Specification Sheet

Little

Pump Company

GIANT

Features

Oil-filled Aluminum Housing

Nylon volute & impeller

Conduit fitting for mounting

Submerged use only in parts washers

Double-lip Viton shaft seal

For use with UL (PJQU) solvents

300 GPH @ 1

6 foot cord, no plug

Thermally protected

Motor —

1/40 HP

Intermittent Liquid Temp. up to — 120° F

Intake — N/A

Discharge — 1/4" MNPT

Housing — Aluminum

Cover — Aluminum

Volute — Nylon

Impeller — Nylon

Shaft Seal — Viton

Screen — Polyethylene

Oil-filled cast aluminum submersible pump for use with stoddard solvent and deodorized kerosene submerged

parts washer applications only. Sealed unit has double-lip Viton seal and nylon volute with 1/4" MNPT

discharge. 6 foot power cord without plug has "Master Builders" conduit fitting at pump housing for mounting.

For pumping unheated metal parts cleaning solvent which is UL classified as PJQU, as described in the Gas and

Oil Equipment Directory. These refined petroleum distillates are free from tendency to heat spontaneously;

they have a closed cup flash point not lower than 100 degrees F. Thermally protected.

2E-NYS Series

Construction

Specialty Pumps

PAGE 1
Little GIANT Specialty Pumps Pump Company 2E-NYS Series Features + Oil-filled Aluminum Housing + Nylon volute & impeller + Conduit fitting for mounting + Submerged use only in parts washers + Double-lip Viton® shaft seal + For use with UL (PJQU) solvents + 300 GPH @ 1 + 6 foot cord, no plug + Thermally protected Construction + Motor — 1/40 HP + Intermittent Liquid Temp.
PAGE 2
E-NYS Series Specifications Model No. Item No. Discharge Size Listings HP Volts Hertz 2E-NYS 502020 1/4" MNPT UR/C-CSA 1/40 115 60 Amps Watts 1.7 100 Shut Off Pwr. Cord Weight Feet PSI (ft) (Lbs.) Performance (GPH @ Head) 3' 9' 1' 5' 300 255 205 70 11.8 5.1 6 4.67 FLOW - LITERS/HOUR 0 250 500 750 1000 12 3.5 10 Replacement Parts 3 2.5 8 2 6 1.5 4 1 2 HEAD - METERS HEAD - FEET 1250 Volute Impeller Screen Gasket 102333 102470 102901 102601 0.