Specification

ORDERING INFORMATION
LED Vapor Tight
XVML
FEATURES & SPECIFICATIONS
INTENDED USE — Ideal for damp/wet locations such as outdoor venues, canopies and locker rooms.
Certain airborne contaminants can diminish the integrity of acrylic and/or polycarbonate.
Click here for Acrylic and Polycarbonate Environmental Compatibility table for suitable uses.
CONSTRUCTION — Light gray, fully gasketed, polycarbonate housing with ten polycarbonate captive
latches provides a watertight seal. The high-impact resistant housing and extruded silicone rubber
gasket protects the internal components from the environment, including moisture and dirt. 3/8" wet
location fitting provided on the 3500LM fixture and 1/2" wet location fitting provided on the 5000LM
fixture on one end for use with liquid tight conduit. The housing dimensions vary based on the lumen
package selected. See DIMENSIONS drawings on page 2 for details. Polycarbonate latches (included)
deter tampering, by accommodating #6-32x3/8" tamper resistant fasteners (not provided). Grade 301
stainless steel latches (available separately) deter tampering, by accommodating #8-32x1/2" tamper
resistant fasteners (not provided).
OPTICS — UV-stabilized, high-impact, frosted polycarbonate lens for uniform light output and high-
impact resistance.
ELECTRICAL — High-efficiency LEDs. 0-10V dimming standard for a dimming range of 100% to 10%.
3kV Ring, 2kV Combo level of surge protection is standard.
INSTALLATION — Mounting hardware for surface mounting to ceiling or wall (horizontally or verti-
cally) included. Mounting hardware kit also includes hooks for suspended mount (chain not included).
Optional 45° corner angle bracket mount and junction mount kit also available. Maximum of 15 units
or 6A for through wiring connection or daisy chain type installation. Tool-less access for installation.
LISTINGS — UL/C-UL listed to US and Canadian Safety Standards. For use in wet locations under covered
ceilings. For use in ambient temperatures from -40°F (-40°C) to 104°F (40°C). IP65 and IP66 rated when
ceiling, suspended, wall or corner mounted. Junction Box mount rated IP65. This unit meets FCC Non-
Consumer Class A (277v) and Consumer Class B (120V) limits.
DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified.
Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions
are qualified.
WARRANTY — 5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
Catalog number Lumens Voltage Color temperature Standard carton quantity
XVML L48 3500LM MVOLT 40K 80CRI 3500LM MVOLT (120-277) 4000K, 80CRI 1
XVML L48 3500LM MVOLT 50K 80CRI 3500LM MVOLT (120-277) 5000K, 80CRI 1
XVML L48 5000LM MVOLT 40K 80CRI 5000LM MVOLT (120-277) 4000K, 80CRI 1
XVML L48 5000LM MVOLT 50K 80CRI 5000LM MVOLT (120-277) 5000K, 80CRI 1
INDUSTRIAL XVML
Catalog
Number
Notes
Type
Accessories: Order as separate catalog number.
XVML LATCH STSL Stainless steel latch kit (Set of 10)
1
XVMLJSB Junction box mount
2
XVMLANGBKT45 Angle mount bracket
3
Notes
1 To deter tampering, stainless steel latches can accommodate #8-32x1/2"
tamper resistant fasteners (not provided). Kit includes 10 latches.
2 IP65 rated. Not compatible with angle mount bracket. Required to be
used in center of fixture with supplied brackets for additional mounting
support.
3 For use with applications where ceiling meets wall at a 90° angle. See
drawing on page 3 for more information.