Specification

OUTDOOR TFA-M-S
Catalog
Number
Notes
Type
*Weight as congured in example below.
All dimensions are inches (centimeters) unless otherwise specied.
TFA
Series Wattage Distribution Voltage Ballast Mounting
TFA
Metal
halide
200M
1
250M
2
320M
1
350M
1, 3
400M
2
750M
1, 4
775M
1, 5
875M
1, 5
1000M
6
High pressure
sodium
7
250S
400S
750S
1000S
6
Horizontal
TA (7 X 7)
RN (6 X 3)
Vertical
RE (4 X 4)
8
RC (5 X 5)
8, 9
RM (6 X 5)
RB (6 X 6)
TA2 (7 X 6)
120
208
10
240
10
277
347
480
10
TB
11
23050HZ
12
(blank) Magnetic ballast
CWI Constant wattage isolated
SCWA Super SCWA pulse start
ballast
Note: For shipments to U.S. territories,
SCWA must be specied to comply
with EISA.
Shipped installed
(blank) Yoke
IS Integral sliptter
(2-3/8" to 2-7/8"
OD tenon)
Shipped separately
13, 14
FTS Tenon sliptter (2-3/8" to
2-7/8" OD tenon)
15
FRWB Radius wall bracket
16
FSAB Steel angle bracket
15
FSPB Steel square pole bracket
16
FWPB Wood pole bracket
15
Options Finish
21
Lamp (required)
Shipped installed in xture
SF Single fuse (120, 277, 347V)
17
DF Double fuse (208, 240, 480V)
17
CF Charcoal lter
C62 2' 16-3 SEO cord prewired
C42 2' 14-3 SEO cord prewired
C22 2' 12-3 SEO cord prewired
EC Emergency circuit
18
QRS Quartz restrike system
18
QRSTD Quartz time delay
12, 18
PER NEMA twist-lock photo-
electric receptacle
19
TP Tamper proof latches
CSA CSA certied
NOM NOM certied
12
INTL Available for MH probe
start shipping outside
the U.S.
REGCI California Title 20 eec-
tive 1/1/02010
Shipped separately
13
FV Full visor
14, 20
UV Upper visor
14, 20
VG Vandal guard
14, 20
WG Wire guard
20
PE1 NEMA twist-lock photocontrol (120,
208, 240V)
PE3 NEMA twist-lock photocontrol (347V)
PE4 NEMA twist-lock photocontrol (480V)
PE7 NEMA twist-lock photocontrol (277V)
SC Shorting cap for PER option
(blank) Dark bronze
DWH White
DBL Black
DMB Medium bronze
DNA Natural
aluminum
CRT Non-stick
protective
coating
22
Super Durable Finishes
DDBXD Dark bronze
DBLXD Black
DNAXD Natural
aluminum
DWHXD White
DDBTXD Textured dark
bronze
DBLBXD Textured black
DNATXD Textured natural
aluminum
DWHGXD Textured white
LPI Lamp
included
L/LP Less
lamp
ORDERING INFORMATION
Example: TFA 1000M TA TB LPI
For shortest lead times, congure product using standard options (shown in bold).
FEATURES & SPECIFICATIONS
INTENDED USE — Use for industrial yards, parking lots, construction sites, and signage.
CONSTRUCTION — NEMA heavy-duty construction. Contoured die-cast aluminum housing and
front bezel. Bezel is hinged and latched for fast, easy "no-tool" internal access to optical and electrical
compartments.
Finish: Standard nish is dark bronze (DDB) corrosion resistant polyester powder nish with other
architectural colors available.
OPTICS — Precision die-formed specular anodized aluminum reector provides high eciencies with
vertical or horizontal lamp orientation. Premium one-piece silicone gasket seals optical chamber to inhibit
entrance of outside contaminants. Lamp support standard with horizontally lamped 1000W units.
Lens: heavy-duty, thermal shock-resistant clear tempered glass with no metal-to-glass contact.
ELECTRICAL — Ballast: high power factor constant-wattage autotransformer. Super CWA pulse start
ballast required for 200M, 320M, 350M, 750M, 775M & 875M (SCWA option). Super CWA Pulse Start ballasts,
88% ecient and EISA legislation compliant, are required for 200-400W (must order SCWA option) for US
shipments only. CSA, NOM or INTL required for probe start shipments outside of the US. Ballast is 100%
factory-tested. Electrical components are mounted to rear housing for maximum heat dissipation, accessible
through front bezel.
Socket: Porcelain, vertically or horizontally-oriented, mogul-base socket with copper alloy, nickel -plated
screw shell and center contact. UL listed 1500W, 600V.
INSTALLATION — Front bezel "no-tool" latches are easily operable while wearing heavy work gloves.
Corrosion-resistant, heavy-duty painted steel mounting yoke included.
LISTINGS — UL Listed (standard). CSA certied (See Options). NOM certied (See Options). UL listed for
25°C ambient and wet locations. IP65 rated.
WARRANTY — 1-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Specications subject to change without notice.
Specications
Overall height: 24-3/8 (61.9)
Overall width: 24 (61.0)
Depth: 10 (25.4)
*Weight: 65lbs(29.5 kg)
EPA: 2.6ft
2
Floodlighting
TFA
METAL HALIDE: 200W - 1000W
HIGH PRESSURE SODIUM: 250W - 1000W
Notes
1 Must be ordered with SCWA.
2 These wattages require the REGC1 option to be chosen for shipments into
California for Title 20 compliance. 250M REGC1 in not available in 347 or 480V.
3 These wattages do not comply with California Title 20 regulations.
4 N/A with vertical distributions.
5 Must specify voltage (120, 208, 240, 277, 347 or 480). Not available with TB.
208, 240, and 480v not available in Canada.
6 1000W vertical and 1000M SCWA horizontal distributions require a reduced
jacketed lamps.
W
D
H
7 N/A with SCWA. 750S — must specify voltage (120, 208, 240, 277, 347
or 480).
8 N/A with 1000S or 750S.
9 N/A with 750M, 775M, 875M or 1000M.
10 Must specify CWI for use in Canada.
11 Optional multi-tap ballast (120, 208, 240, 277V). In Canada 120, 277, 347V;
ships as 120/347.
12 Consult factory for available wattages.
13 May be ordered as an accessory.
14 Must specify nish when ordered as an accessory.
15 Yoke-mount only.
16 Requires IS or FTS.
17 Must specify voltage. N/A with TB.
18 Max allowable wattage lamp included.
19 Photocell not included.
20 Prex with TFA when ordered as an accessory. Field modication required
unless ordered with xture.
21 See www.lithonia.com/archcolors for additional color options.
22 Black nish only.