Specification Sheet

Wafer LED Recessed Downlight
WF4 Square
4" LED Switchable White
Color Temperature
IC/Non-IC
New Construction/Remodel
Specifications
Aperture: 3.2 (8.1)
Ceiling opening: 4.2 (10.7)
Overlap trim: 4.7 (12.0)
Height: 1.1 (2.8)
All dimensions are inches (centimeters) unless otherwise indicated.
FEATURES & SPECIFICATIONS
INTENDED USE — The 4" Wafer™ LED Square Downlight with Switchable White provides high-quality light
output and efficiency featuring a switch for easy color temperature adjustment - while eliminating the need
for recessed housings. The innovative, slim design allows for easy retrofit, remodel or new construction
installation from below the ceiling. The Wafer LED downlight is wet location listed – making it ideal for use
in a breadth of outdoor residential, hospitality, commercial and multifamily applications.
CONSTRUCTION — Aluminum die cast outer frame. Durable, powder coat paint to prevent rust. FT4 plenum
rated cable connector to connect from module to remote driver box. IC rated driver with convenience and
value of two remote selectable color temperature options, each with a setting choice to chose either 2700K,
3000K, and 3500K or 3000K, 4000K, and 5000K using the switch. The isolated driver integrated inside steel
remote box with four 7/8" knockouts with slots for pryout. Suitable for pulling wires with the 12 cubic-inch
wiring compartment to accommodate up to (6) 14 gauge insulated conductors; making the Wafer LED
Downlights much easier to wire in 2in/2out (plus ground) daisy-chain applications and contractor friendly.
INSTALLATION — Ideal for shallow ceiling plenum; no housing required. Steel spring clip for easy
installation. 4" cut out template is provided to ensure a correct sized hole is cut into ceiling for proper
installation of the trim. Size of hole should not exceed 4 1/4 inches for this product. Suitable for installation
in t-grid and drop ceiling applications. 3" plenum space required for installation of the remote driver box.
OPTICS — Edge-lit LED technology uses light guided plate to distribute light. Polycarbonate lens provides
even illumination throughout the space.
ELECTRICAL — Connect directly to 120V power supply via provided UL recognized driver. High efficient
driver with power factor > 0.9. Ambient operating temperature: -40°F (-40°C) to +104°F (+40°C). Dimming
down to 10% with most standard incandescent dimers (see list of approved dimmers). Replaces 65W
incandescent.
LISTINGS — CSA certified to US and Canadian safety standards. ENERGY STAR® certified. Wet location. Air
Tight certified in accordance with ASTM E283-2004. NOM Certified. Can be used to comply with California
Title 24 Part 6 High Efficacy LED light Source Requirements.
WARRANTY — 5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
D
I
M
M
A
B
L
E
Catalog
Number
Notes
Type
Matte black Brushed nickel Oil-rubbed bronze
3"
(7.6)
1.3"
(3.3)
5.5"
(13.9)
2.89 [73.3 mm]
4.72 [120.0 mm]
4.09 [104.0 mm]
.20 [5.0 mm]
.58 [14.7 mm]
1.21 [30.7 mm]
4.72
DOWNLIGHTING WF4 SQ LED - Switchable White
WF4 LED
Series Trim Style Lamp CCT/W/Lumens
1
CRI Finish
WF4 4" wafer-thin LED downlight SQ B Baffle
S Smooth
LED LED 27K30K35K 2700K/10.5W/730L
3000K/10.5W/800L
3500K/10.5W/780L
30K40K50K 3000K/10.5W/750L
4000K/10.5W/810L
5000K/10.5W/790L
90CRI 90CRI MW Matte White
MB Matte Black
BN Brush Nickel
ORB Oil-Rubbed Bronze
ORDERING INFORMATION
For shortest lead times, configure product using standard options (shown in bold).
Example: WF4 SQ B LED 30K40K50K 90CRI MW
Accessories: Order as separate catalog number.
WF8643 Pan U Universal new construction pan
WFJB U Remodel joist bar
Notes
1 Total system delivered
lumens.
WF8643 Universal
New Construction Pan
Remodel Joist Bar

Summary of content (6 pages)