FAQ

What type of dimming does the WSX D and
SPODMRD perform?
The dimming in the WSX D and the SPODMRD is 0-10V sink.
LED technology readily supports this type of dimming.
Energy compliance is very important, how does the
WSX D aid in energy compliance?
Energy codes require occupancy sensing and multi-level
lighting control in small spaces. The WSX D addresses these
energy code requirements for dimming, occupancy sensing
and daylight harvesting in one cost-effective package.
What features does the WSX D offer that are different
from its competitors?
The WSX D offers two great features that enable it to stand out
from the competition. The first is a Dual Technology option
which means it has Passive Infrared AND Microphonics™. The
WSX D is the only 0-10V Dimming Wall Switch Occupancy
Sensor with Automatic Dimming Control.
Can a wall switch photosensor reliably perform closed
loop dimming?
Yes, we have developed Adaptive Daylight Harvesting (ADH)
technology which accounts for interruptions in photocell
readings through firmware algorithms enhancing reliability of
the photosensor.
What is the advantage of the eldoLED driver
compatibility (EZ) option?
eldoLED drivers are included in many of the Acuity Brands LED
fixtures and in order to fully utilize the power of the eldoLED
driver, we have developed the EZ option for the
WSX D. The EZ option enables the WSX D and SPODMRD
to speak the same language as the eldoLED driver providing
advanced dimming controls; dim to dark! This is a great
example of the interoperability of the Acuity Brands products.
Are custom trim levels (high and/or low) available?
Yes, we do offer custom trim levels. The settings for the trim
levels for the WSX D and SPODMRD can be changed through
the push-button programming. Additionally, the trim level
settings can be set at the factory for a nominal programming
fee and minimum order quantity (30 units).
Is the WSX D and SPODMRD available in colors other
than White?
Yes, there are a total of six color options available; White, Light
Almond, Ivory, Gray, Black and Red. There is an additional fee
for Gray, Black and Red colors.
Does the WSX D and/or SPODMRD offer three-way switching?
We are continuously working on adding features and
functionality but at this time the WSX D and SPODMRD do not
support three-way switching.
Will there be a USPOM version?
Yes, Acuity Controls supports US Manufacture products for
the WSX D and SPODMRD product lines. There will be
limited models and colors available. Please check the
website for details.
WSX D / SPODMRD
FAQs
One Lithonia Way | Conyers, Georgia 30012 | Phone: [phone] | www.acuitycontrols.com
©2015 Acuity Brands Lighting, Inc. All rights reserved. | 12/15 | SSI_2548
WSX D SPODMRD