Instruction Manual

Bench Toy Box Hardware

Quality Wooden Children’s Furniture and Accessories

Made in America • Established 1987

www.littlecolorado.com

Bench Toy Box Assembly Instructions; Stock # 17

• Please inspect the parts for damage during shipping and for any missing items. If you suspect that there may be damage or a shortage, contact us

and we will send replacement parts if needed.

• As soon as components and hardware are unpacked; please remove and recycle all plastic bags from possible contact with children.

• Words in Red represent a component or hardware used in assembly.

• Illustrations are intended to help identify components and hardware and are not drawn to scale.

Revised 09/09

W.McClung

Please read instructions carefully

to avoid accidental damage to

components during assembly.

12- Cam Locks

12- Cam Posts

Bench Toy Box Components

Page 1 of 3

Bottom

Tools needed for assembly

• Medium size #2 Phillips

Screwdriver

ADULT ASSEMBLY REQUIRED

WARNING: Assembly kit contains parts with sharp points.

WARNING: Assembly kit contains parts with sharp edges.

WARNING: Package contains plastic bags that present suffocation risks for children.

WARNING: Assembly kit contains small parts that present choking hazards for children.

4- #5 5/8 in.

Wood Screws

Lid

Front

Back

SideSide

Back Rest

1- Lid Support

Top Bottom

4- #8 1 5/8 in.

Wood Screws

4 Wooden Plugs

PAGE 1
Page 1 of 3 Please read instructions carefully to avoid accidental damage to components during assembly. Revised 09/09 by W.McClung Quality Wooden Children’s Furniture and Accessories Made in America • Established 1987 www.littlecolorado.com ADULT ASSEMBLY REQUIRED WARNING: Assembly kit contains parts with sharp points. WARNING: Assembly kit contains parts with sharp edges. WARNING: Package contains plastic bags that present suffocation risks for children.
PAGE 2
Page 2 of 3 Revised 09/09 by W.McClung Quality Wooden Children’s Furniture and Accessories Made in America • Established 1987 www.littlecolorado.com Bench Toy Box Assembly Instructions- Continued • Be careful not to over tighten screws. 1 • Use a #2 Phillips head screwdriver to screw in 4 Cam Posts to each side of Back. • Each cam post must be fully seated and perpendicular. • While lid and back are laying flat on floor, install lid support using the 4 #5 x 5/8in.
PAGE 3
Page 3 of 3 Revised 09/09 by W.McClung Please Recycle Instructions Quality Wooden Children’s Furniture and Accessories Made in America • Established 1987 www.littlecolorado.com Bench Toy Box Assembly Instructions- Continued 7 • Now use the tapered Plugs to fill in the exterior screw holes located on the outside face of the Arm Rests. The finished face of the Plug should be showing.