TDS

4
Products to grout and clean
www.litokol.it
APPLICATION DATA
Time before grouting
Floor tile installation
● with normal-setting adhesive: 24 hours
● with fast-setting adhesive: 4 hours
● with mortar: 7-10 days
Wall tile installation
● with normal-setting adhesive: 6-8 hours
● with fast-setting adhesive: 4 hours
● with mortar: 2-3 days
Mixing ratios
PART A: 100 parts by weight
PART B: 8 parts by weight
The two parts are pre-batched in their
respective containers
Mix consistency
Creamy
Specific gravity of mix
1,55 kg/l
Pot life
About 1 hour at T=+23°C
Permitted application
temperatures
From +12°C to +30°C
Recommended application
temperatures
From +18°C to +23°C
Walk on time
24 hours at T=+23°C
Ready for use
5 days at T=+23°C
Joint width
From 1 to 15 mm
PERFORMANCE
Shear adhesion strength
(EN 12003)
Initial ≥ 2 N/mm
2
After immersion in water ≥ 2 N/mm
2
After thermal shock ≥ 2 N/mm
2
Abrasion resistance
(EN 12808-2)
≤ 250 mm
3
Mechanical flexural
strength after 28 days in
standard conditions (EN
12808-3)
≥ 30 N/mm
2
Mechanical compressive
strength after 28 days in
standard conditions
(EN 12808-3)
≥ 45 N/mm
2
Shrinkage (EN 12808-4)
≤ 1,5 mm/m
Water absorption after
4 hours (EN 12808-5)
≤ 0,1 g
Temperature of use
From – 20°C to +100°C