Operating Instructions

Do you have all the tools needed?
M5 x 30 PANHEAD SCREWS x 2
1
7 mm
WALL ANCHOR x 2
2
Make sure that you have the correct type of anchors for the wall
that you’re mounting the device (i.e: concrete, drywall)
Hammer
Drill Screwdriver
PencilTape MeasureLaser Meter
TemplateTapeBubble Level
INSTRUCTIONS
CAUTION
Anchor/Gateway is not suitable for
mounting on metal surfaces. Make sure
that it is mounted on a non-metal surface
such as concrete, plastic, drywall, etc.
All instructions here are for Litum Anchor/Gateway referred to as “anchor/gateway(s)” in the
document.
CAUTION
Anchor/Gateway have unique node IDs
that are printed on the back.
It is critical that this must be mounted with
the correct node ID at each location as
instructed by Litum application engineering team.
Designed and assembled
by Litum® in Turkey
Model No. 110
Serial No. 10.100.100
Node ID. 63857
litum.com
1