Cut Sheet

ManualsBrandsLittelfuse ManualsCoversFuse Holder In Line Waterproof, Mini

31 Littelfuse Aftermarket Products Catalog

Bolt-Down Fuse Blocks

Fuse Blocks & Holders

Flex-MEGA

Fuse Block

For use with MEGA bolt-down fuses, up to 500A. The Flex holder offers a flexible cover, which allows cable

entry from virtually any direction, large wire size, and ring terminal stack up. Busbars are available for multiple

holder applications and a dovetail feature allows interlocking of multiple Flex-MIDI and Flex-MEGA fuse holders

together for a power distribution block. Fuse not included. Additional information at: littelfuse.com/FLEX-MEGA

MEGA

Bolt-Down Fuse Block

Use with MEGA fuses up to 500A. Ideal for battery and alternator connections and other heavy gauge

cables requiring ultra high current protection. Includes protective cover. Features interconnecting pins on

side of fuse block for multiple block configurations. Includes M8 threaded studs and hex nuts with lock

washers. Fuse not included. Additional information: littelfuse.com/298

MEGA

SN Series Assure-Latch™ Fuse Block

The SN Series is a high amperage in-line MEGA fuse block with sealed positive latching technology. The

fuse holder base and cover are secured together with AssureLatch™ technology to form a water resistant

and ignition protected assembly. Fuse not included. Additional information: littelfuse.com/SN

MIDI

SN Series Assure-Latch™ Fuse Block

The SN Series is a high amperage in-line MEGA fuse block with sealed positive latching technology. The

fuse holder base and cover are secured together with AssureLatch™ technology to form a water resistant

and ignition protected assembly. Fuse not included. Additional information: littelfuse.com/SN

Flex-MIDI

Fuse Block

For use with MIDI bolt-down fuses, up to 200A. The Flex holder offers a flexible cover, which allows cable

entry from virtually any direction, large wire size, and ring terminal stack up. Busbars are available for multiple

holder applications and a dovetail feature allows interlocking of multiple Flex-MIDI and Flex-MEGA fuse holders

together for a power distribution block. Fuse not included. Additional information: littelfuse.com/FLEX-MIDI

PART NUMBERS VOLTAGE AMPERAGE HARDWARE MATERIAL STUD TORQUE NOTES

04981038HXFC 32V DC 200A Zinc-Plated Steel 3.0-5.0 Nm –

04982001ZXFC 32V DC 200A Zinc-Plated Steel 3.0-5.0 Nm 2 Holders with Busbar

BUSBAR PART NUMBERS

DESCRIPTION HARDWARE MATERIAL – NOTES

882-267-002 2 Position Bus Bar Tin-Plated Copper – For use 2 Fuse Holders

882-267-003 3 Position Bus Bar Tin-Plated Copper – For use 3 Fuse Holders

882-267-004 4 Position Bus Bar Tin-Plated Copper – For use 4 Fuse Holders

882-267-005 5 Position Bus Bar Tin-Plated Copper – For use 5 Fuse Holders

PART NUMBERS VOLTAGE AMPERAGE HARDWARE MATERIAL STUD TORQUE NOTES

02981028HXFC-SS 32V DC 500A Stainless Steel 12-18 Nm –

02981028HXFC 32V DC 500A Zinc-Plated Steel 12-18 Nm –

BUSBAR PART NUMBERS

DESCRIPTION HARDWARE MATERIAL – NOTES

882-839-2 2 Position Bus Bar Tin-Plated Copper – For use 2 Fuse Holders

882-839-3 3 Position Bus Bar Tin-Plated Copper – For use 3 Fuse Holders

882-839-4 4 Position Bus Bar Tin-Plated Copper – For use 4 Fuse Holders

882-839-5 5 Position Bus Bar Tin-Plated Copper – For use 5 Fuse Holders

PART NUMBERS

VOLTAGE AMPERAGE INGRESS

HARDWARE

MATERIAL

STUD

TORQUE

NOTES

BULK BOXED

880014 880014S 32V DC 500A IP66 & IP69K Tin-Plated Steel 20 Nm

Ignition

Protected

PART NUMBERS

VOLTAGE AMPERAGE INGRESS

HARDWARE

MATERIAL

STUD

TORQUE

NOTES

BULK BOXED

880015 880015S 32V DC 200A IP66 & IP69K Tin-Plated Steel 20 Nm

Ignition

Protected

PART NUMBERS

VOLTAGE AMPERAGE

HARDWARE

MATERIAL

STUD TORQUE

BULK 70-PC BULK 20-PC BULK 10-PC

02980900Z 02980900S 02980900TXN 32V DC 500A Zinc-Plated Steel 12-18 Nm

Summary of content (4 pages)

PAGE 1
Fuse Blocks & Holders Bolt-Down Fuse Blocks MEGA® Bolt-Down Fuse Block Use with MEGA fuses up to 500A. Ideal for battery and alternator connections and other heavy gauge cables requiring ultra high current protection. Includes protective cover. Features interconnecting pins on side of fuse block for multiple block configurations. Includes M8 threaded studs and hex nuts with lock washers. Fuse not included. Additional information: littelfuse.
PAGE 2
In-Line Fuse Holders MIDI® Compact In-line Fuse Holder Designed for use with bolt-down MIDI style fuses. It can be conveniently installed directly in-line with the cables and no mounting required. The fuse holder is easy to shrinkwrap for environmental protection and the corners of the cover are curved so that shrinkwrap will not be split. Download additional technical information at: littelfuse.
PAGE 3
Fuse Blocks & Holders In-Line Blade Fuse Holders MINI® In-line Blade Fuse Holders with Covers - FHM Series Use with MINI 2 to 20A fuses. Supplied with two 4" wire leads of 14 gauge black wire. Includes protective cover for harsh environment. Heavy Duty MINI® In-line Blade Fuse Holders with Covers - FHM Series Use with MINI 25 and 30A fuses. Supplied with two 4" wire leads of 12 gauge orange wire. Includes protective cover for harsh environment. Download additional technical information at: littelfuse.
PAGE 4
JCASE & Glass Fuse Holders JCASE ® In-Line Cartridge Fuse Holders - FHJC & FHJ Series In-line fuse holders for JCASE fuses available with brackets covers or wire sizes 10AWG (up to 40A) or 8AWG (up to 60A). Additional information: littelfuse.