Guide

Carbon Filter and Seal Installation Instructions
To Install: Tuck the top corner
under the lip of the drawer (left).
Then slide the filter upward.
The carbon filter, when
installed, should look like the
picture to the right
Carbon Filter:
picture
to
the
right
.
To Remove
: Grab the bottom
corner of the filter and pull the
filter down, away from the
drawer step.
Base Seal Installation for
base with Rib: Peel back
the protective strip and
Base Seal:
place the base seal strip
above the rib (left). Then,
press down firmly on the
base strip. The base seal
strip should look like the
picture to the right when
installation is complete.
rib
¼”
Base Seal Installation for
base without Rib: Cut out
the template on the reverse
side of this sheet and place
it on the base as shown
(left). Make frequent marks
around the base. Peel back
the protective strip and
place the base strip above
the line you have created
(right). Lastly, press down
firmly on the seal strip
firmly
on
the
seal
strip
.
Available Kits for Re-Order:
K-CF/S: 3 Carbon Filters and 2 Base Seal Strips
K-CF: 3 Carbon Filters
K-SS: 2 Base Seal Strips
Automated Pet Care Products Inc.
Updated 04302008