Use and Care Manual

Construction Manual
© 2007 Little Cottage Co.
Page 9
Gambrel Barn Units - 8x8 through 12x24
47
Install dripedge along sides of roof using 1¼” screws
every 1’.
48
Then, install dripedge along the ends of structure
using 1¼” screws, beginning at the front corner.
49
Continue to attach dripedge using 1¼” screws to the
rst bend.
50
Snip the dripedge as shown to accommodate bend.
52
Once at the ridge of roof, again snip the dripedge to
accommodate bend.
51
Bend the dripedge along the edge of roof, securing
it to the roof with a 1¼” screw just after the bend.
Attach dripedge every 1.’
1” screw just
after bend
Gambrel Barn Units- 8x8 through 16x24
®