Specification

ManualsBrandsLithonia Lighting ManualsLighting6 in. Selectable CCT New Construction/Remodel White Recessed Integrated LED Kit

Wafer

™

LED Recessed Downlight

WF6 MVOLT

6" LED SWITCHABLE WHITE

COLOR TEMPERATURE

IC/Non-IC

New Construction/Remodel

Speciﬁcations

Aperture: 4.9 (12.4)

Ceiling opening: 6 (15.2)

Overlap trim: 6.7 (17)

Height: 1.1 (2.8)

All dimensions are inches (centimeters) unless otherwise indicated.

FEATURES & SPECIFICATIONS

INTENDED USE — The 6" Wafer™ LED Downlight with switchable white technology provides high-quality

light output and eﬃciency featuring a switch for easy color temperature adjustment - while eliminating

the need for recessed housings. The innovative, slim design allows for easy remodel or new construction

installation from below the ceiling. The LED module maintains at least 70% light output for 50,000 hours.

The Wafer is ideal for use in light commercial, multi-family, assisted living, dormitories, hospitals, and

hospitality.

CONSTRUCTION — Aluminum die cast outer frame, durable powder coat paint to prevent rust. Durable,

powder coat paint to prevent rust. FT4 plenum rated cable connector to connect from module to remote

driver box. IC rated driver with convenience and value of two remote selectable color temperature options,

each with a setting choice to chose either 2700K, 3000K, and 3500K or 3000K, 4000K, and 5000K using

the switch. The isolated driver integrated inside steel remote box with four 7/8" knockouts with slots for

pryout. Suitable for pulling wires with the 12 cubic-inch wiring compartment to accommodate up to (6)

14 gauge insulated conductors; making the Wafer LED Downlights much easier to wire in 2in/2out (plus

ground) daisy-chain applications and contractor friendly. Three "quick connect" push-in terminals included.

INSTALLATION — Ideal for shallow ceiling plenum; no housing required. Steel spring clip for easy

installation. 6" cut out template provided to ensure correct sized hole is cut into ceiling for proper installation

of the trim. Size of hole should not exceed 6 1/4 inches for this product. Suitable for installation in t-grid

and drop ceiling applications with the WF8643 Pan. 2" plenum space required for installation of the remote

driver box.

OPTICS — Edge-lit LED technology uses light guided plate to distribute light. Polycarbonate lens provides

even illumination throughout the space.

ELECTRICAL — Multi-volt (120-277V, 50/60Hz) proprietary remote LED driver/splice box, with two

(2) additional low-voltage wires for 0-10v dimming, down to 10% (depending on dimmer model and

application). High eﬃcient driver with power factor > 0.9. Ambient operating temperature: -40°F (-40°C)

to +104°F (+40°C).

LISTINGS — CSA certiﬁed to Canadian and US Safety Standards. ENERGY STAR® certiﬁed product. Air Tight

certiﬁed in accordance with ASTM E283-2004. Wet Location Listed. NOM Certiﬁed. Can be used to comply

with California Title 24 Part 6 High Eﬃcacy LED light Source Requirements.

WARRANTY — 5-year limited warranty. Complete warranty terms located at:

www.acuitybrands.com/support/customer-support/terms-and-conditions

Note: Actual performance may diﬀer as a result of end-user environment and application.

All values are design or typical values, measured under laboratory conditions at 25 °C.

Speciﬁcations subject to change without notice.

DOWNLIGHTING WF6 MVOLT Switchable White

ORDERING INFORMATION

For shortest lead times, conﬁgure product using standard options (shown in bold).

Example: WF6 LED 30K40K50K MVOLT 90CRI MW

Catalog

Number

Notes

Type

4.9"

(12.4)

5.9"

(12.4)

6.7"

(17.0)

1.1"

(2.8)

Accessories: Order as separate catalog number.

WF6 PAN R12 6" new construction pan, retail pack of 12

WF8643 Pan U Universal new construction pan

WFJB U Remodel joist bar

WFEXC6 SW3PIN FT4 3-Pin 6ft Cable

WFEXC10 SW3PIN FT4 3-Pin 10ft Cable

WFEXC20 SW3PIN FT4 3-Pin 20ft Cable

Notes

1 Total system delivered lumens.

Joist

WFEXC6 Cable

3.0 (7.7 cm)

1.3

(3.3 cm)

5.5 (14.0 cm)

WF6

Series Lamp CCT/CRI/W/Lumens

Voltage CRI Finish

WF6 6" Wafer

LED

downlight

LED LED 27K30K35K

2700K/14W/1070L

3000K/14W/1150L

3500K/14W/1110L

30K40K50K

3000K/14W/1090L

4000K/14W/1190L

5000K/14W/1120L

MVOLT Multi-Volt (120-277V) 90CRI 90CRI MW Matte white

WF8643 Universal

New Construction Pan

WF6_Pan

Summary of content (4 pages)

PAGE 1
Catalog Number Notes FEATURES & SPECIFICATIONS INTENDED USE — The 6" Wafer™ LED Downlight with switchable white technology provides high-quality light output and efficiency featuring a switch for easy color temperature adjustment - while eliminating the need for recessed housings. The innovative, slim design allows for easy remodel or new construction installation from below the ceiling. The LED module maintains at least 70% light output for 50,000 hours.
PAGE 2
EFFECTIVE FLOOR CAVITY REFLECTANCE: 80 70 50 30 10 RCC %: RW %: 70 50 30 0 50 30 20 50 30 20 50 30 20 70 50 30 0 RCR: 0 1.19 1.19 1.19 1.19 1.16 1.16 1.16 1.00 ™ 1.11 1.11 1.11 1.06 1.06 1.06 1.02 1.02 1.02 1 1.09 1.04 .99 .96 1.06 1.01 .98 .84 .97 .94 .91 .93 .91 .88 .90 .88 .86 2 .99 .90 .84 .78 .96 .88 .82 .71 .85 .80 .75 .82 .77 .73 .79 .75 .72 3 .90 .79 .71 .65 .88 .78 .70 .60 .75 .68 .63 .72 .66 .62 .69 .65 .61 4 .82 .70 .62 .55 .80 .69 .61 .52 .67 .59 .54 .64 .58 .53 .62 .57 .52 5 .76 .63 .54 .47 .
PAGE 3
70-100 90-120 246.4 21.3% 108.3 9.4% 0 0% 1154.6 100% COEFFIC 0-90 MVOLT 1154.6 100% WF6 SWITCHABLE WHITE 6" LED Wafer Module 90-180 0 0% 0-180 PHOTOMETRICS ™ WF6 LED 30K40K50K MVOLT 90CRI, 3000K LED's, input watts: 13.83, delivered lumens: 1112, lm/w=80.4, test no.
PAGE 4
WF6 MVOLT SWITCHABLE WHITE 6" LED Wafer™ Module ENERGY DATA WF6 LED 27K30K35K MVOLT Color Temperature WF6 LED 30K40K50K MVOLT 2700K 3000K 3500K 1070 1150 1110 90 90 90 Rated wattage 14.1 13.4 13.9 Lu/Watts 75.9 85.8 79.9 -40°C (-40°F) -40°C (-40°F) FCC Title 47 CFR, Part 15, Class B FCC Title 47 CFR, Part 15, Class B Class A Standards Class A Standards Lumens CRI Min.