Install Instructions
4
6EC - 10EC Series
Getting Started
This instruction sheet provides you with the information required to safely own and operate your
product. Retain these instructions for future reference.
The product you have purchased is of the highest quality workmanship and material, and has been
engineered to give you long and reliable service.
This product has been carefully tested, inspected, and packaged to ensure safe delivery
and operation.
Please examine your item(s) carefully to ensure that no damage occurred during shipment. If
damage has occurred, please contact the place of purchase.
They will assist you in replacement or repair, if required.
READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE,
OR SERVICE YOUR PRODUCT. KNOW THE PRODUCT’S APPLICATION, LIMITATIONS, AND
POTENTIAL HAZARDS. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY
INFORMATION. FAILURE TO COMPLY WITH THESE INSTRUCTIONS COULD RESULT IN
PERSONAL INJURY AND/OR PROPERTY DAMAGE!
Description
This is a submersible efuent pump for use in basins or lift stations, and is suitable for pumping
sewage, efuent, wastewater, and other non-explosive, non-corrosive liquids with up to 1/2"
spherical solids.
Safety Guidelines
1. Make certain pump is disconnected from power source before attempting to service or
remove any component.
2. Do not use to pump ammable or explosive uids such as gasoline, fuel oil, kerosene, etc.
DO NOT use in explosive atmospheres or hazardous locations as classied by NEC, ANSI/
NFPAT. Pump should be used with liquids compatible with pump component materials.
3. Do not handle the pump with wet hands or when standing on a wet or damp surface or
in water.
4. Do not pull the pump out of the water by the power cord when the pump is operating or
connected to power source.
5. This pump is supplied with a grounding conductor and/or grounding type attachment plug.
To reduce the risk of electrical shock, be certain that it is connected to a properly grounded
grounding-type receptacle.