Cut Sheet

LITHONIA SPECIAL APPLICATIONS
145
www.lithonia.com | 1-800-315-4963PSG10
ROUGH SERVICE UTILITARIAN
Series Lamp type
1
Lens Voltage Ballast conguration
VR3C
VR4C
VR4CV
Twin-tube
2
2/7TT
2/9TT
13TT
2/13TT
Double twin-tube
13DTT
2/13DTT
18DTT
2/18DTT
26DTT
2/26DTT
Triple-tube
26TRT
2/26TRT
32TRT
2/32TRT
42TRT
2/42TRT
High pressure sodium
35S
2
50S
70S
100S
150S
Metal halide
50M
3,4
70M
3
100M
150M
3
175M
Ceramic
metal halide
50MHC
70MHC
100MHC
150MHC
(blank) Clear prismatic
WP White polycarbonate
120
208
5
240
5
277
347
480
5
TB
5,6
MVOLT
7, 8
(blank) Standard conguration
2/1 Two 1-lamp ballasts
7
Ballast Options
12
Lamped
17
(blank) Standard ballast
ADEZ Advance® Mark X® electronic dimming ballast
7, 9, 10
DMHL LUTRON® Hi-lume® electronic dimming ballast
7, 9,10 , 11
Pulse start metal halide
For shipments to U.S. territories, SCWA must be specied to
comply with EISA.
SCWA Super CWA pulse start ballast
5
SF Single fuse (120, 277, 347V)
5,9
IR Internal reector
15
DF Double fuse (208, 240, 480V)
5,9
GLR Internal fast-blow fusing
7, 9
DS Dual switching
7,1 3
GMF Internal slow-blow fusing
7, 9
QRS Quartz restrike system
3,5,14
CSA Meets Canadian standards
EC Emergency circuit (incandescent, 25W max)
14
NOM Meets Mexican standards
5,16
NL Night light (incandescent, 7W max)
2,14
INTL Available for MH probe start shipping outside the U.S.
PE Photoelectric cell (button type)
9
LPI Lamp(s) included
(standard)
L/LP Less lamp(s)
Intended Use
General illumination for rough
service (vandal-resistant)
applications. Ideal for areas
that require higher levels
of protection from physical
assault, while providing
proper illumination for
safety or security. Certain
airborne contaminants
can diminish integrity of
acrylic. Refer to Acrylic En-
vironmental Compatibility
tables on pages 794-795
for suitable uses.
Construction
Housing: One-piece, die-cast
aluminum, low-copper
alloy, nished in dark bronze
polyester powder coat.
Optics
Lens: Clear prismatic
polycarbonate, UV-stabilized,
nominal thickness .125". Lens
secured by stainless steel
tamper-resistant TORX® T-20 or
standard stainless steel slotted
hex-head screws (four each
included). One-piece silicone
perimeter gasket seals out
moisture and contaminants.
Reector: VR3C, VR4C: Hori-
zontal reector, ceiling-mount
or wall-mount (with IR option).
VR4CV: Vertical reector,
ceiling-mount only.
Electrical
Ballast: Fluorescent:
Electronic, HPF multi-volt,
starting temperature of 0°F.
(7TT is electromagnetic, 120V
only.) High pressure sodium:
High-reactance, HPF (35S is
NPF). 50 –150W MH ballast are
high-reactance, high power
factor and are standard with
pulse start ignitor technology
(SCWA not required). 175W
MH is constant wattage auto-
transformer (CSA, NOM or INTL
required for shipments outside
the U.S.). Super CWA (pulse
start ballast), 88% ecient
and EISA legislation compliant
is required for 175W MH (SCWA
option) U.S. shipments only.
Socket: Fluorescent: Horizon-
tally mounted thermoplastic.
HID: Medium-base porcelain
with copper alloy, nickel-
plated screw shell and center
contact. UL listed 660W, 600V,
4KV pulse rated.
Lamps: 35K four-pin lamp(s)
standard for compact uores-
cent. MH: Reduced-UV lamp is
standard. Included unless L/LP
is specied. Ceramic metal ha-
lide lamps are recommended
for use in application where
superior color rendition, lumen
maintenance and longer lamp
life are desired.
Installation
Three 1/2" threaded plugs for
conduit entry or mount over
outlet box. Four mounting
holes for maximum vandal
resistance.
Listings
UL Listed (standard). CSA
Certied or NOM Certied (see
Options). UL Listed for 25°C
ambient and wet locations
for wall-mount and covered-
ceiling applications.
ORDERING INFORMATION
For shortest lead times, congure products using bolded options.
Example: VR3C 2/26TRT MVOLT LPI
ADDITIONAL INFORMATION
For additional product information, visit www.lithonia.com.
L/W
Length/Width: 8-3/4 (22.2) 12 (30.5)
Overall depth: 8 (20.3) 9-1/2 (24.1)
Housing depth: 3-3/4 (9.5) 4 (10.2)
VR3C VR4C/VR4CV
OD
HD
Notes
1 See Congurations table for lamp compatibility.
2 120V only.
3 Not available in 480V.
4 Not available with 120V
5 Available for HID units only.
6 Multi-tap ballast. US: 120V, 208V, 240V, 277V. Canada: 120V/347V.
7 Available for compact uorescent units only.
8 Multi-volt electronic ballast (for DTT and TRT lamps) capable of operating
on any line voltage between 120V and 277V.
9 Must specify voltage. Not available with MVOLT or TB.
10 Available with 26DTT and all single TRT lamps; excludes 42TRT.
11 Available with 2/26TRT - VR4C only.
12 For other options and accessories, see Accessories table and pages 148-149.
13 Cannot be ordered with EC or PE options.
14 Maximum wattage lamp provided.
15 HID wall-mounted units require IR option.
16 Consult factory for availability.
17 Lamp(s) included unless L/LP is specied.
ACCESSORIES
ORDER SEPARATELY
RK1 T20BIT
TORX® TX20 hex-base driver bit for tamper-resistant
screws with center reject pin
RK1 T20DRV
TORX® TX20 screwdriver for tamper-resistant screws
with center reject pin
V R 3 C
V R 4 C
VR4CV
Drawings are for dimensional detail only and may not represent actual
mechanical conguration. Dimensions are shown in inches (centimeters)
unless otherwise noted.
Squares
CONFIGURATIONS
SERIES LAMP TYPE
VR3C
2/7TT, 2/9TT, 13DTT, 2/13DTT, 18DTT, 2/18DTT, 26DTT,
2/26DTT, 26TRT, 2/26TRT, 32TRT, 42TRT, 35S, 50S, 70S,
100S, 50M, 70M, 50MHC, 70MHC, 100MHC
VR4C
2/7TT, 2/9TT, 13TT, 2/13TT, 13DTT, 2/13DTT, 18DTT,
2/18DTT, 26DTT, 2/26DTT, 26TRT, 2/26TRT, 32TRT, 42TRT,
2/42TRT, 35S, 50S, 70S, 100S, 50M, 70M, 100M, 50MHC,
70MHC, 100MHC
VR4CV
35S, 50S, 70S, 100S, 150S, 50M, 70M, 100M, 150M,
175M, 50MHC, 70MHC, 100MHC, 150MHC
VR3C
VR4C, VR4CV
PRODUCT INFORMATION