Cut Sheet

ManualsBrandsLithonia Lighting ManualsFluorescent4' Heavy Duty Striplight, T12

Table Of Contents

LITHONIA COMMERCIAL & INDUSTRIAL FLUORESCENT

www.lithonia.com | 1-800-858-7763PSG10

LOW BAY INDUSTRIALS

Series

1,4

Number of lamps

Lamp type

Voltage

UN Three or four lamps, heavy-duty strip

2UN Two lamps, heavy-duty strip

EJ Three or four lamps, solid top

EJA Three or four lamps, uplight

2EJ Two lamps, solid top

2EJA Two lamps, uplight

14T5 14W T5 (22")

17 17W T8 (24")

20 20W T12 (24")

21T5 21W T5 (34")

24 24W T12 slimline (24")

24HO 35W T12 800mA (24")

25 25W T8 (36")

28T5 28W T5 (46")

32 32W T8 (48")

36 36W T12 slimline (36")

36HO 45W T12 800mA (36")

48 38W T12 slimline (48")

48HO 60W T12 800mA (48")

54T5HO 54W T5HO (46")

72 55W T12 slimline (72")

72HO 85W T12 800mA (72")

96T8 96W T8 slimline (96")

96T8HO 96W T8 T8HO (96")

96HO 110W T12 800m A (96")

96VHO 210W T12 1500m A (96")

MVOLT

120

277

347

Ballast conguration Ballast Options

(blank) 1- and/or 2-lamp ballasts per

Lithonia Lighting standards

1/3 One 3-lamp ballast

1/4 One 4-lamp ballast

GEB10IS T8 electronic ballast, ≤10% THD,

instant start

GEB10RS T8 electronic ballast, ≤10% THD,

program rapid start

GEB10PS T5 electronic ballast, ≤10% THD,

program start

GEB T12 electronic ballast, ≤20% THD

EL14 Emergency battery pack

EL55 Emergency battery pack (nominal 350-700 lumens)

EL65 Emergency battery pack (nominal 725-1325 lumens)

GLR Internal fast-blow fusing

5,6

GMF Internal slow-blow fusing

5,6

PLF Plug-in wiring; specify 1, 2 or 3 branch circuits and hot wires (A=black, B=red, C=blue, AB or AC)

TILW Tandem in-line wiring

CSA Meets Canadian standards

NOM Meets Mexican standards

Intended Use

Use for applications requiring

high illumination in medium

to high mounting heights

and a rugged, heavy-duty

strip design.

Construction

Heavy-duty formed channel

with high-gloss, baked white

polyester nish.

EJ: Solid-top reector

or uplight is available.

Premium-gauge channel

features gripper-back design

for strength and rigidity.

Lampholders secured by

screwed-on end plates.

Heavy-duty row connector

furnished for continuous

mounting.

For wireguards and mounting

accessories, see page 93.

Electrical

Ballast: Thermally protected,

resetting, Class P, HPF, non-

PCB, UL Listed, CSA Certied

ballast is standard. Sound

rating depends on lamp/

ballast combination.

Wiring and electrical:

AWM, TFN or THHN wire

used throughout, rated for

required temperatures.

Ballast disconnect provided

standard where required

to comply with U.S. and

Canadian electrical codes.

Listings

UL Listed. CUL Listed or CSA

Certied to Canadian standards.

NOM Certied – optional.

ORDERING INFORMATION

For shortest lead times, congure products using bolded options.

Example: EJ 2 32 MVOLT GEB10IS

ADDITIONAL INFORMATION

For additional product information, visit www.lithonia.com.

CONFIGURATIONS

SERIES

LAMPS

PER CROSS

SECTION

LAMPS

PER

FIXTURE

LAMP TYPE

WIDTH: UN

IN. CM

WIDTH: EJ

IN. CM

DEPTH

IN. CM

LENGTH

IN. CM

UN, EJ 3, 4 3, 4 14T5, 17, 24, 24HO 9 (22.9) 12 (30.5) 3-3/4 (9.5) 24 (69.9)

UN, EJ 3, 4 3, 4 21T5, 25, 36, 36HO, 39HO 9 (22.9) 12 (30.5) 3-3/4 (9.5) 36 (91.4)

UN, EJ 3, 4 3, 4 28T5, 32, 48, 48HO, 54T5HO 9 (22.9) 12 (30.5) 3-3/4 (9.5) 48 (121.9)

2UN, 2EJ 2 2 28T5, 32, 48, 48HO, 54T5HO 9 (22.9) 16 (40.6) 3-3/4 (9.5) 48 (121.9)

UN, EJ 3, 4 3, 4 72, 72HO 9 (22.9) 12 (30.5) 3-3/4 (9.5) 72 (182.9)

UN, EJ 3, 4 3, 4 96HO, 96T8HO 9 (22.9) 12 (30.5) 3-3/4 (9.5) 96 (243.8)

2UN, 2EJ 2 2 96HO, 96T8HO 9 (22.9) 16 (40.6) 3-3/4 (9.5) 96 (243.8)

TUN, TEJ 3, 4 6, 8 14T5, 17, 24, 24HO 9 (22.9) 16 (40.6) 3-3/4 (9.5) 48 (121.9)

TUN, TEJ 3, 4 6, 8 21T5, 25, 36, 36HO, 39HO 9 (22.9) 16 (40.6) 3-3/4 (9.5) 72 (182.9)

TUN, TEJ 3, 4 6, 8 28T5, 32, 54T5HO 9 (22.9) 16 (40.6) 3-3/4 (9.5) 96 (243.8)

T2UN, T2EJ 2 4 28T5, 32, 54T5HO 9 (22.9) 16 (40.6) 3-3/4 (9.5) 96 (243.8)

T2UN, T2EJ 2 4 96T8, 96T8HO, 96HO, 96VHO 9 (22.9) 16 (40.6) 3-3/4 (9.5) 192 (487.7)

Drawings are for dimensional detail only and may not represent actual

mechanical conguration. Dimensions are shown in inches (centimeters)

unless otherwise noted.

(22.9)

3-3/4

(9.5)

(30.5)

3-3/4

(9.5)

Notes

1 For tandem double-length unit, add prex T. Example: TUN.

2 See Congurations table for lamp compatibility.

3 Available only with CSA option.

4 Consult factory for additional T12 and T12HO congurations.

5 Specify voltage.

6 Not available in Canada.

Heavy-Duty

PRODUCT INFORMATION

Summary of content (3 pages)

PAGE 1
Intended Use Use for applications requiring high illumination in medium to high mounting heights and a rugged, heavy-duty strip design. Lampholders secured by screwed-on end plates. Construction Heavy-duty formed channel with high-gloss, baked white polyester finish. For wireguards and mounting accessories, see page 93. Heavy-duty row connector furnished for continuous mounting. Electrical Ballast: Thermally protected, resetting, Class P, HPF, nonPCB, UL Listed, CSA Certified ballast is standard.
PAGE 2
LOW BAY INDUSTRIALS Heavy-Duty PRODUCT INFORMATION Intended Use Use for applications requiring high illumination in mounting heights up to 20'. Ideal for warehouses, aisle and retail applications, and a rugged, heavy-duty strip design. UNS EJS Construction Premium-gauge channel features gripper-back design for strength and rigidity. UNS High-gloss, baked white polyester finish. EJS: Solid-top reflector or uplight is available.
PAGE 3
Intended Use Use for applications requiring magnetic or VHO ballast where high illumination is required. These products are suitable for mounting heights up to 20'. Ideal for task, aisle and warehouse lighting. Lampholders secured by screwed-on end plates. Construction High-gloss, baked white polyester finish. Electrical Ballast disconnect provided standard where required to comply with U.S. and Canadian electrical codes. Premium-gauge channel features gripper-back design for strength and rigidity.