Use and Care Manual

Construction Manual
© 2007 Little Cottage Co.
Page 4
Gambrel Barn Units - 8x8 through 12x24
19
Hold the door in place (i.e., with door aligned to end
wall and oor) and mark around the barrel bolt as
shown.
22
Position outside latch in alignment with drill points.
Secure handle using two 2½” screws.
20
Drill hole using a 5/16” drill bit to accommodate the
barrel bolt. Slide bolt into hole and verify (when
closed) both doors are aligned with end wall.
23
Align and tighten inside latch using the hex head
wrench.
21
Next, locate the door latch as shown above.
24
Align ridge vents around vent cutouts and secure
using 1” screws.
Gambrel Barn Units- 8x8 through 16x24
®