Installation Manual

Set-up
5
5
Infl ation & Staking
6
2
6.6 ft.
(2m)
6.6 ft.
(2m)
6.6 ft. (2m)
6.6 ft. (2m)
6.6 ft. (2m)
6.6 ft.
(2m)
6.6 ft.
(2m)
6.6 ft.
(2m)
6.6 ft. (2m)
6.6 ft. (2m)
6.6 ft. (2m)
6.6 ft.
(2m)
10
8
3
CAUTION CAUTION
electrical hazard Do not touchelectrical hazard Do not touch
4
Switch power ON. If blower
does not operate when
switched on, press the reset
button on the GFCI adaptor.
1
Tie o the
short tube
as shown.
9
7
6
Shoe Storage
Attach fabric tube to blower
unit making sure the tube is
not twisted.
Re-measure clearance zone prior to ination.
Wrap drawstring around the tube
and end of blower once, and tie
tightly in place.
Secure the blower
to the ground
with the stakes
provided.
Blower should remain on and continuously inate
bouncer during use. Airow through seams is normal.
Do not try to seal or repair seams.
NOTE: Dispose of tissue paper packed inside bouncer
after ination.
TEST
RESET
WARNING:
GFCI
only
Test the blower AC Adapter:
1. Plug GFCI into receptacle.
2. Press reset button.
3. Press test button.
4. Press reset button to use product. Do not
use if the button fails to disable fan.
If the blower remains ON when the test”
button is pushed, the unit is NOT working
properly. DO NOT USE THE UNIT. Take the
unit to a certied electrician immediately.
BLOWER CAUTIONS:
Do not open or try to service the blower. If blower needs servicing, take it to a
reputable dealer.
Clearly mark the path of the power cord to avoid tripping and/or damage by
yard equipment such as lawn mowers, etc.
Do not leave blower unattended.
Do not allow blower to be used or played with by children.
Do cover the air intakes when blower is being used and do not insert small
objects into any part of the blower.
WARNING - Electrical Hazard - DO NOT USE EXTENSION CORDS WITH THIS
PRODUCT.
Disconnect the blower from the power source when moving the slide.
WARNING - To reduce the risk of re or electric shock, do not use this blower
with any solid - state speed control device.
The blower should be securely staked to the ground before use.