Specification

ManualsBrandsLithonia Lighting ManualsOther1-Light Compact Fluorescent Twin Tube Dark Bronze Wall Pack

FEATURES & SPECIFICATIONS

INTENDED USE

For entrances, stairwells, corridors and other pedestrian areas.

CONSTRUCTION

Cast aluminum backplate. Gasketing between backplate and front cover pre-

vents the entry of water and contaminants. External hardware includes

phillips head and tamper-proof hex-head fasteners.

FINISH

Dark bronze (DDB) or white (DWH) front cover available for all wattages.

OPTICAL SYSTEM

Front cover/refractor is injection-molded, one-piece, UV-stabilized polycar-

bonate. The optical system is sealed and gasketed to inhibit the entrance of

outside contaminants.

ELECTRICAL SYSTEM

The 13W fluorescent uses a 120V electro-magnetic ballast and includes a

twin tube fluorescent lamp as standard. The 26/42W fluorescent uses a multi-

volt electronic ballast and offers the option of 120-277V operation and also

the option of 26W, 32W or 42W triple tube fluorescent lamp (not included).

INSTALLATION

Units are for wall mounting and include two 3/4" knockouts for routing electri-

cal conduit.

LISTING

UL listed for wet locations. Listed and labeled to comply with Canadian Standards.

Small Polycarbonate Wall Pack

TWS

COMPACT FLUORESCENT

13TT

26TRT, 32TRT,42TRT

8' to 12' Mounting

NOTES:

1 Ships as 26/42 TRT. Operates 26-42 watt as

standard based on lamp choice.

2 Not available with 13TT.

Catalog Number

Notes

Type

Outdoor

Sheet #: TWS-CF BM-420

Voltage

120

MVOLT

TWS

Wattage/lamp

13TT One 13W twin-tube lamp

26TRT One 26W 4-pin tri-tube

lamp

32TRT One 32W 4-pin tri-tube

lamp

42TRT One 42W 4-pin tri-tube

lamp

Series

TWS

Options

Shipped installed in fixture

PE Photoelectric cell as standard(N/A with MVOLT)

LPI Lamp included as standard for 13TT only

L/LP Less lamp standard for 26/42TRT

Architectural colors (optional)

(blank) Dark bronze

DWH White

Specifications

Height: 11" (27.9cm)

Width: 6-1/2" (16.5cm)

Depth: 5-1/4" (13.3cm)

Weight: 3.3 lbs./1.5 kgs

Accessories

Order as separate catalog number

RK1 PEB1 Photocell kit (120V only)

TWSWG Wireguard

ORDERING INFORMATION

For shortest lead times, configure product using standard options (shown in bold).

Example: TWS 13TT 120 PE LPI

Summary of content (2 pages)

PAGE 1
Catalog Number Notes Type FEATURES & SPECIFICATIONS INTENDED USE Small Polycarbonate Wall Pack For entrances, stairwells, corridors and other pedestrian areas. CONSTRUCTION TWS Cast aluminum backplate. Gasketing between backplate and front cover prevents the entry of water and contaminants. External hardware includes phillips head and tamper-proof hex-head fasteners.
PAGE 2
TWS Fluorescent Wall-Pak TWS 26TRT TEST NO: LTL12664P 0 0.5 0.25 1 2 3 -1 0 1.5 1 1 0.5 0.25 2 3 2 3 4 -1 0 1.5 1 1 0.5 0.25 2 3 4 4 4 1 -2 -2 DISTANCE IN UNITS OF MOUNTING HEIGHT -1 TEST NO: LTL12633 ISOILLUMINANCE PLOT (Footcandle) -2 0 TWS 32TRT ISOILLUMINANCE PLOT (Footcandle) 0 5 1 2 3 4 5 0 1 2 3 4 Luminaire Efficiency: 52.2% 13W compact fluorescent twin tube lamp Footcandle values based on 8' Luminaire Efficiency: 55.