User Manual
Table Of Contents
- introduction
- system overview
- safety
- installing SPICE
- maintenance
- glossary
- installation checklist
- unit specifications
Littlefeet, Inc. 47
SPICE™ Hardware Guide FIVE: maintenance
550008 Rev. A replace cSPICE coverage antennas
replace cSPICE coverage antennas
To replace the cSPICE coverage antennas, first disconnect the power to the unit.
Remove the old antennas and install the new antennas, as described on page 27. Torque the
connectors to 60 in-lbs (6.8 N-m). Make sure to slide the connector covers over the connectors
to protect the connectors.
figure 45. coverage antenna replacement
Reconnect the power to the unit.
note
The unit will be unavailable for maintenance for two to five minutes while the unit reboots.