Specification Sheet

Wastewater • Water Systems • HVAC • Industrial • Engineered Products
•
1/2 gallon collection tank
•
Vertical centrifugal pump design
•
Automatic start and stop operation
•
Some models equipped with float (solid polymer)
activated switch for automatic high level water
detection (safety overflow switch)
•
For models with safety overflow switch: dual function
NO and NC operation (set to NO from factory for
equipment shut down connection)
•
Models equipped with safety overflow switch include
two 5” switch lead wires
•
3/8” O.D. barbed discharge adapter with built-in
check valve
•
Three 1-1/8” diameter inlet openings (two fitted with
removable cap plug)
•
Thermally protected, fan cooled motor
•
Built-in wall mount tabs on tank
•
Removable pump float locking tab for safety during
transportation (remove at time of installation)
•
Maximum water temperature: 140 ºF
•
6 ft, 3-conductor cable with grounded 3-prong plug
•
Some models include 20’ x 3/8” I.D. vinyl
discharge tubing
•
Designed for automatic collection and removal of
condensate from air conditioning, refrigeration and
dehumidification equipment when gravity drainage
is not possible or practical. Also suitable for high
efficiency oil and gas-fired condensing furnace and
condensing boiler equipment
Features
•
Motor — 1/30 hp
•
Discharge — 3/8" OD barbed
•
Housing/tank cover — ABS
•
Volute — ABS
•
Tank — ABS
•
Impeller — Glass filled polypropylene
•
Check valve — Acetal
Applications
Construction
VCMA-20 Series
HVAC