Specification Sheet

ManualsBrandsLithonia Lighting ManualsLighting6 in. Wafer Square Smooth White Selectable New Construction/Remodel Integrated LED Recessed Kit

Wafer LED Recessed Downlight

WF6 Square

6" LED Module

IC/Non-IC

New Construction/Remodel

Speciﬁcations

Aperture: 4.9 (12.4)

Ceiling opening: 6 (15.2)

Overlap trim: 6.7 (17)

Height: 1.1 (2.8)

All dimensions are inches (centimeters) unless otherwise indicated.

FEATURES & SPECIFICATIONS

INTENDED USE — The 6" Wafer-Thin LED square recessed downlight with remote driver box combines high

quality light output and eﬃciency while eliminating the pot light housing for competitive aﬀordability. This

innovative wafer-slim Type IC design allows easy installation for new construction or remodel from below

the ceiling without the requirement of a pot light housing. The LED module maintains at least 70% light

output for 36,000 hours. These LED Wafer downlights are intended for closets, attics, hallways, bathrooms,

kitchens, basements, soﬃts, entry ways, porches, garages, stairwells, corridors, nursing/retirement homes,

condos, elevators, apartments, and any other small areas.

CONSTRUCTION — Ideal for shallow ceiling plenum since a pot light housing is NOT required. IC rated

driver and ﬁxture - approved for direct contact with insulation. Aluminum die cast outer frame. Durable,

powder coat paint to prevent rust. Square ﬁxture with integral edge-lit LED's. Steel spring clip for easy

installation. Plenum rated cable connector to connect from module to remote driver box. Isolated driver

integrated inside steel remote box with four 7/8" knockouts with slots for pryout. Suitable for pulling wires

with the 12 cubic-inch wiring compartment to accommodate up to (8) 14 gauge insulated conductors, or

(6) 12 gauge insulated conductors; making the Wafer LED Downlights much easier to wire in 2in/2out (plus

ground) daisy-chain applications and contractor friendly.

PATENT PENDING.

INSTALLATION — Ideal for shallow ceiling plenum; no housing required. Steel spring clip for easy

installation. 6" cut out template is provided to ensure a correct sized hole is cut into ceiling for proper

installation of the trim. Size of hole should not exceed 6 1/4 inches for this product. Suitable for installation

in t-grid and drop ceiling applications. 2" plenum space required for installation of the remote driver box.

OPTICS — Wafer-Thin downlight edge-lit LED technology uses light guided plate to distribute light.

Polycarbonate lens provides even illumination throughout the space. Utilized 2700K, 3000K, 3500K, 4000K,

and 5000K color temperature LEDs.

ELECTRICAL — Connect directly to 120V power supply via provided UL recognized driver. High eﬃcient

driver with power factor > 0.9. Ambient operating temperature: -40°F (-40°C) to +104°F (+40°C). Dimming

down to 10% (See page 4 for recommended dimmers). Standard input wattage is 13W, 65 lumens per watt.

Replaces 75W incandescent.

LISTINGS — CSA certiﬁed to US and Canadian safety standards. ENERGY STAR® certiﬁed product. Wet

location. Air Tight certiﬁed in accordance with ASTM E283-2004. NOM Certiﬁed.

WARRANTY — 5-year limited warranty. Complete warranty terms located at:

www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

Note: Actual performance may diﬀer as a result of end-user environment and application.

All values are design or typical values, measured under laboratory conditions at 25 °C.

Speciﬁcations subject to change without notice.

DOWNLIGHTING WF6 SQ

ORDERING INFORMATION

For shortest lead times, conﬁgure product using standard options (shown in bold).

Example: WF6 SQ B LED 30K MW

Catalog

Number

Notes

Type

Accessories: Order as separate catalog number.

WF6 PAN R12 6" new construction pan, retail pack of 12

WFJB U Remodel joist bar

WFEXC6 U 6' FT4 cable

WFEXC10 U 10' FT4 cable

WFEXC20 U 20' FT4 cable

Matte black Brushed nickel Oil-rubbed bronze

Notes

1 Total system

delivered lumens.

2 Only stocked in

Matte White ﬁnish,

enter non-stock

order for other color

ﬁnishes.

WF6 Pan Remodel Joist Bar Extension Cable

LED

Series Lamp CCT/CRI/W/Lumens

Finish

WF6 SQ B 6" wafer-thin square LED downlight, baﬄe trim

WF6 SQ S 6" wafer-thin square LED downlight, smooth trim

LED LED 27K 2700K/80CRI/13.9W/860L

30K 3000K/80CRI/13.4W/880L

35K

3500K/80CRI/13.2W/900L

40K 4000K/80CRI/13.9W/920L

50K

5000K/80CRI/14W/980L

MW Matte White

MB Matte Black

BN Brushed Nickel

ORB Oil-Rubbed Bronze

(7.6)

1.3"

(3.3)

5.5"

(13.9)

4.11 [104.3 mm]

6.69 [170.0 mm]

5.91 [150.0 mm]

.16 [4.2 mm]

.55 [13.9 mm]

1.18 [29.9 mm]

3.50 [89.0 mm]

6.6

9 [170.0 m

Summary of content (8 pages)

PAGE 1
Catalog Number Notes FEATURES & SPECIFICATIONS Type INTENDED USE — The 6" Wafer-Thin LED square recessed downlight with remote driver box combines high quality light output and efficiency while eliminating the pot light housing for competitive affordability. This innovative wafer-slim Type IC design allows easy installation for new construction or remodel from below the ceiling without the requirement of a pot light housing. The LED module maintains at least 70% light output for 36,000 hours.
PAGE 2
LUMENS PER LAMP: 870.1409 [_FAMILY] WF6 Downlight [_PRODUCTID]81ea3d21-84cc-4b21-820e-4c76d48db47b [_LAMPPOSITION]0 , 0 [_MOUNTING] REESSED DOWNLIGHT [_TOTALLUMINAIRELUMENS]870.2 [_PHYSICALDIMENSIONS]0.5, 0.5, 0 [_VLC_SIGNALING_APERTURE]0, 0, 0 [_ABSOLUTE] NOTE: DATA SHOWN IS ABSOLUTE FOR THE SAMPLE PROVIDED. [_ABSOLUTELUMENS]906.1 [_INPUT_ELECTRICAL]120.4 VOLTS, 14.0 WATTS, 0.118 AMPS [_SCALED_TEST] SCALED FROM ABSOLUTE TEST: ISF 33169S AND BASED ON NOMINAL SYSTEM PERFORMANCE. [_TEMP0] AMBIENT: 25.
PAGE 3
LUMENS PER LAMP: 944.2361 [_FAMILY] WF6 Downlight [_PRODUCTID]8b334485-57f5-4507-b01a-7ed461758929 [_LAMPPOSITION]0 , 0 [_MOUNTING] REESSED DOWNLIGHT [_TOTALLUMINAIRELUMENS]944.3 [_PHYSICALDIMENSIONS]0.5, 0.5, 0 [_VLC_SIGNALING_APERTURE]0, 0, 0 [_ABSOLUTE] NOTE: DATA SHOWN IS ABSOLUTE FOR THE SAMPLE PROVIDED. [_ABSOLUTELUMENS]906.1 [_INPUT_ELECTRICAL]120.4 VOLTS, 14.0 WATTS, 0.118 AMPS [_SCALED_TEST] SCALED FROM ABSOLUTE TEST: ISF 33167S AND BASED ON NOMINAL SYSTEM PERFORMANCE. [_TEMP0] AMBIENT: 25.
PAGE 4
LUMENS PER LAMP: 871.2568 [_FAMILY] WF6 Downlight [_PRODUCTID]d95fec7a-6910-4f7a-abc7-04a6ae3b4e43 [_LAMPPOSITION]0 , 0 [_MOUNTING] RECESSED DOWNLIGHT [_TOTALLUMINAIRELUMENS]871.3 [_PHYSICALDIMENSIONS]0.5, 0.5, 0 [_VLC_SIGNALING_APERTURE]0, 0, 0 [_ABSOLUTE] NOTE: DATA SHOWN IS ABSOLUTE FOR THE SAMPLE PROVIDED. [_ABSOLUTELUMENS]896.7 [_INPUT_ELECTRICAL]120.4 VOLTS, 14.3 WATTS, 0.120 AMPS [_SCALED_TEST] SCALED FROM ABSOLUTE TEST: ISF 33186S AND BASED ON NOMINAL SYSTEM PERFORMANCE. [_TEMP0] AMBIENT: 25.
PAGE 5
LUMENS PER LAMP: 923.6541 [_FAMILY] WF6 Downlight [_PRODUCTID]95704515-0874-4153-b434-3a6a56826fc6 [_LAMPPOSITION]0 , 0 [_MOUNTING] RECESSED DOWNLIGHT [_TOTALLUMINAIRELUMENS]923.7 [_PHYSICALDIMENSIONS]0.5, 0.5, 0 [_VLC_SIGNALING_APERTURE]0, 0, 0 [_ABSOLUTE] NOTE: DATA SHOWN IS ABSOLUTE FOR THE SAMPLE PROVIDED. [_ABSOLUTELUMENS]896.7 [_INPUT_ELECTRICAL]120.4 VOLTS, 14.3 WATTS, 0.120 AMPS [_SCALED_TEST] SCALED FROM ABSOLUTE TEST: ISF 33177S AND BASED ON NOMINAL SYSTEM PERFORMANCE. [_TEMP0] AMBIENT: 25.
PAGE 6
WF6 SQ 6" LED Wafer Module ENERGY DATA & DIMMING CAPABILITY 6" SQUARE ENERGY DATA Lumens Color Temperature 860 880 900 920 980 2700K 3000K 3500K 4000K 5000K CRI 80 80 80 80 80 Lu/Watts 61.9 65.6 68.2 66.1 70 14W Min. starting temp -40°C (-40°F) EMI/RFI FCC Title 47 CFR, Part 15, Class B Sound rating Class A Standards Input voltage 120V Min. power factor 0.99 Input frequency 50/60HZ Rated wattage 13.9W 13.4W 13.2W 13.9W Input power 13.9W 13.4W 13.2W 13.
PAGE 7
WF6 SQ 6" LED Wafer Module LIGHTING FACTS WF6 SQ DOWNLIGHTING: One Lithonia Way, Conyers, GA 30012 Phone: 800-315-4935 Fax: 770-860-3129 www.lithonia.com © 2017 Acuity Brands Lighting, Inc. All rights reserved. Rev.
PAGE 8
WF6 SQ 6" LED Wafer Module LIGHTING FACTS WF6 SQ DOWNLIGHTING: One Lithonia Way, Conyers, GA 30012 Phone: 800-315-4935 Fax: 770-860-3129 www.lithonia.com © 2017 Acuity Brands Lighting, Inc. All rights reserved. Rev.