Datasheet

littelfuse.com© 2016 Littelfuse Revised: 05/11/16
Specifications are subject to change without notice.
59085 Vane Sensor
Description
The 59085 is a reed vane sensor with integral actuator magnet. It’s actuation
occurs when a suitable low carbon steel vane passes through the slot between
the magnet and switch. It is normally open, normally closed, high voltage
normally closed or changeover contacts. It is capable of switching up to
265Vac/300Vdc at 10VA. It is ideally suited to position and limit sensing,
security, linear actuator, industrial process control and shaft rotation
applications.
Agency Approvals
Agency Agency File Number
E61760
Reed Sensors
Features
• Sensor and magnet contained in
single housing
• Sensor operates when ferrous vane
passes through slot
• Choice of cable length and
connector
Benefits
• Hermetically sealed, magnetically
operated contacts continue to
operate long after optical and other
technologies fail due to
contamination
• Quick and reliable single screw
mounting with location feature
• No standby power requirement
Applications
• Position and limit sensing
• Security system switch
• Linear actuators
• Industrial process control
• Shaft rotation sensing
Dimensions
Dimensions in mm (inch)
Vane Sensor > 59085
Note: Contact Littelfuse for specific agency approval ratings.
1.91
(.075)
4.91
(.165)
6.35
(.250)
6.35
(.250)
25.4
(1.00)
3.81
(.150)
6.69
(.342)
1.50
(.062)
6.35
(.25) NOM.
10.00
Cable Options±(.393)
19.05
(.750)
.1
16 DRILL C SINK FOR
#4-40 MAGNETIC
1.59
(.062)