Specification

One Lithonia Way • Conyers, Georgia 30012 • Phone: [phone] • www.lithonia.com
© 2013-2018 Acuity Brands Lighting, Inc. All rights reserved
TWR2 LED
Rev. 03/28/18
TWR2 LED
Series Performance Package Color Temperature Voltage Controls Finish
TWR2 LED P1 8,150 lumens
P2 9,700 lumens
40K 4000 K
50K 5000 K
1
MVOLT
2
347
(blank) No controls
PE Photo control
DDBTXD Textured Dark bronze
TWR2 LED
LED Wall Luminaire
Ordering Information
EXAMPLE: TWR2 LED P1 50K MVOLT DDBTXD
NOTES
1 Correlated color temperature (CCT) shown is nominal per
ANSI C78, 377-2015.
2 MVOLT driver operates on any line voltage from 120-
277V (50/60 Hz).
Catalog
Number
Notes
Type
Hit the Tab key or mouse over the page to see all interactive elements.
Introduction
This popular TWR2 wall luminaire combines
classic day form with long-lasting, energy-efficient
LED technology - perfect for Metal Halide
replacements.
The TWR2 LED luminaire replaces up to a 400W
metal halide luminaire while saving up to 85%
in energy costs. With an expected service life of
more than 20 years, the TWR2 LED eliminates
frequent lamp and ballast replacements
associated with traditional technologies.
Width:
17”
(43.2 cm)
Height:
9”
(22.9 cm)
Depth:
9-5/16”
(23.6 cm)
Weight:
17.2 lbs
(7.8 kg)
Specifications
H
W
D
FEATURES & SPECIFICATIONS
INTENDED USE
The TWR2 LED combines traditional wall pack design with energy-efficient, low maintenance LEDs for
replacing up to 400W Metal Halide luminaires. The traditional shape helps maintain building aesthetics
when replacing only a portion of your building’s wall packs. TWR2 LED is ideal for outdoor applications
such as carports, loading areas, driveways and parking areas.
CONSTRUCTION
Cast aluminum housing with bronze polyester powder paint for lasting durability. Door is hinged
on the side and swings out of the way during installation and service. Castings are sealed with a
one-piece gasket. Rated for outdoor installations, -40ºC minimum ambient.
ELECTRICAL
Long-lasting, energy efficient LEDs maintain 70% or more of light output after 100,000 hours
of service life (L70/100,000 hours). MVOLT driver operates on any line voltage from 120-277V
(50/60Hz). 10kV surge protection included.
INSTALLATION
Designed for wall mounting four feet or higher from ground. Housing is configured for mounting
directly over a standard 4” outlet box (by others) or for surface wiring via any of three convenient
1/2” threaded conduit entry hubs.
LISTINGS
UL Listed to U.S. and Canadian safety standards for wet locations. Tested in accordance with
IESNA LM-79 and LM-80 standards.
DesignLights Consortium® (DLC) qualified product. Not all versions of this product may
be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org to
confirm which versions are qualified.
WARRANTY
5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.