Use and Care Manual

ManualsBrandsLittle Giant Ladder Systems ManualsKitchenSuper Duty 11 ft. Aluminum Multi-Position Ladder with 375 lb. Load Capacity Type IAA Duty Rating

Thank you for purchasing the Little Giant

Super Duty ladder – the original Multi-Use ladder. When used

correctly, the Little Giant Super Duty is the strongest, safest, most versatile ladder in the world. Little Giant

Ladder Systems subjects each ladder to comprehensive tests for safety in design and construction, so you

can trust it in all the work you do.

Please do not ignore the instructions! Make the most of your ladder system by learning how to use it safety.

If you have any questions about how to operate your ladder system, please contact us. We value our

customers, and we’re happy to help.

The Little Giant Super Duty is a Multi-Use ladder

system made up of three major components: one

inner ladder assembly and two outer ladder assem-

blies that telescope over the inner section. The inner

and outer assemblies work together with the hinge

locks and Lock Tabs to adjust the ladder into different

lengths and positions, including:

1. Extension

2. A-Frame stepladder

3. Trestle-and-plank scaffolding system

4. 90-degree (only used against a secure wall)

5. Staircase

Customer Service: 800-453-1192

Little Giant Ladder Systems

1198 N. Spring Creek Place • Springville, UT 84663

SCAN THE CODE TO VIEW

INSTRUCTION & SAFETY VIDEO

1 2 3 4 5

Hinge Locks

(Palm Buttons)

Inner Ladder

Assembly

Outer Ladder

Assemblies

Lock Tabs

Super Duty

Summary of content (4 pages)

PAGE 1
SCAN THE CODE TO VIEW INSTRUCTION & SAFETY VIDEO Super Duty Thank you for purchasing the Little Giant® Super Duty ladder – the original Multi-Use ladder. When used correctly, the Little Giant Super Duty is the strongest, safest, most versatile ladder in the world. Little Giant Ladder Systems subjects each ladder to comprehensive tests for safety in design and construction, so you can trust it in all the work you do.
PAGE 2
1. Do not force the hinges in or out using any tools. You may cause permanent damage to the hinge mechanism. 2. If there is pressure on the hinge lock pins, they may not open properly. Relieve the pressure by moving one half of the ladder back and forth until the hinge locks move with minimal force. 3. Make sure each Lock Tab is fully engaged into the appropriate rung tube before climbing on the ladder. Failure to do so may result in injury. 4.
PAGE 3
Palm Button Change your ladder's shape. Push the Palm Buttons in to release the hinge locks. The Palm Buttons allow the ladder to change from storage, A-frame to extension. Lock Tabs Change your ladder's height. The Lock Tabs adjust the height of ladder. Pull out the Lock Tabs to unlock, replace the Lock Tabs in the desired rung tube. Unlock only one Lock Tab at a time while supporting the inner ladder assembly with one hand. Do not unlock the Lock Tab if anyone is on the ladder.
PAGE 4
A-Frame 90˚ Begin from the small A-frame position. Stand to one side of the ladder; unlock both Lock Tabs on one outer section. When extending the ladder your hands must always be on the outside of the outer section. Place one hand on the palm button and push away from you on the inner section to extend the height. Once you have reached the desired height; line up the inner ladder and the outer ladder rungs, place your hand under the rungs then lock both Lock Tabs.