/4”
(13.3 cm)
Depth:
9-3/8”
(23.9 cm)
Weight:
1.92 lbs
(.87kg)
Specifications
H
W D
Accessories
Ordered and shipped separately.
OMA Mounting Arm
Width:
2-3/4”
(7 cm)
Height:
2-1/4”
(5.6 cm)
Opening:
1-3/4”
(4.5 cm)
Backplate
W
H
O
FEATURES & SPECIFICATIONS
INTENDED USE
The energy savings, long life and easy-to-install design of the TDD LED make it the smart choice
for building-and post-mounted doorway, pathway and yard illumination for nearly any facility.
CONSTRUCTION
Die-cast aluminum housing has an impact-resistant, polycarbonate lens which protects the LEDs.
The xture is sealed against moisture and environmental contaminants.
FINISH
Exterior parts are protected by a thermoset powder-coat nish that provides superior resistance
to corrosion and weathering. A thightly controlled multi-stage process ensures a minimum 2 mils
thickness for a nish that can withstand extreme climate changes without cracking or peeling
OPTICS
Protective polycarbonate lens covers the light engine’s LEDs. Light engines are available in 4000K
(73 min. CRI) congurations.
Electrical
Light engine consists of two multi-chip, high-output LEDs mounted on an integral aluminum
heat sink to maximize heat dissipation and promote long life (L98/50,000 hours at 40°C).
2.5kV surge protection. Electronic driver operates at 120V. Integrated photocell is standard.
No user serviceable parts.
Installation
Easily mounts to a wooden post or pole using 2” lag screws, included. Compatible with
OMA-1-5/8” mounting arm, sold seperately.
LISTINGS
UL Listed to U.S. and Canadian safety standards for wet locations.
WARRANTY
Five-year limited warranty. Full warranty terms located at www.acuitybrands.com/
CustomerResources/Terms_and_conditions.aspx.
Note: Specications are subject to change without notice. Actual performance may differ as
a result of end-user environment and application