Specification

TFA-M-S
OUTDOOR: One Lithonia Way Conyers, GA 30012 Phone: [phone] Fax: [phone] www.lithonia.com ©1990-2013 Acuity Brands Lighting, Inc. All rights reserved. Rev. 02/21/13
TFA Floodlight
TFA 1000M TA2, 1000W metal halide lamp, 110000 rated lumens,test no. LTL11697
TFA 1000M TA, 1000W metal halide lamp, 107800 rated lumens,test no. 97121701
ELECTRICAL CHARACTERISTICS
Line current Primary
Primary (amps) dropout Input Power Regulation
Wattage/ballast voltage start/operating voltage watts factor (%) Line V = Lamp lumens
120 5.90/9.20 70
208 3.40/5.30 120
1000 CWA 240 2.90/4.60 140 1070 90+ ±10% = ±10%
Peak-lead 277 2.50/4.00 160
480 1.50/2.30 280
Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause dierences between laboratory data and
actual eld measurements. Dimensions and specications on this sheet are based on the most current available data and are subject to change without notice.
Notes
1 Photometric data for other distributions can be accessed from the Lithonia Lighting website. (www.Lithonia.com)
2 For electrical characteristics, consult outdoor technical data specications on www.lithonia.com.
Mounting Height Correction Factor
(Multiply the fc level by the correction factor)
25 ft. = 1.44
35 ft. = .73
40 ft. = .56
Existing Mounting Height
New Mounting Height
2
= Correction Factor
Cartesian Plot
Angle (Deg)
-90-60 -300 30 60 90
0
8400
16800
25200
33600
42000
Max - 3
90909090909090
Candlepower
Distance (MH)
Classification: Unclassified (Type I, Very Short), Cutoff
Mounting Height = 20 ft.
-3
-2
-1
0
1
2
3
4
5
-4 -3 -2 -1 01234
Distance (MH)
ISOILLUMINANCE PLOT (FC)
5
2.5
1.5
1
0.5
0.25
Cartesian Plot
Angle (Deg)
-90-60 -300 30 60 90
0
5600
11200
16800
22400
28000
Max - 0
90909090909090
Candlepower
Distance (MH)
Classification: Unclassified (Type II, Very Short), Cutoff
Mounting Height = 20 ft.
-4
-3
-2
-1
0
1
2
3
4
-4 -3 -2 -1 01234
Distance (MH)
ISOILLUMINANCE PLOT (FC)
5
2.5
1.5
1
0.5
0.25