WASTEWATER PRODUCT CATALOG littlegiant.
TABLE OF CONTENTS UTILITY PUMPS Pony Pump® Series............................................................................................................ 2 UPSP-5 Series..................................................................................................................... 4 5 Series............................................................................................................................... 6 FLS/FS Series....................................................................
UTILITY PUMPS PONY PUMP® SERIES - 1/10 HP APPLICATIONS Commercial, industrial, and home uses where liquid must be transferred FEATURES Self-priming for instant delivery or dewatering up to 6 ft (1.
UTILITY PUMPS PONY PUMP® SERIES - 1/10 HP ENGINEERING DATA 115 VAC MOLDED PLUG G B E F J D Model 115 V 12 VDC A 3/4" GHT 1.91 cm 3/4" GHT 1.91 cm B 3/8" NPT 9.5 mm 3/8" NPT 9.5 mm C 6.73" 17.09 cm 5.93" 15.06 cm D 1.87" 4.75 cm 1.87" 4.75 cm E 4.68" 11.89 cm 4.18" 10.62 cm PERFORMANCE DATA LPH 30 0 K H A C F 3.90" 9.91 cm 3.13" 7.95 cm G 3.00" 7.62 cm 3.00" 7.
UTILITY PUMPS UPSP-5 SERIES - 1/2 HP APPLICATIONS Pressure boosting for washing vehicles, flooded basements, watering lawns, draining water heaters FEATURES Non-submersible, inline, portable, all cast iron utility transfer pump with integral carrying handle Self-priming to 15 ft (4.
UTILITY PUMPS UPSP-5 SERIES - 1/2 HP ENGINEERING DATA E D C B A A 8.6" (22.0 mm) B 10.0" (25.4 mm) C 5.6" (14.
UTILITY PUMPS 5 SERIES - 1/6 HP APPLICATIONS Commercial, industrial, and home uses where water must be transferred or recirculated FEATURES 1/6 hp shaded pole motor with overload protection Designed for continuous duty Pumps down to 1/8" (3.2 mm) 1" FNPT (25.
UTILITY PUMPS 5 SERIES - 1/6 HP ENGINEERING DATA A A C C B B 5-ASP 5-MSP Model A 7.78" 19.76 cm 7.78" 19.76 cm 5-MSP 5-ASP PERFORMANCE DATA 1000 C 4.13" 10.49 cm 4.13" 10.49 cm CONSTRUCTION Motor Housing Impeller Material Impeller Type Volute Motor Shaft Shaft Seal Fasteners Bearings Power Cord LPH 0 B 6.1" 15.49 cm 7.75" 19.
UTILITY PUMPS FLS/FS SERIES - 1/2 HP, 1 HP APPLICATIONS Water transfer or recirculation and general construction dewatering FEATURES 1/2 hp or 1 hp permanent split capacitor (PSC) motor with overload protection Designed for continuous duty 2" MNPT discharge 120 °F (49 °C) liquid temperature rating cCSAus listed FLS-400 FS-750 SERIES SPECIFICATIONS HP 8 Volts Amps Hz 1/2 1 115 115 60 60 FLA 5 10 Item No. Model HP Volts Watts Start 24 47.
UTILITY PUMPS FLS/FS SERIES - 1/2 HP, 1 HP ENGINEERING DATA Model A 11.93" 30.30 cm 13.94" 35.41 cm FLS-400 FL-750 B 9.3" 23.62 cm 10.79" 27.
SUMP PUMPS 5.5 SERIES - 1/4 HP APPLICATIONS Basement sumps FEATURES PSC motor with thermal overload protection Integral snap-action float switch 1-1/2" discharge 3/4" GHT (19mm) garden hose adapter included Screened inlet handles up to 3/8" (9.5 mm) solids 120 °F (49 °C) liquid temperature rating cCSAus listed SERIES SPECIFICATIONS 10 Model HP Volts Hz Amps Watts 5.5-ASPA 1/4 115 60 3.5 350 Max. Water Temp. 120F GPM / Liters per Minute @ Height 5 ft / 1.
SUMP PUMPS 5.5 SERIES - 1/4 HP ENGINEERING DATA TYPICAL INSTALLATION B C A A 10.8" (274.8 mm) B 10.4" (264 mm) C 8.
SUMP PUMPS 6 SERIES - 1/3 HP APPLICATIONS Basement sumps, dewatering, water transfer FEATURES Shaded pole motor with thermal overload protection Designed for continuous duty Oil-filled motor housing PVC riser legs (506162 only) 1-1/2" FNPT discharge (38 mm) 1-1/4" FNPT (31.
SUMP PUMPS 6 SERIES - 1/3 HP ENGINEERING DATA C B A 6-CIM-R D B A C 6-CIA Model 6-CIM-R, 6-CIA-RFS, 6-CIA-RF A 7.25" 18.42 cm 6" 15.24 cm 6-CIA B 9.5" 24.13 cm 9.5" 24.13 cm PERFORMANCE DATA 25 50 75 100 125 150 5 4 Shaft Seal 6 15 10 Fasteners 3 Bearings 2 Power Cord 1 10 CAPACITY - GPM 20 30 40 50 Hotline: 1.800.701.7894 | www.littlegiant.
SUMP PUMPS 6EC SERIES - 1/3 HP PLASTIC BASE APPLICATIONS Basement sumps, dewatering, water transfer, light effluent FEATURES CAST IRON BASE Heavy-duty cast iron construction Permanent split capacitor (PSC) motor with thermal overload protection Designed for continuous duty Energy-saving low amp draw 1-1/2" FNPT discharge (38 mm) Handles up to 1/2" (12.
SUMP PUMPS 6EC SERIES - 1/3 HP ENGINEERING DATA B C C B A A 6EC-CIM/6EC-CIA-RF (cast iron volute) A 6EC-CIM/6EC-CIA-RF (plastic volute) Model 6EC-CIA-SFS 6EC-CIA-RF 6EC-CIM Base Polypropylene Polypropylene Cast Iron Polypropylene Cast Iron A 11.28" (286.5 mm) 11.08" (281.5 mm) 10.9" (276.2 mm) 11.08" (281.5 mm) 10.9" (276.2 mm) PERFORMANCE DATA 30 LPM 0 50 6EC-CIA-SFS (plastic volute) B 10.66" (270.8 mm) 8.79" (223.4 mm) 8.79" (223.4 mm) 8.79" (223.4 mm) 8.79" (223.4 mm) C 8.48" (215.5 mm) 8.
SUMP PUMPS HT-6E SERIES (HIGH TEMPERATURE) - 1/3 HP APPLICATIONS Boiler blow-down sump pits, transformer vaults, water transfer, light effluent FEATURES Shaded pole motor with thermal overload protection Designed for continuous duty 1-1/2" FNPT discharge (38 mm) Handles up to 1/2" (12.7 mm) solids Integral mechanical float switch Up to 200 °F (93 °C) CSA listed SERIES SPECIFICATIONS Volts 115 Item No. 506600 16 Amps Hz 60 FLA 10.
SUMP PUMPS HT-6E SERIES (HIGH TEMPERATURE) - 1/3 HP ENGINEERING DATA B A C SCREEN TO PASS 1/2" SOLIDS A 10.9" 27.7 cm B 8.8" 22.
SUMP PUMPS 8 SERIES - 4/10 HP APPLICATIONS Basement sumps, dewatering, water transfer FEATURES Shaded pole motor with thermal overload protection Designed for continuous duty Oil-filled motor housing Cast iron or cast bronze pump housing 1-1/2" FNPT discharge (38 mm) 1-1/4" FNPT (31.7 mm) reducer bushing included 140 °F (60 °C) liquid temperature rating cCSAus listed 8-CBM 8-CIA SERIES SPECIFICATIONS Volts 115 Item No.
SUMP PUMPS 8 SERIES - 4/10 HP ENGINEERING DATA C B A A C 8-CIA/8-CBA 8-CIM/8-CBM Model A 6" 15.24 cm 6" 15.
SUMP PUMPS WRS SERIES - 1/6 HP, 1/3 HP, 4/10 HP DRAINOSAUR® & DRAINOSAUR JR.® APPLICATIONS Impractical drainage areas, under sinks, laundry trays FEATURES BASIN FEATURES WRS-5 3.
SUMP PUMPS WRS SERIES - 1/6 HP, 1/3 HP, 4/10 HP PERFORMANCE DATA WRS-5 WRS-6 & WRSC-6 LPM LPM 10 20 30 40 50 0 30 60 90 120 150 180 25 20 20 6 6 15 15 4 4 10 10 2 0 5 10 15 20 0 HEAD - FEET 0 METERS HEAD - FEET 2 5 5 0 0 10 20 30 40 50 0 METERS 25 0 CAPACITY - GPM CAPACITY - GPM WRS-9 45 40 35 30 25 20 15 HEAD - FEET 10 5 0 0 10 CAPACITY - GPM 20 30 40 50 60 70 Hotline: 1.800.701.7894 | www.littlegiant.
SUMP PUMPS WRS SERIES - 1/6 HP, 1/3 HP, 4/10 HP ENGINEERING DATA E F E A A B C F B C Model WRS-5 WRS-6 WRS-9 WRSC-6 D D WRS WRSC A 16.17" (41.07 cm) 16.17" (41.07 cm) 16.17" (41.07 cm) 10.55" (26.8 cm) B 15.68" (39.83 cm) 15.68" (39.83 cm) 15.68" (39.83 cm) 10.06" (25.55 cm) C 14.75" (37.47 cm) 14.75" (37.47 cm) 14.75" (37.47 cm) 8.9" (22.61 cm) D 10.63" (27 cm) 10.63" (27 cm) 10.63" (27 cm) 10.63" (27 cm) E 1-1/2" ( FNPT 3.81 cm) 1-1/2" ( FNPT 3.81 cm) 1-1/2" ( FNPT 3.
SUMP PUMPS WRS SERIES - 1/6 HP, 1/3 HP, 4/10 HP TYPICAL INSTALLATION *CHECK VALVE POWER CORD (CORD GROMMET INCLUDED) *DISCHARGE PIPE * BASIN VENT PIPE 2" MNPT REQUIRED FOR BASIN COVER, IF PRESENT *UNION 1-1/2" SLIP X 2" MNPT ADAPTER IS PROVIDED. USE IF REQUIRED. *NOT INCLUDED FILTER ACCESS COVER WITH O-RING 2" MNPT TO 1-1/2" FNPT REDUCER BUSHING PROVIDED. USE IF REQUIRED. FILTER 2" SLIP X 1-1/2" MNPT ADAPTER PROVIDED. USE IF REQUIRED. BASIN COVER BASIN DISCHARGE PIPE *UNION *INTAKE 3/16" DIA.
SUMP PUMPS CS-SS SERIES - 1/3 HP APPLICATIONS Residential crawl spaces, low-lying areas FEATURES PACKAGE FEATURES 1/3 hp cast iron pump with overload protection 18" x 22" (46 cm x 56 cm) lightweight perforated polypropylene basin Structural foam cover with slip fit flanges 1-1/4" x 24' (31.7 mm x 7.
SUMP PUMPS CS-SS SERIES - 1/3 HP ENGINEERING DATA INSTALLATION DATA B 1-1/4" (31.7 MM) SUMP PUMP DISCHARGE HOSE KIT LITTLE GIANT MODEL CS-SS LITTLE GIANT MODEL 6EC-CIA-SFS A D FLOOR JOISTS C CRAWL SPACE POWER CORD TO OUTLET SLOPE DISCHARGE AWAY FROM FOUNDATION E A 22.1" 56.13 cm B 21" 53.34 cm C 4" 10.16 cm D 1.5" 3.81 cm E 0.5" 1.
SUMP PUMPS SPK SERIES - SUMP PUMP SYSTEM APPLICATIONS The SPK series pump packages are ideally suited for basement sumps and flood control applications FEATURES Prepackaged system (assembly required) has everything you need for an installation in one SKU; SPK-8CIA-1A even comes with a tank alert alarm system for peace of mind The system includes the time tested Little Giant 6 or Little Giant 8 Series of sump pump paired with the Little Giant diaphragm switch Pumps include extension feet to keep the p
SUMP PUMPS SPK SERIES - SUMP PUMP SYSTEM ENGINEERING DATA INSTALLATION DATA CHECK VALVE DISCHARGE PIPE GASKET SUPPLIED WITH COVER SEE PIPE DETAIL SECURE COVER WITH WASHERS AND SCREWS 113360 GROMMET SUPPLIED WITH BASIN PUMP BASIN 106389 LEG KIT SUPPLIED WITH PUMP DISCHARGE PIPE COVER INSTALL ADAPTAFLEX FROM BOTTOM SIDE OF COVER PERFORMANCE DATA PUMP CONSTRUCTION Motor Housing Impeller Material Impeller Type Volute Motor Shaft LPM 0 50 100 150 200 30 9 8 25 20 15 Fasteners 5 Bearings 4
BATTERY BACKUP APS-115 - BATTERY BACKUP SYSTEMS APPLICATIONS Sump, effluent, and sewage pump power backup system FEATURES Fully automatic charging system Powers existing sump, effluent or sewage pump in the event of a power outage NOT FOR SALE IN CALIFORNIA: Operates 115 Volt pump up to 1/2 hp The battery charger contained in this product does not meet the California Efficiency Regulations codified at 20 CCR §1601-1608.
BATTERY BACKUP APS-115 - BATTERY BACKUP SYSTEMS ENGINEERING DATA TYPICAL INSTALLATION SYSTEM LIGHTS 115 VAC OUTLET SURE SUMP POWER CORD U.L. RECOGNIZED 2-12 VDC LEAD ACID TYPE BATTERIES CONNECTED IN SERIES PRODUCING 24 VDC. (NOT INCLUDED) SURE SUMP UNIT PUMP POWER CORD PLUGS INTO SURE SUMP OUTLET 10.50 16.63 7.63 17.00 SUMP PIT A 12" 30.48 cm B 23" 58.42 cm C 16-1/2" 41.91 cm D 14-5/8" 37.15 cm PERFORMANCE DATA E 8-3/8" 21.
BATTERY BACKUP SPBS SERIES - BATTERY BACKUP SYSTEMS FEATURES SPBS-10HF-6 AND SPBS-12HF-10 SERIES 12 VDC backup pump • Durable non-corrosive pump housing with stainless steel fasteners • Easily removed bottom suction screen for serviceability and maintenance • Diaphragm switch activated 115 VAC primary pump • Heavy-duty cast iron construction • Energy-efficient permanent split capacitor (PSC) motor with automatic reset thermal overload protection • 1-1/2" FNPT discharge piping size • Lift ring for easy a
BATTERY BACKUP SPBS SERIES - BATTERY BACKUP SYSTEMS FEATURES SPBS-10HF AND SPBS-12HF SERIES 12 VDC backup pump • Durable non-corrosive pump housing with stainless steel fasteners • Easily removed bottom suction screen for serviceability and maintenance Diaphragm switch Check valve, elbow connector, and pump coupling Battery box holds size 27, 12 V deep cycle battery (battery not included) * Recommended 12 VDC deep cycle battery, lead acid or AGM Model 506406 • 12 VDC backup pump - 42 gpm (159 lpm)
BATTERY BACKUP SPBS SERIES - BATTERY BACKUP SYSTEMS FEATURES CONTROLLER/CHARGER/ALARM Input: 120 VAC, 3 Amp Output (Maximum Charging Current): • Model 1210HF: 12 VDC, 10 Amps with SPBS-10HF and SPBS-10HF-6 • Model 1212HF: 12 VDC, 12 Amps with SPBS-12HF and SPBS-12HF-10 Use only with 12 VDC deep cycle battery rated 85-140Ah, lead-acid or AGM • A controller/charger monitors the battery condition and charges the battery when required.
BATTERY BACKUP SPBS SERIES - BATTERY BACKUP SYSTEMS BACKUP SYSTEM ON A COMMON DISCHARGE Common drain pipe from household plumbing (not included) Cable Tie (2) Discharge Pipe Wye Assembly (not included in 506406 and 506407 systems) Cable Tie (1) Backup Pump Control Switch Controller/Charger/Alarm Check Valve (not included in 506406 and 506407 systems) Check Valve 90° Street Elbow Air Bleed Hole Flexible Coupling Primary Pump (not included in 506406 and 506407 systems) Battery Box Backup Pump Hotlin
BATTERY BACKUP SPBS SERIES - BATTERY BACKUP SYSTEMS BACKUP SYSTEM ON A SEPARATE DISCHARGE Backup drain pipe from household plumbing (not included) Cable Tie (2) Primary drain pipe from household plumbing (not included) Cable Tie (1) Backup Pump Control Switch Check Valve Check Valve (not included in 506406 and 506407 systems) Controller/Charger/Alarm 90° Street Elbow Air Bleed Hole Primary Pump (not included in 506406 and 506407 systems) Flexible Coupling Backup Pump 34 Battery Box
BATTERY BACKUP SPBS SERIES - BATTERY BACKUP SYSTEMS TYPICAL INSTALLATION Controller/Charger/Alarm Primary Pump Cord Battery Pump Control Switch Cord 12 VDC Pump Cord Common Drain Pipe From Household to Plumbing (not included) Battery Cord Battery Box Discharge Pipe Wye Assembly Backup Pump Control Switch Primary Pump Flexible Coupling Primary Pump Check Valve Hotline: 1.800.701.7894 | www.littlegiant.
OIL SENSING SYSTEMS OS3 SERIES (OIL SENSING SUMP SYSTEM) APPLICATIONS Ideal for elevator sump pits, transformer vaults, and water-and-oil prone confined spaces in accordance with ASME - A17 FEATURES Multiple indicator lights: power, pump run, high water, high oil, pump overload, and 6 ft SJTOW cord Single-piece sensor for easy installation ASME - A17 compliant Includes remote alarm Alarm panel can be connected to Oil Sensing Sump System’s remote panel which contains audio/visual alarming Both t
OIL SENSING SYSTEMS OS3 SERIES (OIL SENSING SUMP SYSTEM) ENGINEERING DATA D A B C A 10.6" 26.92 cm B 4.4" 11.18 cm INSTALLATION DATA REMOTE ALARM HAS ADDITIONAL AUXILIARY CONTACTS FOR BUILDING ALARM SYSTEM REMOTE ALARM D 1.6" 4.06 cm CONSTRUCTION CONTROL PANEL 120 V OUTLET 120 V OUTLET IN ELEVATOR EQUIPMENT ROOM ELEVATOR SUMP PUMP START LEVEL C 4.2" 10.
EFFLUENT PUMPS 6EC SERIES - 1/3 HP PLASTIC BASE APPLICATIONS Basement sumps, dewatering, water transfer, light effluent FEATURES CAST IRON BASE Heavy-duty cast iron construction Permanent split capacitor (PSC) motor with thermal overload protection Designed for continuous duty Energy-saving low amp draw 1-1/2" FNPT discharge (38 mm) Handles up to 1/2" (12.
EFFLUENT PUMPS 6EC SERIES - 1/3 HP ENGINEERING DATA B C C B A A 6EC-CIM/6EC-CIA-RF (cast iron volute) A 6EC-CIM/6EC-CIA-RF (plastic volute) Model 6EC-CIA-SFS 6EC-CIA-RF 6EC-CIM Base Polypropylene Polypropylene Cast Iron Polypropylene Cast Iron A 11.28" (286.5 mm) 11.08" (281.5 mm) 10.9" (276.2 mm) 11.08" (281.5 mm) 10.9" (276.2 mm) PERFORMANCE DATA 30 LPM 0 50 6EC-CIA-SFS (plastic volute) B 10.66" (270.8 mm) 8.79" (223.4 mm) 8.79" (223.4 mm) 8.79" (223.4 mm) 8.79" (223.4 mm) C 8.48" (215.
EFFLUENT PUMPS 9EC SERIES - 4/10 HP APPLICATIONS Effluent wastewater removal, dewatering, water transfer FEATURES Permanent Split Capacitor (PSC) Designed for continuous duty Energy-saving low amp draw 1-1/2" FNPT (38 mm) discharge Handles solids up to 3/4" (19 mm) diameter Multiple switch options for automatic operation 140 °F (60 °C) liquid temperature rating cCSAus listed 9EC-CIM 9EC-CIA-RF 9EC-CIA-SFS SERIES SPECIFICATIONS 40 Model HP Volts HZ Amps Watts Max. Water Temp.
EFFLUENT PUMPS 9EC SERIES - 4/10 HP ENGINEERING DATA 115 VOLT PLUG B 115 VOLT PLUG C A C A B 9EC-CIA-RF 9EC-CIA-SFS 115 VOLT PLUG B A C 9EC-CIM Model 9EC-CIA-SFS 9EC-CIA-RF 9EC-CIM A 11.8" (300 mm) 11.0" (280 mm) 11.0" (280 mm) PERFORMANCE DATA C 8.4" (214 mm) 8.4" (214 mm) 8.4" (214 mm) CONSTRUCTION 45 Cover 40 Motor Housing Impeller Material Impeller Type Volute Motor Shaft 35 30 25 Mechanical Shaft Seal 20 Fasteners Bearings Power Cord 15 10 HEAD - FEET B 10.7" (271 mm) 8.
EFFLUENT PUMPS 9ECH SERIES - 4/10 HP APPLICATIONS Effluent wastewater removal, dewatering, water transfer FEATURES Permanent Split Capacitor (PSC) Designed for continuous duty Energy-saving low amp draw 1-1/2" FNPT (38 mm) discharge Handles solids up to 3/4" (19 mm) diameter Multiple switch options for automatic operation 140 °F (60 °C) liquid temperature rating cCSAus listed 9ECH-CIM 9ECH-CIA-RF SERIES SPECIFICATIONS 42 Model HP 9ECH 4/10 Volts HZ Amps 115 60 7 Watts 830 Max
EFFLUENT PUMPS 9ECH SERIES - 4/10 HP ENGINEERING DATA B B A C A C 9ECH-CIM 9ECH-CIA-RF Model 9ECH-CIA-RF 9ECH-CIM A 10.9" (276.9 mm) 10.9" (276.9 mm) PERFORMANCE DATA C 8.4" (213.4 mm) 8.4" (213.4 mm) CONSTRUCTION 50 Cover Motor Housing Impeller Material Impeller Type Volute 40 30 Mechanical Shaft Seal Fasteners Shaft Bearings Power Cord 20 HEAD - FEET B 8.9" (226.1 mm) 8.9" (226.
EFFLUENT PUMPS 10EC SERIES - 1/2 HP PLASTIC BASE APPLICATIONS Effluent wastewater removal, dewatering, water transfer FEATURES CAST IRON BASE Heavy-duty cast iron construction Permanent Split Capacitor (PSC) Designed for continuous duty Energy-saving low amp draw 1-1/2" FNPT (38 mm) discharge Handles solids up to 1/2" (12.
EFFLUENT PUMPS 10EC SERIES - 1/2 HP ENGINEERING DATA B C C B A A 10EC-CIA-RF (cast iron volute) A 10EC-CIM/10EC-CIA-RF (plastic volute) Model 10EC-CIA-SFS 10EC-CIA-RF 10EC-CIM Base Polypropylene Cast Iron Polypropylene 10EC-CIA-SFS (plastic volute) A 11.28" (286.5 mm) 10.9" (276.2 mm) 11.08" (281.5 mm) PERFORMANCE DATA 40 LPM 0 50 B 10.66" (270.8 mm) 8.79" (223.4 mm) 8.79" (223.4 mm) C 8.48" (215.5 mm) 8.48" (215.5 mm) 8.48" (215.
EFFLUENT PUMPS 10ECH SERIES - 1/2 HP APPLICATIONS Effluent wastewater removal, dewatering, water transfer FEATURES Permanent Split Capacitor (PSC) Designed for continuous duty Energy-saving low amp draw 1-1/2" FNPT (38 mm) discharge Handles solids up to 3/4" (19 mm) diameter Multiple switch options for automatic operation 140 °F (60 °C) liquid temperature rating cCSAus listed 10ECH-CIM 10ECH-CIA-RF 10ECH-CIA-SFS SERIES SPECIFICATIONS 46 Model HP 10ECH 1/2 Volts HZ Amps 115 60 9
EFFLUENT PUMPS 10ECH SERIES - 1/2 HP ENGINEERING DATA B C C A A B 10ECH-CIA-SFS 10ECH-CIA-RF B A C 10ECH-CIM Model 10ECH-CIA-SFS 10ECH-CIA-RF 10ECH-CIM A 11.31" (287.3 mm) 11.3" (287.0 mm) 11.31" (287.3 mm) PERFORMANCE DATA C 8.4" (213.4 mm) 8.4" (213.4 mm) 8.41" (213.6 mm) CONSTRUCTION 70 Cover Motor Housing Impeller Material Impeller Type Volute Mechanical Shaft Seal Fasteners Shaft Bearings Power Cord 60 50 40 30 20 HEAD - FEET B 10.7" (271.8 mm) 8.9" (226.1 mm) 8.85" (224.
EFFLUENT PUMPS HT-10EN HIGH TEMPERATURE - 1/2 HP APPLICATIONS Boiler blow-down, effluent wastewater removal, sump pits, transformer vaults FEATURES Rated for continuous duty use dewatering, water transfer, and effluent wastewater removal applications Energy-efficient PSC motor with thermal overload protection Handles liquids up to 200 °F (93 °C) Heavy duty epoxy coated cast iron housing Solids handling up to 3/4" diameter cCSAus listing SERIES SPECIFICATIONS Volts 115 Item No.
EFFLUENT PUMPS HT-10EN HIGH TEMPERATURE - 1/2 HP ENGINEERING DATA B B C C A A Model A 11.16" 28.35 cm 11.16" 28.35 cm HT-10EN-CIA-FS HT-10EN-CIM PERFORMANCE DATA 30 LPM 0 50 100 150 C 6.77" 17.20 cm 6.77" 17.
EFFLUENT PUMPS 12E SERIES - 1/2 HP APPLICATIONS For use in dewatering, water transfer, and septic wastewater removal FEATURES Heavy-duty epoxy coated cast iron housing for high strength and heat dissipation Designed for continuous duty Upper and lower ball bearings for long life Energy-efficient PSC motor with thermal overload protection Unique cloverleaf intake design allows higher flow with 3/4" (19 mm) diameter solids handling Ideal for high-head performance in vault applications while maint
EFFLUENT PUMPS 12E SERIES - 1/2 HP ENGINEERING DATA C A B Model 12E-CIM 12E-CIA-RF A 8.07" 20.50 cm B 7.75" 19.
EFFLUENT PUMPS 14EH/16EH SERIES - 1/2 HP, 1 HP APPLICATIONS Effluent wastewater removal, dewatering, water transfer FEATURES Permanent Split Capacitor (PSC) ball bearing motor High speed 3450 rpm Completely submersible, designed for continuous duty High head model 2" FNPT (51 mm) discharge Handles solids up to 3/4" (19 mm) diameter 140 °F (60 °C) liquid temperature rating cCSAus listed 16EH-CIM 14EH-CIM SERIES SPECIFICATIONS Pump Volts Amps Hz 20' Performance (GPM @ Height in Feet) 3
EFFLUENT PUMPS 14EH/16EH SERIES - 1/2 HP, 1 HP ENGINEERING DATA A 16.2" 41.15 cm B 14.1" 35.
EFFLUENT PUMPS WS EFFLUENT SERIES - 1/3 HP, 1/2 HP, 1 HP APPLICATIONS WS30M Effluent wastewater removal, dewatering, water transfer FEATURES Split-phase, oil-filled motor Designed for high torque Piggyback mechanical float option available for automatic operation 2" NPT (51 mm) discharge Handles solids up to 3/4" (19 mm) diameter 120 °F (49 °C) liquid temperature rating cCSAus listed WS50HAM WS30AM WS50HM SERIES SPECIFICATIONS Item No.
EFFLUENT PUMPS WS EFFLUENT SERIES - 1/3 HP, 1/2 HP, 1 HP ENGINEERING DATA A C B Model A 11.25" 28.58 cm 13.75" 34.93 cm 13.75" 34.93 cm 13.75" 34.
EFFLUENT PUMPS WSV50 EFFLUENT SERIES - 1/2 HP APPLICATIONS Effluent wastewater removal, dewatering, water transfer FEATURES Oil-free Permanent Split Capacitor (PSC) with double ball bearings High head model Solids handling vortex impeller Piggyback mechanical float option available for automatic operation 2" NPT (51 mm) discharge Handles solids up to 3/4" (19 mm) diameter 120 °F (49 °C) liquid temperature rating cCSAus listed WSV50HM WSV50HAM SERIES SPECIFICATIONS Volts 115 Item No.
EFFLUENT PUMPS WSV50 EFFLUENT SERIES - 1/2 HP ENGINEERING DATA B A C A 14.49" 36.8 cm B 9.67" 24.56 cm PERFORMANCE DATA CONSTRUCTION Motor Housing Impeller Material Impeller Type Volute Motor Shaft Shaft Seal Fasteners Bearings Power Cord LPM 50 0 50 100 C 6.13" 15.57 cm 150 200 250 300 350 40 16.0 12.0 30 8.0 Cast iron Cast iron Vortex Cast iron Stainless steel Carbon/ceramic Stainless steel Upper and lower ball bearings SJOW 4.0 10 0 0 10 20 30 40 50 60 70 80 90 0.
EFFLUENT PUMPS 20E SERIES - 2 HP APPLICATIONS Effluent wastewater removal, dewatering, water transfer FEATURES Permanent Split Capacitor (PSC) Completely submersible, designed for continuous duty 2" NPT (51 mm) discharge Handles solids up to 3/4" (19 mm) diameter 140 °F (60 °C) liquid temperature rating cCSAus listed SERIES SPECIFICATIONS Volts Amps Hz Watts FLA Start 60 16.4 31 Item No.
EFFLUENT PUMPS 20E SERIES - 2 HP ENGINEERING DATA A C B A 17.75" 45.09 cm B 12.93" 32.84 cm PERFORMANCE DATA CONSTRUCTION Cover Motor Housing Impeller Material Impeller Type Volute Mechanical Shaft Seal Fasteners Shaft Bearings Power Cord LPM 120 0 100 C 8.42" 21.
EFFLUENT PUMPS WE SERIES - 1/2 HP APPLICATIONS High head filter effluent, filtered effluent service, aeration, ornamental fountains, water fountains FEATURES Franklin Electric submersible motor Heavy-duty, 300 V, 10 ft (3 m) SJOW motor stripped leads Removable built-in check valve Non-corrosive thermoplastic discharge and motor brackets Proven “PPO” staging allows close tolerances and increased performance High quality top bearing for maximum durability and years of reliable service Hex rubbe
EFFLUENT PUMPS WE SERIES - 1/2 HP ENGINEERING DATA DISCHARGE SUCTION 1-1/4" FNPT Ø3.75 SUBMERSIBLE MOTOR B A 2.13" 3.40 C D Model A 7" 17.78 cm 9" 22.86 cm 6.5" 16.51 cm 2-Wire 10 gpm 2-Wire 20 gpm 2-Wire 30 gpm B 9.38" 23.83 cm 9.38" 23.83 cm 9.38" 23.83 cm PERFORMANCE DATA 20 D 21.91" 55.65 cm 23.91" 60.73 cm 21.41" 54.38 cm CONSTRUCTION Motor Housing Impeller Material Diffuser Power Cord Check Valve Fasteners Shaft Bearings Discharge LPM 0 C 12.53" 31.83 cm 14.53" 36.91 cm 12.03" 30.
EFFLUENT PUMPS C1 SERIES - 1/2 HP APPLICATIONS Gray water pumping, filtered effluent service water pumping, water reclamation projects such as pumping from rain catchment basins, aeration and other fountain or pond applications, agriculture and livestock water pumping FEATURES Supplied with a removable 5" base for secure and reliable mounting Bottom suction design Robust thermoplastic discharge head design resists breakage during installation and operation Single shell housing design provides a c
EFFLUENT PUMPS C1 SERIES - 1/2 HP ENGINEERING DATA 1-1/4" FNPT DISCHARGE 10 FT LEAD A B C Item No Model 90301005 10C1-05P4-2W115 90301010 10C1-05P4-2W230 90302005 20C1-05P4-2W115 90302010 20C1-05P4-2W230 90302015 20XC1-05P4-2W115 90302020 20XC1-05P4-2W230 90303005 30C1-05P4-2W115 90303010 30C1-05P4-2W230 A 5" 12.70 cm 5" 12.70 cm 5" 12.70 cm 5" 12.70 cm 5" 12.70 cm 5" 12.70 cm 5" 12.70 cm 5" 12.70 cm PERFORMANCE DATA B 3.9" 9.91 cm 3.9" 9.91 cm 3.9" 9.91 cm 3.9" 9.91 cm 3.9" 9.91 cm 3.
EFFLUENT PUMPS BE SERIES - 1/2 HP, 3/4 HP APPLICATIONS Dewatering, flood irrigation, livestock watering, and for pumping septic tanks to the leach field FEATURES Higher than NEMA service factor dual compartment motor Designed for continuous duty Built-in check valve Handles solids up to 1/4" (6.4 mm) diameter 1-1/4" (31.
EFFLUENT PUMPS BE SERIES - 1/2 HP, 3/4 HP ENGINEERING DATA F A B H C M N D G O P J K L Model BE-S50 BE-S75 A 1-1/4" 3.18 cm 1-1/4" 3.18 cm B 1-1/4" 3.18 cm 1-1/4" 3.18 cm C 1/2" 1.27 cm 1/2" 1.27 cm D 1/2" 1.27 cm 1/2" 1.27 cm E .43" x .93" 1.09 x 2.36 cm .43" x .93" 1.09 x 2.36 cm F 4.25" 10.8 cm 4.25" 10.8 cm G 7.25" 18.42 cm 7.25" 18.42 cm H 10" 25.4 cm 10" 25.4 cm PERFORMANCE DATA 60 50 K 6.5" 16.51 cm 6.5" 16.51 cm L 7.6" 19.3 cm 7.6" 19.3 cm M 15.3" 38.86 cm 15.3" 38.86 cm N 3.
SEWAGE PUMPS 9SC SERIES - 4/10 HP APPLICATIONS Sewage and effluent wastewater transfer, dewatering FEATURES Permanent Split Capacitor (PSC) Energy-saving low amp draw Designed for continuous duty 2" FNPT (51 mm) discharge Handles solids up to 2" (51 mm) diameter Multiple switch options for automatic operation 140 °F (60 °C) liquid temperature rating cCSAus listed 9SC-CIM 9SC-CIA-RF 9SC-CIA-SFS SERIES SPECIFICATIONS 66 Model HP Volts Hz Amps Watts Max. Water Temp.
SEWAGE PUMPS 9SC SERIES - 4/10 HP ENGINEERING DATA 115 VOLT PLUG A C C A B B 9SC-CIA-SFS 9SC-CIA-RF C A B 9SC-CIM Model 9SC-CIA-SFS 9SC-CIA-RF 9SC-CIM A 14.4" (366 mm) 13.6" (346 mm) 13.6" (346 mm) PERFORMANCE DATA C 8.6" (219 mm) 8.6" (219 mm) 8.6" (219 mm) CONSTRUCTION 25 Cover Motor Housing Impeller Material Impeller Type Volute 20 15 Mechanical Shaft Seal Fasteners Shaft Bearings Power Cord 10 HEAD - FEET B 10.7" (273 mm) 10.4" (264 mm) 10.
SEWAGE PUMPS 10SC SERIES - 1/2 HP APPLICATIONS Sewage and effluent wastewater transfer, dewatering FEATURES Permanent Split Capacitor (PSC) Energy-saving low amp draw Designed for continuous duty 2" FNPT (51 mm) and 3" FNPT (76.2 mm) discharge models Handles solids up to 2" (51 mm) diameter Multiple switch options for automatic operation 140 °F (60 °C) liquid temperature rating cCSAus listed 10SC-CIM 10SC-CIA-RF 10SC-CIA-SFS SERIES SPECIFICATIONS Model Volts Hz Amps Watts Max.
SEWAGE PUMPS 10SC SERIES - 1/2 HP ENGINEERING DATA 115 VOLT PLUG A C C A B B 10SC-CIA-SFS 10SC-CIA-RF C A B 10SC-CIM Model 10SC-CIA-SFS 10SC-CIA-RF (2" Discharge) 10SC-CIA-RF (3" Discharge) 10SC-CIM (2" Discharge) 10SC-CIM (3" Discharge) A 14.8" (377 mm) 14.0" (356 mm) 14.0" (356 mm) 14.0" (356 mm) 14.0" (356 mm) PERFORMANCE DATA B 10.7" (273 mm) 10.4" (264 mm) 11.7" (298 mm) 10.4" (264 mm) 11.72" (297.6 mm) C 8.6" (219 mm) 8.6" (219 mm) 9.5" (242 mm) 8.6" (219 mm) 9.
SEWAGE PUMPS WSV52 SERIES - 1/2 HP APPLICATIONS Ideal for handling raw sewage, commercial dewatering sump applications with up to 2" solids FEATURES Oil-free permanent split capacitor (PSC) motor with double ball bearings Designed for continuous duty 2" FNPT (51 mm) discharge Handles solids up to 2" (51 mm) diameter Power cord sealed at motor housing 140 °F (60 °C) liquid temperature rating cCSAus listed SERIES SPECIFICATIONS Volts 115 Item No.
SEWAGE PUMPS WSV52 SERIES - 1/2 HP ENGINEERING DATA A C B A 15.75" 40 cm B 8.78" 22.3 cm PERFORMANCE DATA CONSTRUCTION Motor Housing Impeller Material Impeller Type Volute Motor Shaft Shaft Seal Fasteners Bearings Power Cord LPM 30 0 40 80 120 160 200 240 320 9 25 20 6 15 10 Cast iron Cast iron Vortex Cast iron Stainless steel Carbon/ceramic Stainless steel Upper and lower ball bearings SJOW 3 5 0 0 0 10 20 30 40 50 60 70 80 METERS HEAD - FEET C 6.38" 16.
SEWAGE PUMPS 14S SERIES - 1/2 HP APPLICATIONS Sewage and effluent wastewater transfer, dewatering FEATURES Permanent Split Capacitor (PSC) Designed for continuous duty 2" FNPT (51 mm) and 3" FNPT (76.2 mm) discharge models Handles solids up to 2" (51 mm) diameter 140 °F (60 °C) liquid temperature rating cCSAus listed SERIES SPECIFICATIONS Volts 72 Amps Hz Watts FLA Start 115 60 11.6 21 1100 Item No.
SEWAGE PUMPS 14S SERIES - 1/2 HP ENGINEERING DATA A C B A 16.15" 41.02 cm B 14.07" 35.
SEWAGE PUMPS WS SERIES - 1/2 HP, 1 HP APPLICATIONS Ideal for handling raw sewage, commercial dewatering sump applications with up to 2" solids FEATURES All cast iron construction Oil-filled motor with double ball bearing capacitor start designed for high torque (single-phase only) Designed for continuous duty Switch options for automatic operation 2" (50 mm) NPT Handles solids up to 2" (51 mm) diameter Power cord sealed at motor housing 120 °F (49 °C) liquid temperature rating cCSAus list
SEWAGE PUMPS WS SERIES - 1/2 HP, 1 HP ENGINEERING DATA A C B Model A 14" 35.56 cm 15.1" 38.36 cm 15.1" 38.36 cm 15.1" 38.36 cm WS52 WS52H WS102 WS102H PERFORMANCE DATA 100 200 C 9.38" 23.83 cm 9.38" 23.83 cm 9.38" 23.83 cm 9.38" 23.83 cm CONSTRUCTION Motor Housing Impeller Material Impeller Type Volute Motor Shaft Shaft Seal Fasteners Bearings LPM 0 B 12.25" 31.12 cm 12.25" 31.12 cm 12.25" 31.12 cm 12.25" 31.
SEWAGE PUMPS 16S SERIES - 1 HP APPLICATIONS Sewage and effluent wastewater transfer, dewatering FEATURES Permanent Split Capacitor (PSC) Designed for continuous duty 3" FNPT (76.2 mm) discharge Handles solids up to 2" (51 mm) diameter 140 °F (60 °C) liquid temperature rating cCSAus listed SERIES SPECIFICATIONS Volts Amps Hz Watts Performance (GPM @ Height in Feet) 10' 20' 30' Shut-Off (ft) PSI FLA Start 21 1500 160 100 40 35 15.1 200-208 60 6.
SEWAGE PUMPS 16S SERIES - 1 HP ENGINEERING DATA A C B A 16.15" 41.02 cm B 14.07" 35.
SEWAGE PUMPS 18S SERIES - 1-1/2 HP APPLICATIONS Sewage and effluent wastewater transfer, dewatering FEATURES Permanent Split Capacitor (PSC) Designed for continuous duty Capacitor and power cord connections are isolated from oil-filled motor housing for ease of field maintenance 3" FNPT (761 mm) discharge Handles solids up to 2" (51 mm) diameter 140 °F (60 °C) liquid temperature rating cCSAus listed SERIES SPECIFICATIONS Volts 78 Amps Hz 10' Performance (GPM @ Height in Feet) 20' 30' 40
SEWAGE PUMPS 18S SERIES - 1-1/2 HP ENGINEERING DATA B A C A 18.4" 46.74 cm B 13" 33.
SEWAGE PUMPS 20S SERIES - 2 HP APPLICATIONS Sewage and effluent wastewater transfer, dewatering FEATURES Permanent Split Capacitor (PSC) Designed for continuous duty Capacitor and power cord connections are isolated from oil-filled motor housing for ease of field maintenance 3" FNPT (76.2 mm) discharge Handles solids up to 2" (51 mm) diameter 140 °F (60 °C) liquid temperature rating cCSAus listed SERIES SPECIFICATIONS Volts Amps Hz FLA Start 14.5 32.
SEWAGE PUMPS 20S SERIES - 2 HP ENGINEERING DATA B A C A 18.4" 46.74 cm B 13" 33.
PACKAGE SYSTEMS PIT+PLUS® JR - PREMIUM SIMPLEX SYSTEMS APPLICATIONS Collection of sewage, drainage or seepage water FEATURES Roto-molded polyethylene basin 24" x 24" (61 cm x 61 cm) Radial rib design for extra strength Molded inlet hub Molded anti-torque stops 360° molded handle Integrated anti-floatation collar Optional alarm versions Pre-assembled Functional and aesthetic finish cover Pump access cover Recessed discharge and vent location Independent recessed switch module Mono
PACKAGE SYSTEMS PIT+PLUS® JR - PREMIUM SIMPLEX SYSTEMS ENGINEERING DATA Finish Cover Flange Bolts *Gate Valve *Union *Union *Gate Valve Vent Discharge ø24.00 Check Valve *Check Valve 26.54 9.02 Finish Cover 4" Intake *Not *NotIncluded Included ø22.63 PERFORMANCE DATA FLOAT AND ECM™ ASSEMBLIES 55 50 45 513633 Float Assemblies Model Description No. PPJFNA Junior Float Assy, No Alarm Hardware 513634 PPJFWA Junior Float Assy, W/Alarm Hardware Item No.
PACKAGE SYSTEMS PIT+PLUS® SR - PREMIUM SIMPLEX SYSTEMS APPLICATIONS Collection of sewage, drainage or seepage water FEATURES Roto-molded polyethylene basin 20" x 30" (51 cm x 76 cm) Radial rib design for extra strength Molded inlet hub Molded anti-torque stops 360° molded handle Integrated anti-floatation collar Optional alarm versions Pre-assembled Functional and aesthetic finish cover Pump access cover Recessed discharge and vent location Independent recessed switch module Mono
PACKAGE SYSTEMS PIT+PLUS® - PREMIUM SIMPLEX SYSTEMS ENGINEERING DATA *Gate Valve Finish Cover Flange Bolts *Check Valve *Union Vent Discharge ø24.00 10.00 Finish Cover Pump On Level 32.56 4" Intake Air Bleed Hole Pump Off Level ø20.75 PERFORMANCE DATA FLOAT AND ECM™ ASSEMBLIES 55 50 45 513631 Float Assemblies Model Description No. PPSFNA Senior Float Assy, No Alarm Hardware 513632 PPSFWA Senior Float Assy, W/Alarm Hardware Item No. 513635 ECM™ Assemblies Model Description No.
PACKAGE SYSTEMS SIMPLEX AND DUPLEX SYSTEMS APPLICATIONS Collection of sewage, effluent, drainage or seepage water FEATURES Basins available in high density polyethylene structural foam [18" (46 cm), 24" (61 cm), and 30" (76 cm) dia.
PACKAGE SYSTEMS SIMPLEX AND DUPLEX SYSTEMS SERIES SPECIFICATIONS BASIN & COVER ASSEMBLIES - SIMPLEX SYSTEMS (PUMP NOT INCLUDED) [CONTINUED] Package Basin Item No. Model Item No.
PACKAGE SYSTEMS SIMPLEX AND DUPLEX SYSTEMS SERIES SPECIFICATIONS Hub kits come complete with all hardware required for installation. HUB KITS FOR 18" (46 CM) DIA. BASINS Item No. 113072 113073 113077 FIBERGLASS BASIN RISERS/EXTENSIONS Model 4" vinyl hub 4" cast iron hub 6" cast iron hub Item No. 115587 115588 115589 115590 115584 115585 115586 HUB KITS FOR 24" (61 CM) DIA. BASINS Item No.
PACKAGE SYSTEMS SIMPLEX AND DUPLEX SYSTEMS ENGINEERING DATA 36" X 36" DUPLEX COVER 9.75 9.75 4.63 TYP. VENT FLANGE CORD GROMMETS 16.00 PUMP ACCESS OPENING TYP. 18.00 40.00 1.50 20.00 5.00 TYP. 2.50 TYP. ACCESS COVERS 24" X 30" BASIN 21.75 O.D. Ø20.63 Ø18.14 30.00 O.D. 24.94 I.D. 9.00 DISCHARGE FLANGE 14.00 18" X 30" BASIN 9.00 15.42 14.50 30.13 4" or 6" CAST IRON 36.00 .20 TYP. WALL THICKNESS 4" SNAP-IN VINYL HUB .25 TYP. 16.25 I.D. STATIONARY COVER 22.50 I.D.
PACKAGE SYSTEMS WCR SERIES WATER COLLECTION & REMOVAL SYSTEMS APPLICATIONS Collection of sewage, effluent, drainage or seepage water FEATURES Pre-packaged 20" x 30" (51 cm x 76 cm) polyethylene basin with 4/10 hp sewage pump Handles up to 2" (51 mm) solids Options of structural foam or steel covers Includes schedule 40 PVC discharge piping with pre-drilled air-bleed hole Designed with side outlets for discharge and electrical cords Includes 2" (51 mm) bulkhead fitting to easily route power cord
PACKAGE SYSTEMS WCR SERIES - WATER COLLECTION & REMOVAL SYSTEMS ENGINEERING DATA TYPICAL INSTALLATION B PUMP POWER CORD AND FLOAT CORD TO EXIT HERE CHECK VALVE COMPRESSION X COMPRESSION 2" DISCHARGE BULKHEAD FITTING FOR ELECTRICAL PIPING A A 30" (76.2 cm) 4" INLET DRILL 3/16" AIR BLEED HOLE APPROX. 2" TO 3" ABOVE VOLUTE B 22" (55.88 cm) PERFORMANCE DATA 25 20 15 HEAD - FEET 10 5 0 0 20 40 60 80 100 120 CAPACITY - GPM Hotline: 1.800.701.7894 | www.littlegiant.
GRINDER PUMPS 16G SERIES - 1 HP APPLICATIONS Offered in 115V and 230V options, the 16G Series is designed as a new or replacement grinder pump for the toughest residential and light commercial wastewater applications. Ideal for use as a drop-in replacement for any effluent or sewage pump struggling with clogs and binding. 5 FEATURES 1. Heavy-duty 1 hp Class F motor provides optimal power to prevent flushables and other debris from causing clogs and downtime. 2.
GRINDER PUMPS 16G SERIES - 1 HP ENGINEERING DATA 11.33" (287.9 mm) 5.19" (131.8 mm) 2" NPT 1-1/4" NPT 3.23" (82.1 mm) 10.03" (254.7 mm) 15.78" 18.41" (400.7 mm) (467.7 mm) 17.52" (445 mm) 15.78" 18.41" (400.7 mm) (467.7 mm) 13.58" (345 mm) 10.43" 265 mm) PERFORMANCE DATA 55 LPM 0 50 CONSTRUCTION 100 150 200 16 50 45 14 40 12 35 10 30 25 8 20 6 15 Cutting Mechanism 0 5 10 CAPACITY - GPM 15 20 25 30 35 40 45 50 Hotline: 1.800.701.7894 | www.littlegiant.
ACCESSORIES ACCESSORIES PIGGYBACK DIAPHRAGM SWITCH PIGGYBACK MECHANICAL VERTICAL FLOAT SWITCH APPLICATIONS Converts manual pumps to automatic operation APPLICATIONS Converts manual pumps to automatic operation FEATURES RS-5 converts any manual pump, up through 1/2 hp (115 V) RS-5-LL (low level) converts any manual pump, up through 1/3 hp (115 V) CSA listing FEATURES Converts any manual pump, up through 1/2 hp (115 V) or 1 hp (230 V) Adjustable pumping range from 6.5" (16.5 cm) to .75" (1.
ACCESSORIES ACCESSORIES DOUBLE-FLOAT PIGGYBACK MECHANICAL FLOAT SWITCH SUMP PUMP SWITCH REPAIR KIT APPLICATIONS Pump control APPLICATIONS Switch repair kit FEATURES Controls pumps up to 1 hp (120 V) and 2 hp (230 V) Adjustable pumping range of 1.75" (4.4 cm) to 48" (122 cm) Consists of two floats, one of which contains a holding relay, enabling the floats to function in series and CSA listing FEATURES Includes pressure switch bracket assembly, screw, diaphragm, and O-ring Item No.
ACCESSORIES ACCESSORIES HWAB ALARM 303HWXT ALARM APPLICATIONS Indoor high water alarm APPLICATIONS Indoor/outdoor high water alarm FEATURES NEMA 1 thermoplastic enclosure Mechanical float switch with 15 ft (4.6 m) cable Alarm has red LED warning light, horn with silence switch, and test button 9 VDC battery backup UL and CSA listing FEATURES Type 3R watertight thermoplastic enclosure Mechanical float switch with 15 ft (4.
ACCESSORIES ACCESSORIES CONTROLS (SIMPLEX SYSTEMS) CONTROLS (DUPLEX SYSTEMS) APPLICATIONS Indoor/outdoor simplex alarm system and pump control APPLICATIONS Indoor/outdoor duplex alarm system and pump control FEATURES Includes control panel with audible alarm, silence switch, and red alarm beacon Three floats, one each for high water, pump on and off Floats have 20 ft (6 m) power cords HOA switch offers either hand, off or automatic operations Two floats - pump on/off and alarm, 513257 only
ACCESSORIES ACCESSORIES PUMP DISCONNECT GUIDE RAIL SYSTEM APPLICATIONS When discharge is no lower than 18" (46 cm) below grade or where guide rails are not necessary APPLICATIONS For installations with a total depth of over 5 ft (1.5 m) when the discharge pipe is 18" (46 cm) or more below grade, particularly when the liquid level is above the discharge level* FEATURES Non guide rail disconnect Point of discharge should be above the liquid level Item No.
ACCESSORIES ACCESSORIES CORD CONNECTORS DISCHARGE ADAPTERS APPLICATIONS Provides strain relief APPLICATIONS Allows use of garden hose with utility and sump pumps FEATURES Cord connector is liquid tight Polyamide neoprene gland resists salt water, weak acids/alkalis and other chemicals FEATURES Polypropylene, rust-resistant Item No. Model 599207 CC-1 599213 CC-3 Cord .270" to .480" 6.9 mm - 12.2 mm .545" to .709" 13.
ACCESSORIES ACCESSORIES 100 CV-112 CHECK VALVE CV-114/112 CHECK VALVE FEATURES Universal check valve for sump pumps 1-1/2" MNPT (38 mm) x 1-1/2" (38 mm) ID tubing FEATURES Sump pump check valve fits both 1-1/4" (31.7 mm) and 1-1/2" (38 mm) pipe Full-flow, slip x slip design passes 1" (25.4 mm) solids Item No. Model Material 577130 CV-112 PVC Item No.
ACCESSORIES ACCESSORIES GP GRINDER SERIES (CONTROL PANEL AND ALARM) CONTROL FLOATS APPLICATIONS Designed exclusively for the GP Manual Grinder Series APPLICATIONS For use with control panel and alarms FEATURES Properly sized start components maximize efficiency and service life of the GP grinders Color-coded terminal strip for ease of installation Circuit breaker, audible alarm, silence switch, and red flashing light are enclosed in a NEMA 4X waterproof enclosure Three floats (sold separatel
REFERENCE GUIDELINES FOR SIZING SYSTEM CAPACITY System Capacity refers to the rate of flow in gallons per minute (gpm) necessary to efficiently maintain the system. The “Fixture Unit” method is suggested for determining this figure. This approach assigns a relative value to each fixture or group of fixtures normally encountered. Determination of the required System Capacity is as follows: List all fixtures involved in the installation and using Figure 1, assign a Fixture Unit value to each.
REFERENCE GUIDELINES FOR SIZING TOTAL HEAD Total Head is a combination of two components — static head and friction head — and is expressed in feet (refer to Typical Installation illustration, Figure 3). Static Head is the actual vertical distance measured from the minimum water level in the basin to the highest point in the discharge piping. Friction Head is the additional head created in the discharge system due to resistance to flow within its components. All straight pipe, fittings, valves, etc.
REFERENCE GUIDELINES FOR SIZING PUMP SELECTION Every centrifugal pump has a unique performance curve. This curve illustrates the relationship of flow (gpm) to pressure (total head) at any point. The pump will operate at any point along this performance curve. Pump capacity is therefore the flow the pump will generate at any specific pressure. The object is to select a pump whose performance curve passes either through, or close to, the design condition, preferably above. Refer to Figure 7.
REFERENCE GUIDELINES FOR SIZING EXAMPLE SIZING PROBLEM What Pump Capacity would be required to handle the drainage from a 4 bathroom home, also including a dishwasher, a washer, a laundry tray, a kitchen sink, water softener, basement shower, a 13,000 gallon pool, and a bar sink (1-1/2" trap)? 1. From Figure 1: Description Four bathroom groups Water softener Dishwasher Washing machine Laundry tray Kitchen sink with disposal Basement shower Swimming pool Bar sink (unlisted 1-1/2") FIXTURE UNITS TOTAL 2.
REFERENCE GUIDELINES FOR SIZING SUMMARY WORKSHEET Number of Fixture Units ____________________ ____________________ Flow Rate (gpm) ____________________ ____________________ Total Head Required ____________________ ____________________ Pump Selection ____________________ ____________________ Typical Single Family Dwelling Sewage Pump Chart Note: The data contained herein is for reference only. Proper sizing and selection of sewage pumps requires consideration of many factors.
REFERENCE GUIDELINES FOR SIZING SUMMARY WORKSHEET FIGURE 7 LPM 0 118 236 354 472 590 708 826 80 24 70 60 18 20S 50 40 12 18S 30 16S 14S 6 10 0 10SC 9SC 0 20 40 60 80 100 120 140 160 180 200 220 0 METERS HEAD - FEET 20 CAPACITY - GPM Hotline: 1.800.701.7894 | www.littlegiant.
REFERENCE NOTES ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ___________________
littlegiant.
