Cut Sheet

ManualsBrandsLithonia Lighting ManualsOther4 ft. 2-Light T8 Contractor Gasketed Fluorescent Fixture

CONTRACTOR SELECT / FLUORESCENT INDUSTRIAL_WET_LOCATION

Catalog

Number

Notes

Type

ORDERING INFORMATION

Contractor Select

Industrial

Wet Location

Notes

1 CSA products come standard with probe-start ballasts.

XWL

FEATURES & SPECIFICATIONS

INTENDED USE

Designed for low to medium mounting heights. Ideal for applications where dirt, dust, humidity, moisture

and cold temperatures are present. Certain airborne contaminants can diminish integrity of acrylic.

Click here for Acrylic Environmental Compatibility table for suitable uses.

CONSTRUCTION

Rugged light gray polycarbonate housing with continuous poured gasket for an airtight seal, keeping out

moisture, dust and humidity. Cold-rolled steel enclosed wireway included.

Provided with one open hole and knockout at opposite end.

OPTICS

UV stablized, impact-resistant, polycarbonate lens. Ten (10) snap-t polycarbonate latches attach the lens

to the housing for a tight seal.

ELECTRICAL SYSTEM

Standard electronic ballast (120-277V, 60Hz) ensures no ickering and quiet operation.

Starts instantly down to 0°F (-18°C) with two 32W linear T8 lamps and with two 54W linear T5HO lamps

(lamps not included).

INSTALLATION

Two stainless steel mounting brackets included, which allow for ush or chain mounting (chain not included).

LISTINGS

UL listed to US and Canadian safety standards. UL listed for 25°C ambient and wet locations. IP65 rated.

WARRANTY

Fixtures, including ballasts, are covered by the Lithonia Lighting 24-month warranty against mechanical

defects in manufacture.

Standard

Catalog # of Lamp Pallet Carton

Number UPC Description Lamps Wattage Voltage Included Qty. Qty.

XWL232 MV 745975639755 Enclosed industrial 2 32 120-277 N 63 1

XWL254 MV 745976008697 Enclosed industrial 2 54 120-277 N 63 1

5-3/4

(14.6)

(10.2)

Accessories: Order as separate catalog number.

DXWL48 Enclosed industrial replacement lens.

XWL LATCH M10 Enclosed industrial replacement latch.

Summary of content (2 pages)

PAGE 1
Catalog Number Notes FEATURES & SPECIFICATIONS Intended Use Type Designed for low to medium mounting heights. Ideal for applications where dirt, dust, humidity, moisture and cold temperatures are present. Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses.
PAGE 2
Industrial Wet Location TEST NO: LTL16355 LUMINAIRE CATALOG NO.:XWL 2 32 LUMENS PER LAMP:2850 Coefficients of Utilization 20% 80% 70% 50% 30% 10% 50% 30% 10% 67 63 60 69 65 62 57 52 47 59 53 48 49 43 38 51 44 39 43 37 32 45 38 32 38 32 27 40 33 27 24 18 14 24 19 15 Zonal Lumen Summary Zone Lumens % Lamp % Fixture 0° - 30° 754.0 13.2 18.5 0° - 40° 1258.5 22.1 30.8 0° - 60° 2366.6 41.5 58.0 0° - 90° 3711.0 65.1 90.9 90° - 180° 372.4 6.5 9.1 0° - 180° 4083.4 71.6 100.