User Manual

ManualsBrandsLittle Giant Ladder Systems ManualsKitchenRevolution 22 ft. Aluminum Multi-Position Ladder with 300 lb. Load Capacity Type IA Duty Rating

Thank you for purchasing the Little Giant Revolution™ — the next generation of the Little Giant Ladder

System. The RevolutionXE combines the versatility and safety of the original Little Giant Ladder System with

the latest features, including exclusive LiteWave™ technology, the new Quad-Lock™ hinge, and simple,

user-friendly Rock Locks™.

Please don’t ignore the instructions! Make the most of your ladder system by learning how to use it safely. If

you have any questions about how to operate your Revolution, please call us. We value our customers, and

we’re happy to help.

The Little Giant RevolutionXE is a multi-use ladder

system made up of three major components: one

inner ladder assembly and two outer ladder assem-

blies that telescope over the inner section. The inner

and outer assemblies work together with the Quad-

Lock hinge and the Rock Locks to adjust the ladder

into different lengths and positions, including:

1. Extension

2. A-Frame stepladder

3. Trestle-and-plank scaffolding system

4. 90-degree (only used against a secure wall)

5. Staircase

Customer Service: 800-453-1192

Little Giant Ladder Systems

1198 N. Spring Creek Place • Springville, UT 84663

1 2 3 4 5

Tip & Glide

wheels

Quad-Lock

SCAN THE CODE TO VIEW

INSTRUCTION & SAFETY VIDEO

Summary of content (4 pages)

PAGE 1
SCAN THE CODE TO VIEW INSTRUCTION & SAFETY VIDEO Thank you for purchasing the Little Giant Revolution™ — the next generation of the Little Giant Ladder System. The RevolutionXE combines the versatility and safety of the original Little Giant Ladder System with the latest features, including exclusive LiteWave™ technology, the new Quad-Lock™ hinge, and simple, user-friendly Rock Locks™. Please don’t ignore the instructions! Make the most of your ladder system by learning how to use it safely.
PAGE 2
1. Do not force the hinges in or out using any tools. You may cause permanent damage to the hinge mechanism. 2. If there is pressure on the hinge lock pins, they may not open properly. Relieve the pressure by moving one half of the ladder back and forth until the hinge locks move with minimal force. 3. Make sure each Rock Lock is fully engaged into the appropriate rung tube before climbing on the ladder. Failure to do so may result in injury. 4.
PAGE 3
Palm Button Change your ladder's shape. Push the Palm Buttons in to release the hinge locks. The Palm Buttons allow the ladder to change from storage, A-frame to extension. Rock Locks™ Change your ladder's height. The Rock Locks adjust the height of ladder. Push in on the bottom of the Rock Lock to open, tap the Rock Lock to close. Unlock only one Rock Lock at a time while supporting the inner ladder assembly with one hand. Do not unlock the Rock Lock if anyone is on the ladder.
PAGE 4
A-Frame 90˚ Begin from the small A-frame position. Stand to one side of the ladder; unlock both Rock Locks on one outer section. When extending the ladder your hands must always be on the outside of the outer section. Place one hand on the palm button and push the inner section away from you to extend the height. Once you have reached the desired height; line up the inner ladder and the outer ladder rungs, place your hand under the rungs then lock both Rock Locks.