Manualshelf

Operating Instructions

ManualsBrandsLitum ManualsComputers & AccessoriesLitum Anchor Endurance, Litum Anchor, Litum Gateway Endurance, Litum Gateway, Litum Collision Warning Forklift
12345678
4
INSTALL SCREWS
Firmly install all screws until they are pulled flush
against the plastic surface of the anchor. All screws
must be firmly installed to prevent unwanted
movement of the anchor. Ensure the device is
securely fastened to the wall.
You can connect the anchor/gateway to AC or
DC power outlet as shown below.
5
HOW TO MOUNT
1
Print the anchor/gateway drilling template. Use
it with bubble level and place it on the wall.
LOCATE & MARK
2
DRILL &
INSERT WALL PLUGS
Drill the four holes on the template
and insert wall plugs.
3
AC 110/220V
DC 5V
DC 12-24V
PLUG IN
Make sure to use correct
p
ower outlet for your device.
Failure to do so might result in
explosion.