Warranty

Mounting hole lines up with a locating rib on the inside of the
basin. • Le trou de montage s’aligne avec une nervure de
positionnement située à l’intérieur du réservoir. • Los agujeros de
montaje se alinean con un saliente de ubicación dentro del
depósito.
Position the pump locating plate inside the basin as shown. This
will allow proper alignment of mounting holes when installing the
basin cover. Any other position will not allow assembly of cover. •
Placer la plaque à l’intérieur du réservoir, tel qu’illustré. Ainsi, les
trous de montage seront correctement alignés au moment de la
pose du couvercle du réservoir. Tout autre positionnement de la
plaque ne permettra pas la pose du couvercle. • Coloque la
bomba poniendo la placa dentro del depósito como se ilustra.
Esto permitirá la alineación apropiada de los agujeros de montaje
cuando instale la cubierta del depósito. Cualquier otra posición no
permitirá armar la cubierta.
Figure 3
REPLACEMENT PARTS LIST
ITEM
NO.
PART
NO. DESCRIPTION QTY.
1 108101 Handle, pump 1
2 928004 Seal ring 1
3 108034 Pump base, manual, blue 1
4 909021 Screw/washer #10-24 x 1/2” 5
5 108082 Screen, intake 1
6 928028 Seal ring 1
7 108051 Housing assemby, automatic, 8’ (115v) 1
7 108052 Housing assemby, automatic, 8’ (230v) 1
8 108202 Bracket, switch 1
9 951961 Lead wire assembly 1
10 924001 O-ring, Buna-N, 2-007 2
11 950322 Switch, miniature 1
12 901529 Screw, machine #10–24 x 1/4” 1
13 902404 Screw, tap #8–18 x 3/8” 1
14 108125 Diaphragm 1
15 108055 Cover, automatic switch housing 1
16 909027 Screw/washer #10–24 x 1 3/4” 4
17 921023 Washer, #10 lock 1
18 924047 O-ring, Buna-N, 2-131 1
19 113132 Cover plate, screen 1
20 113130 Basin cover 1
21 901709 Screw, 1/4”–20 x 1/2” 14
22 924065 Seal ring 1
23 113229 Basin 1
24 113024 Discharge pipe 1
25 506160 Pump, 6-CIA-ML (115 v) 1
25 506161 Pump, 6-CIA-ML (230 v) 1
26 925016 Cord grommet 1
27 113131 Intake screen 1
28 924066 O-ring, Buna-N, 2-339 1
29 113135 Alignment plate ( See page 1) 1
LIMITED WARRANTY
Your Little Giant product is guaranteed to be in perfect condition when it leaves our Factory. It is war-
ranted against defective materials and workmanship for a period of 12 months (90 day warranty on
Models: 1-AA-OM, GKPK-SC, PP-1, PPS-1, PP-12, PPS-12, PP-230 and Cooler King) from date of
purchase by the user. No warranty on brush wear in Model 35-OM and impeller or cam in Models
PP-1, PP-12, and PP-230.
Any product that should fail for either of the above two reasons and is still within the warranty period
will be repaired or replaced at the option of Little Giant as the sole remedy of buyer. For our custom-
ers in the CONTINENTAL UNITED STATES: Please return the defective unit, postage paid, to the
factory at 301 North MacArthur Blvd., Oklahoma City, OK 73127-6616. All defective product returned
under warranty will be fully inspected to determine the cause of failure before warranty is approved.
For our customers located elsewhere; it is not economical, due to duties and freight, to return the
pump to the factory for inspection. Please return the defective unit to any authorized distributor or
dealer with a brief written explanation of the problem. If there are no apparent signs of customer
abuse, unit will be repaired or replaced. If dispute arises over replacement of the pump, the distributor
or dealer is to segregate such items and hold for inspection by a representative of Little Giant or
notify factory with details of the problem for factory disposition and settlement of warranty claim.
DISCLAIMER: THE FOREGOING WARRANTY IS AN EXCLUSIVE WARRANTY IN LIEU OF ANY
OTHER EXPRESS WARRANTIES. ANY IMPLIED WARRANTIES (INCLUDING, BUT NOT LIMITED TO
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) TO
THE EXTENT EITHER APPLIES TO A PUMP SHALL BE LIMITED IN DURATION TO THE PERIODS OF
THE EXPRESS WARRANTIES GIVEN ABOVE.
Warranty will be VOID if any of the following conditions are found:
1. Sealed motor housing opened.
2. Product connected to voltage other than indicated on nameplate.
3. Cord cut off to a length less than three feet.
4. Pump allowed to operate dry (fluid supply cut off).
5. Pump used to circulate anything other than fresh water, light oils, or other mild liquids at approxi-
mately room temperature.
6. Product abuse by customer.
7