User Manual

Littlefeet, Inc. 25
SPICE™ Hardware Guide FOUR: installing SPICE
550008 Rev. A installing bSPICE
The unit is active once the power is connected. Check that the LED (light) on the front of the unit
illuminates.
existing DC power source
If you are using an existing DC power source, connect the power cable from the power source to
the unit (Table 3).
The unit is active once the power is connected. Check that the LED (light) on the front of the unit
illuminates.
notify OMC
Call the OMC operator and ask the operator to dial into the unit. After a successful call, the
bSPICE is on-line. If the OMC is not available, call the unit using a laptop computer equipped
with a wireless modem as described in the SPICE Software Guide.
Make sure that the installation form is completed.
weatherproof
Weatherproof all connections that are in locations where they may be exposed to the elements, if
necessary. All connectors on the bSPICE and power supply are designed to be watertight, and
do not need further weatherproofing.
table 2. power cable wires - power supply to mains (3-
conductor)
Wire color Meaning
Blue Neutral
Brown Line
Green and Yellow Ground
table 3. power cable wires - unit to DC source (12-pin)
Wire color Meaning
Black Return
White Positive
Green Ground