User Manual
Table Of Contents
- introduction
- system overview
- safety
- installing SPICE
- maintenance
- glossary
- installation checklist
- unit specifications
FOUR: installing SPICE SPICE™ Hardware Guide
installing bSPICE 550008 Rev. A
24 Littlefeet, Inc.
figure 18. bSPICE connections
Connect the power cable from the external power supply to mains power. The colors and
meanings of the wires in the cable are given in Table 2.
!
CAUTION Dangerous voltages are present inside the external power supply. Do not remove the power
supply cover. Also note that the power supply enclosure may be extremely hot.
The power supply must be connected to the power source in accordance with local codes.
note
The power supply has double-pole/neutral fusing.
!
CAUTION The green and yellow safety ground wire from the power supply cable MUST be connected to
earth ground, or the power supply ground stud may be used to provide safety ground
connection. If the ground stud is used, it must be connected using 25 in-lbs (2.8 N-m) of
force.
An external disconnect device must be provided at time of installation in a readily accessible
location. Consult NEC (National Electrical Code) or appropriate national or local Electrical
Code for requirements. The disconnect device is not provided by Littlefeet.