Specification Sheet

Features
n Oil-filled aluminum housing
n Nylon volute & impeller
n Conduit fitting for mounting
n Submerged use only in parts washers
n Triple-lip Viton
®
shaft seal
n For use with UL (PJQU) solvents
n 205 GPH @ 1'
n 6' cord, no plug
n Thermally protected
Construction
n Motor 1/150 HP
n Intake Screened
n Discharge 1/4" MNPT
n Housing Aluminum
n Cover Aluminum
n Volute Nylon
n Impeller Nylon
n Shaft Seal Viton
®
n Screen Polyethylene
Specialty Pumps
1-YS Series
Oil-filled cast aluminum submersible pump for use with stoddard solvent and deodorized kerosene submerged parts
washer applications only. Sealed unit has double-lip Viton
®
seal and nylon volute with 1/4" MNPT discharge.
6' power cord without plug has “Master Builders” conduit fitting at pump housing for mounting. For pumping unheated
metal parts cleaning solvent which is UL classified as PJQU, as described in the Gas and Oil Equipment Directory.
These refined petroleum distillates are free from tendency to heat spontaneously; they have a closed cup flash point
not lower than 100°F. Thermally protected.

Summary of content (2 pages)