Installation & Assembly

10 3
Safety Warnings: ELECTRICAL BLOWER
GROUNDING METHODS
Grounding
pin
DANGER
WARNING
Electrocution Hazard- DO NOT USE
EXTENSION CORDS WITH THIS PRODUCT.
INSTRUCTIONS FOR BLOWER CLEANING AND STORAGE
Do not immerse the blower in water. Unplug the blower before cleaning. To clean: wipe with a damp cloth. The blower does not require
any lubrication and has no user serviceable parts. Do not attempt to service the blower. When not in use, store the blower indoors in a dry
place.
INSTRUCTIONS FOR BLOWER INSTALLATION
NOTE: Set up as close to power source as possible. The product
should be periodically examined for potentially unsafe conditions
such as: damaged cord, plug, housing or parts, and that in the
event such damage is found, the product should not be used until
properly repaired. Never leave the blower outside in the rain or
exposed to the elements when not in use. When in use, do not
place the cord across trac areas, water or damp areas. The blower
should be placed on a stable surface. The power cord of the blower
is equipped with a Ground Faulty Circuit Interrupter (GFCI) plug.
1) Make sure that the blower switch is in the “OFF” position. Plug
the blower into a properly grounded 110-120V GFCI outlet.
2) If the GFCI has been tripped. press the “RESET” button to restore
power to the blower.
3) Set the power switch of the blower to “ON” to inate. After use,
turn the power to “OFF”.
4) To disconnect, have an adult grip it tightly and pull the plug
from the wall outlet.
CAUTION: The blower is a high volume blower, and is capable of moving lots of air very quickly.
Place the blower in an area where it will not suck in dirt or leaves. Keep away from water and trac.
Keep children away from the blower. Only the blower supplied should be used for ination.
MODEL: BR-6
BLOWER SPECIFICATIONS:
120V (AC), 60 HZ, 0.8A, 96W
SPECIFICATIONS MAY CHANGE WITHOUT NOTICE.
CAUTION: ELECTRICALLY
OPERATED PRODUCT
DANGER - TO PREVENT ELECTRIC SHOCK, DO NOT IMMERSE
IN WATER. WIPE CLEAN WITH A DAMP CLOTH.
WARNING: FAILURE TO FOLLOW THESE INSTRUCTIONS COULD
RESULT IN SERIOUS INJURY OR DEATH. ADULT SET-UP AND
SUPERVISION REQUIRED.
• Cautionary statements which should be read before beginning
assembly.
• ADULT SET-UP AND SUPERVISION REQUIRED.
• Use only with Ground Fault Circuit Interrupt (GFCI) receptacle.
• This blower is for residential use only. It is not intended to be used in
commercial or industrial settings.
• Never insert ngers, pencils or any other object through the grill at
ANY time.
• Do not operate blower with a damaged cord or plug, after the
appliance malfunctions or has been dropped or damaged in any
manner.
• Do not operate in the presence of explosive and/or ammable
fumes.
• Never connect the blower to any solid - state speed control device.
• To reduce the risk of re or electric shock, do not use this blower
with any solid-state speed control device.
• Always unplug the blower before servicing.
• Outdoor use only.
WARNING: Failure to follow these instructions
could result in serious injury or death.
This blower is not a toy. Use under the direct supervision of a competent adult. Keep away from children.
READ AND SAVE THESE INSTRUCTIONS.
USE ONLY ON GFCI PROTECTED RECEPTACLES
GROUNDING INSTRUCTIONS FOR ALL GROUNDED, CORD-CONNECTED PRODUCTS
This product should be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock
by providing an escape wire for the electrical circuit. This product is equipped with a cord having a grounding wire with
an appropriate grounding plug. DANGER - Improper installation of the grounding plug can result in a risk of electric
shock. If repair or replacement of the cord or plug is necessary, do not connect the grounding wire to either at blade
terminal. The wire with insulation having an outer surface that is green, with or without yellow stripes, is the grounding
wire. Check with a qualied electrician or serviceman if the grounding instructions are not completely understood, or if in
doubt as to whether the product is properly grounded. Do not modify the plug provided; if it will not t the outlet, have
the proper outlet installed by a qualied electrician. For a grounded, cord-connected product, rated less than 15 amperes
and intended for use on a nominal 110-120 volt supply circuit, these instructions should be followed. This product is for
use on a nominal 110-120 volt supply circuit, and has a grounding plug that looks like the plug illustrated in sketch A.
Temporary adapters should not be used. Do not use product until a properly grounded outlet (sketch A) can be installed
by a qualied electrician.
CAUTION