Technical Specifications
TDD2 LED
Series Light Engine Color Temperature Voltage Controls Finish Option
TDD2 LED P1 4,700 lumens 50K 5000K 120 120 volts PER Twist-lock photocell
included
DNA Grey M4
TDD2 LED
LED Area Luminaire
Ordering Information
EXAMPLE: TDD2 LED P1 50K 120 PER DNA M4
Catalog
Number
Notes
Type
Hit the Tab key or mouse over the page to see all interactive elements.
Introduction
The popular TDD2 LED luminaire is now available
with long-lasting, energy-efficient LED technology.
Featuring a classic dayform, the TDD2 LED offers
a fresh update to a traditional appearance and is
powered by advanced LEDs.
The TDD2 LED luminaire is powerful yet energy
efficient, capable of replacing a 175W mercury
vapor luminaire while saving 82% in energy costs.
The TDD2 LED eliminates frequent lamp and
ballast replacements associated with traditional
technologies. Can be wall or post mounted with
integral bracket or onto 1-5/8” mast arm.
Width:
9-1/2”
(24.0 cm)
Height:
9-1/8”
(23.0 cm)
Depth:
11-3/8”
(29.0 cm)
Weight:
4.8 lbs.
(2.17 kg)
Specifications
H
W D
Accessories
Ordered and shipped separately.
OMA Mounting Arm
Width:
2-3/4”
(7 cm)
Height:
2-1/4”
(5.6 cm)
Opening:
1-3/4”
(4.5 cm)
Backplate
W
H
O
FEATURES & SPECIFICATIONS
INTENDED USE
The energy savings, long life and easy-to-install design of the TDD2 LED make it the smart choice
for building-and post-mounted doorway, pathway and yard illumination for nearly any facility.
CONSTRUCTION
Die-cast aluminum housing has an impact-resistant, polycarbonate lens which protects the LEDs.
The fixture is sealed against moisture and environmental contaminants.
FINISH
Exterior parts are protected by a thermoset powder-coat finish that provides superior resistance
to corrosion and weathering. A tightly controlled multi-stage process ensures a minimum 2 mils
thickness for a finish that can withstand extreme climate changes without cracking or peeling.
OPTICS
Protective polycarbonate lens covers LEDs. Removable lower diffuser provides some up-light for
a traditional appearance. DesignLights Consortium® (DLC) qualified with or without diffuser. Light
engine is 5000K (80 min. CRI).
ELECTRICAL
Light engine consists of high-powered LEDs mounted to the outer edge of the integral
aluminum heat sink to maximize heat dissipation and promote long LED life (L87/100,000
hours at 25° C). 6kV surge protection. Electronic driver operates at 120V. Twist-lock
replaceable photocell is standard.
INSTALLATION
Easily mounts to a wooden post or pole using 2” lag screws, included. Compatible with
OMA-1-5/8” mounting arm, sold separately.
LISTINGS
UL Listed to U.S. and Canadian safety standards for wet locations.
WARRANTY
Five-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
OMA Mounting Arm
(Optional)
TDD2 LED
Rev. 08/19/19
One Lithonia Way • Conyers, Georgia 30012 • Phone: 800-705-SERV (7378) • www.lithonia.com
© 2015-2019 Acuity Brands Lighting, Inc. All rights reserved.
COMMERCIAL OUTDOOR