Owner's manual

Children's Furniture Made In America
Established 1987
www.littlecolorado.com
®
Inc.
Revised 8/09
All of us at Little Colorado, Inc. hope that you and your little ones will enjoy this Activity Table for many
years. Check out our other great products by visiting www.littlecolorado.com
Little Colorado, Inc. 4450 Lipan Street Denver, Colorado 80211
Phone [phone] Fax [phone] Email [e-mail]
If you have any problems in assembly, please contact us and we will help you. This product is nished
with an environmentally friendly waterbased acrylic. It is totally non toxic and is made in America.
There may be an odor when taken out of the box. It will dissipate more rapidly with warmer temperature
and air movement. The wood and plastic surfaces may be cleaned with any non-abrasive cleaner that
does not contain ammonia.
Assembly Instructions For Stock #76(small) and #77(large) Activity Tables
Contents: 2- Leg Assemblies
1- Table Top with one two bags
8- Joint Connector Bolts
8- Barrel Nuts
1- Allen Wrench
1. Please inspect the parts for damage during shipping and for any missing items. If you suspect that
there may be damage or a shortage, contact us and we will send replacement parts if needed. At this
time, visualize how the components t together and make sure that you have everything indentifed.
2. This product is easiest assembled upside down. Choose a leg assembly and place it into posi-
tion. The small table legs are interchangeable. The large table legs must have the wooden cleat to the
inside. Insert two of the barrel nuts into the 1/2" holes in the side. Put the smooth end in rst so that
the slotted end is showing and align the longest slot the direction the bolt will go. If necessary, rotate
the barrel nuts with a screwdriver so that they line up perfectly. Insert the bolt through the leg and screw
it into the barrel nut using the allen wrench. Tighten until snug then loosen one full turn. Repeat this
procedure for the other three holes in the leg. Now attach the other end leg assembly the same way.
3. Take the loosely assembled table and place it right side up on a hard at oor. Push gently on the
top so that all four legs are making contact with the oor and the top is level. Now tighten all 8 bolts and
you are nished. Save the wrench in case the legs need retightening in the future.
WARNING: Adult Assembly Required
WARNING: Assembly Kit Contains Parts With Sharp Points, Sharp Edges,
and Small Parts That Can Present Choking Hazards to Children,
WARNING: Components Are Packed In Plastic Bags That Are A Suffocation Hazard.