Installation Guide
Never connect components under load.
Do not mount or support these fi xtures in a manner that can cut the outer jacket or damage wire insula on.
Unless individual product specifi ca ons deem otherwise: Never connect an LED product directly to a dimmer packs,
occupancy sensors, ming devices, or other related control devices. LED fi xtures must be powered directly off a switched
circuit.
Unless individual product specifi ca ons deem otherwise: Do not restrict fi xture ven la on. Allow for some volume of
airspace around fi xture. Avoid covering LED fi xtures with insula on, foam, or other material that will prevent convec on
or conduc on cooling.
Unless individual product specifi ca ons deem otherwise: Do not exceed fi xtures maximum ambient temperature.
Only use fi xture in its intended loca on.
LED products are Polarity Sensi ve. Ensure proper Polarity before installa on.
Electrosta c Discharge (ESD): ESD can damage LED fi xtures. Personal grounding equipment must be worn during all
installa on or servicing of the unit.
Do not touch individual electrical components as this can cause ESD, shorten lamp life, or alter performance.
Some components inside the fi xture may not be serviceable. In the unlikely event your unit may require service, stop
using the unit immediately and contact an ABL representa ve for assistance.
Always read the fi xtures complete installa on instruc ons prior to installa on for any addi onal fi xture specifi c warnings.
CAUTION: RISK OF PRODUCT DAMAGE
Please see product specifi c installation instructions for additional warnings or any applicable FCC or other regulatory statements.
Failure to follow any of these instructions could void product warranties. For a complete listing of product Terms and Conditions, please visit www.acuitybrands.com.
Our Brands Indoor/Outdoor Indoor Lighting Outdoor Lighting Controls Daylighting
Lithonia Lighting Gotham American Electric Lighting DARK TO LIGHT SunOptics
Carandini Mark Architectural Lighting Antique Street Lamps LC&D
Holophane Peerless Hydrel ROAM
RELOC Renaissance Ligh ng Tersen Sensor Switch
Light Concepts Winona Lighting Synergy
Acuity Brands Lighting, Inc. assumes no responsibility for claims arising out of improper or careless installation or handling of its products.
ABL LED General Warnings, Form No. 503.203
© 2010 Acuity Brands Lighting, Inc. All rights reserved. 12/01/10