Operating Instructions

INSTRUCTIONS
CAUTION
The anchor/gateway is not suitable for
mounting on metal surfaces. Make sure
that you are mounting it on a non-metal
surface such as concrete, plastic, drywall,
etc.
CAUTION
The anchor/gateway has unique node IDs
that are printed on their backside labels.
It is critical that you mount the anchor/gateway
with the correct node ID at each location as instructed by
Litum application engineering team.
Designed and assembled
by Litum® in Turkey
Model No. 110
Serial No. 10.100.100
Node ID. 63857
litum.com
Do you have all the tools needed?
M5 x 30 PANHEAD SCREWS x 4
1
7 mm
WALL ANCHOR x 4
2
Make sure that you have the correct type of anchors for the wall
that you’re mounting the device (i.e: concrete, drywall)
Hammer
Drill Screwdriver
PencilTape MeasureLaser Meter
TemplateTapeBubble Level
All instructions here are for Litum Anchor/Gateway Endurance referred to as “Anchor/
Gateway(s)” in the document.
1