Operating Instructions

WHERE TO MOUNT

The anchor/gateway is a very sensitive locating

device. For its optimal performance, it needs to be

mounted on the exact location that is instructed by

Litum application engineering team. When you find

the correct location of the anchor/gateway, we

recommend that you choose a fixed reference point

(such as a corner, window, etc.) and take another

measurement from there to double check its location.

Please make sure that you are using a correctly

scaled floor plan.

In cases where two anchors/gateways need to

be mounted closely, make sure that they are at least 2

m (6 ft) away from each other.

Devices that transmit electromagnetic signals,

such as WiFi access points, may have a negative

impact on anchor/gateway performance. If you see

such a device close to where the anchor/gateway is

to be mounted, please consult with Litum application

engineering team before you proceed.

If you need to mount anchor/gateway close to

a corner, make sure to stay away at least 50

cm (1.5 ft).

Corner

> 50 cm

(1.5 ft)

WALL

Anchor/Gateway

WHERE TO MOUNT

The anchor/gateway must be mounted on

walls, not on ceilings.

All anchors/gateways must be mounted

consistenly to the same height across the

facility.

If it is required to install the anchor/gateway

higher than 4m (13 ft), please consult Litum.

CEILING

FLOOR

h ideal = 4 m (13 ft)

h min = 2.5 m (8 ft)

WALL

Anchor/Gateway