Technical Specifications

ManualsBrandsLithonia ManualsIndoor LightingLighting® 6" Integrated LED Wafer Downlight

Wafer LED Recessed Downlight

WF6

6" LED Switchable White

Color Temperature

IC/Non-IC

New Construction/Remodel

FEATURES & SPECIFICATIONS

INTENDED USE — The 6" Wafer™ LED Downlight with Switchable White provides high-quality light output

and eﬃciency featuring a switch for easy color temperature adjustment - while eliminating the need

for recessed housings. The innovative, slim design allows for easy retroﬁt, remodel or new construction

installation from below the ceiling. The Wafer LED downlight is wet location listed – making it ideal for use

in a breadth of outdoor residential, hospitality, commercial and multifamily applications.

CONSTRUCTION — Aluminum die cast outer frame. Durable, powder coat paint to prevent rust. FT4 plenum

rated cable connector to connect from module to remote driver box. IC rated driver with convenience and

value of two remote selectable color temperature options, each with a setting choice to chose either 2700K,

3000K, and 3500K or 3000K, 4000K, and 5000K using the switch. The isolated driver integrated inside steel

remote box with four 7/8" knockouts with slots for pryout. Suitable for pulling wires with the 12 cubic-inch

wiring compartment to accommodate up to (6) 14 gauge insulated conductors; making the Wafer LED

Downlights much easier to wire in 2in/2out (plus ground) daisy-chain applications and contractor friendly.

PATENT PENDING.

INSTALLATION — Ideal for shallow ceiling plenum; no housing required. Steel spring clip for easy

installation. 6" cut out template is provided to ensure a correct sized hole is cut into ceiling for proper

installation of the trim. Size of hole should not exceed 6 1/4 inches for this product. Suitable for installation

in t-grid and drop ceiling applications. 2" plenum space required for installation of the remote driver box.

OPTICS — Edge-lit LED technology uses light guided plate to distribute light. Polycarbonate lens provides

even illumination throughout the space.

ELECTRICAL — Connect directly to 120V power supply via provided UL recognized driver. High eﬃcient

driver with power factor > 0.9. Ambient operating temperature: -40°F (-40°C) to +104°F (+40°C). Dimming

down to 10% with most standard incandescent dimers (see list of approved dimmers). Replaces 75W

incandescent for 1150L lumens and 100W incandescent for lumens.

LISTINGS — CSA certiﬁed to US and Canadian safety standards. ENERGY STAR® certiﬁed product. Wet

location. Air Tight certiﬁed in accordance with ASTM E283-2004. NOM Certiﬁed. Can be used to comply

with California Title 24 Part 6 High Eﬃcacy LED light Source Requirements.

WARRANTY — 5-year limited warranty. Complete warranty terms located at:

www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

Note: Actual performance may diﬀer as a result of end-user environment and application.

All values are design or typical values, measured under laboratory conditions at 25 °C.

Speciﬁcations subject to change without notice.

DOWNLIGHTING WF6 LED - Switchable White

Catalog

Number

Notes

Type

Matte black Brushed nickel Oil-rubbed bronze

Speciﬁcations

Aperture: 4.9 (12.4)

Ceiling opening: 6 (15.2)

Overlap trim: 6.7 (17)

Height: 1.1 (2.8)

All dimensions are inches (centimeters) unless otherwise indicated.

4.9"

(12.4)

5.9"

(12.4)

6.7"

(17.0)

1.1"

(2.8)

WF6

Series Lamp CCT/W/Lumens

CRI Finish

WF6 6" wafer-thin LED downlight LL Low Lumen

LED LED

27K30K35K 2700K/10W/830L

3000K/10W/900L

3500K/10W/860L

30K40K50K 3000K/10W/850L

4000K/10W/920L

5000K/10W/880L

27K30K35K 2700K/14W/1040L

3000K/14W/1150L

3500K/14W/1110L

30K40K50K 3000K/14W/1090L

4000K/14W/1190L

5000K/14W/1120L

90CRI 90CRI MW Matte White

MB Matte Black

BN Brush Nickel

ORB Oil-Rubbed Bronze

ORDERING INFORMATION

For shortest lead times, conﬁgure product using standard options (shown in bold).

Example: WF4 LED 30K40K50K 90CRI MW

Notes

1 Total system delivered

lumens.

WF8643 Universal

New Construction Pan

Remodel Joist Bar

Accessories: Order as separate catalog number.

WF8643 Pan U Universal new construction pan

WFJB U Remodel joist bar

WFEXC6 SW3PIN FT4 3-Pin 6ft Cable

WFEXC10 SW3PIN FT4 3-Pin 10ft Cable

WFEXC20 SW3PIN FT4 3-Pin 20ft Cable

WFEXC6 Cable

Summary of content (7 pages)

PAGE 1
Catalog Number Notes FEATURES & SPECIFICATIONS Type INTENDED USE — The 6" Wafer™ LED Downlight with Switchable White provides high-quality light output and efficiency featuring a switch for easy color temperature adjustment - while eliminating the need for recessed housings. The innovative, slim design allows for easy retrofit, remodel or new construction installation from below the ceiling.
PAGE 2
[_FAMILY] WF6 Downlight [_PRODUCTID] 0c0a10e2-52eb-434f-952a-ed672923967e [_MOUNTING] RECESSED DOWNLIGHT [_TOTALLUMINAIRELUMENS] 1074 [_INPUTWATTAGE] 14.14 [_PHYSICALDIMENSIONS] -0.27, -0.27, 0 [_SCALED_TEST] SCALED FROM ABSOLUTE TEST: ISF 36824S R27K AND BASED ON NOMINAL SYSTEM PERFORMANCE. WF6 Switchable White 6" LED Wafer Module PHOTOMETRICS Distribution Curve Distribution Data Output Data Coefficient of Utilization Spacing to Mounting Height: 1.
PAGE 3
[_FAMILY] WF6 Downlight [_PRODUCTID] 230ecc82-a2ff-4e5f-8bfd-0340b425bbbe [_MOUNTING] RECESSED DOWNLIGHT [_TOTALLUMINAIRELUMENS] 1099 [_INPUTWATTAGE] 13.83 [_PHYSICALDIMENSIONS] -0.27, -0.27, 0 [_SCALED_TEST] SCALED FROM ABSOLUTE TEST: ISF 36821S AND BASED ON NOMINAL SYSTEM PERFORMANCE. WF6 Switchable White 6" LED Wafer Module PHOTOMETRICS Distribution Curve Distribution Data Output Data Coefficient of Utilization Spacing to Mounting Height: 1.
PAGE 4
[_FAMILY] WF6 Downlight [_PRODUCTID] 3041d3b8-888f-4163-a6aa-21a8b543b927 [_MOUNTING] RECESSED DOWNLIGHT [_TOTALLUMINAIRELUMENS] 839.3 [_INPUTWATTAGE] 10.04 [_PHYSICALDIMENSIONS] -0.27, -0.27, 0 [_SCALED_TEST] SCALED FROM ABSOLUTE TEST: ISF 36823S AND BASED ON NOMINAL SYSTEM PERFORMANCE. WF6 Switchable White 6" LED Wafer Module PHOTOMETRICS Distribution Curve Distribution Data Output Data Coefficient of Utilization Spacing to Mounting Height: 1.
PAGE 5
[_FAMILY] WF6 Downlight [_PRODUCTID] 04f7211a-78d0-4c3f-9aff-64385bbfbccf [_MOUNTING] RECESSED DOWNLIGHT [_TOTALLUMINAIRELUMENS] 855.1 [_INPUTWATTAGE] 9.93 [_PHYSICALDIMENSIONS] -0.27, -0.27, 0 [_SCALED_TEST] SCALED FROM ABSOLUTE TEST: ISF 36822S AND BASED ON NOMINAL SYSTEM PERFORMANCE. WF6 Switchable White 6" LED Wafer Module PHOTOMETRICS Distribution Curve Distribution Data Output Data Coefficient of Utilization Spacing to Mounting Height: 1.
PAGE 6
WF6 Switchable White 6" LED Wafer Module ENERGY DATA Color Temperature Lumens CRI Rated wattage Lu/Watts Min. starting temp EMI/RFI Sound rating Input voltage Min. power factor Input frequency Input power Input current WF6 LED 27K30K35K 2700K 3000K 1070 1150 90 90 14.1 13.4 75.9 85.8 -40°C (-40°F) -40°C (-40°F) FCC Title 47 CFR, Part 15, Class B FCC Title 47 CFR, Part 15, Class B Class A Standards Class A Standards 120V 120V 0.98 0.98 50/60 Hz 50/60 Hz 120V 120V 0.12A 0.12A 3500K 1110 90 13.9 79.
PAGE 7
WF6 Switchable White 6" LED Wafer Module Altura del techo Ceiling Height 244 cm 8 ft. 244 cm 8 ft. 609 731 853 609 853 ft . 28 ft. 24 ft. 20 Light Spread Diffusion de la lumière Difusión de la luz cm 10 ft. cm 305 cm cm 10 ft. cm 305 cm cm 12 ft. cm 366 cm ft . 28 ft. 24 ft. 20 LOW LUMEN Altura del techo 12 ft.