Specification

TFX2 LED
Rev. 12/03/19
Page 1 of 2
One Lithonia Way • Conyers, Georgia 30012 • Phone: [phone]-SERV (7378) • www.acuitybrands.com
© 2019 Acuity Brands Lighting, Inc. All rights reserved.
COMMERCIAL OUTDOOR
Catalog
Number
Notes
Type
Hit the Tab key or mouse over the page to see all interactive elements.
Introduction
The TFX2 LED flood luminaire is a cost-effective,
energy-efficient, long-life solution for replacing
metal halide or HPS floodlights. Delivering 13,200
lumens, the TFX2 can replace up to 250W metal
halide while saving 68% in energy costs. Reliable
IP66 construction and excellent LED lumen
maintenance will ensure a long service life; avoiding
the multiple lamp changes of the metal halide
luminaires they replace.
The TFX2 is available with integral slip fitter and
yoke mounting options. The slip fitter can be used
for installation on 2 3/8” outer diameter tenons.
FEATURES & SPECIFICATIONS
INTENDED USE
The TFX2 LED floodlight is designed to provide a cost effective, energy-efficient solution for the
one-for-one replacement of existing metal halide or high pressure sodium lighting. The TFX2 is
ideal for replacing up to 250W HID luminaires in parking lots, signage, yards, and other floodlighting
applications. TFX luminaires deliver a uniform, wide flood distribution.
CONSTRUCTION
The TFX2 LED floodlight features a die-cast aluminum main body with optimal thermal
management that both enhances LED efficacy and extends component life. The light engines and
housing are IP66 rated, and sealed against moisture or environmental contaminants.
ELECTRICAL
Light engine(s) configurations consist of high-efficacy LEDs and LED lumen maintenance is
L90/100,00 hours. 4000K and 5000K color temperature (CCT) options with minimum CRI of 70.
Electronic drivers ensure system power factor >90% and THD <20%. All luminaires have 6kV surge
protection.
INSTALLATION
The integral slip fitter option (IS) mates with standard 2 3/8” tenons for pole-top mounting. The
yoke mount (YK) option allows mounting to solid surfaces and has a 30” SO cord. TFX luminaires
are suitable for aiming in any orientation. TFX is rated for installation on ground. Can be tilted
from 0° horizontal facing downwards, up to 180° horizontal facing upwards.
LISTINGS
UL Certified to meet U.S. and Canadian standards. Suitable for wet locations. IP66 Rated.
DesignLights Consortium® (DLC) Premium qualified product. Please check the DLC Qualified
Products List at www.designlights.org/QPL to confirm.
WARRANTY
5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
TFX2 LED
Floodlights
TFX2 with Slipfitter Mount
Color
Temp
Lumen
Output
Input
Power
Efficacy
(Lumens per Watt)
Finish Voltage Mounting Catalog Number CI Code UPC Code
4000K
13,200 94W 140
Dark
Bronze
MVOLT
(120V-277V)
Slipfitter TFX2 LED 40K MVOLT IS DDBXD *2552MC 193047670241
Yoke TFX2 LED 40K MVOLT YK DDBXD *2552ME 193047670234
5000K
Slipfitter TFX2 LED 50K MVOLT IS DDBXD *2581FG 193048041545
Yoke TFX2 LED 50K MVOLT YK DDBXD *2581FK 193048041552
TFX2 with Yoke Mount
Ordering Information