Operating Instructions

4
www.litumiot.com | [e-mail]
OPERATION
When the device is connected to a stable power supply, service LED
should start to blink.
The service LED will light up and remain steady when the device is
communicating with a server.
RF Comm LED indicates RF communication is active.
The device has an internal backup battery. Turn the backup battery
switch on to ensure the device continues to work during power outage
or eme
rgencies. To turn off the device completely, the backup battery
switch should be turned off.
Devices with RS232 or RS485 communications can be
connected to the device through the optional Aux Comm port.
Please contact Litum for supported devices.
Digital input and relay output can be pushed through the optional
I/O port. For details please contact Litum.
In case of emergencies that can be triggered by the system, the
siren and the lights will provide alerts.
TCP LED will only be available if the device is a gateway and it will
be constantly on. Network settings for the gateways will be done
by Litum.
Battery Switch
AUX Port
PoE
I/O Port
TCP LED
Service LED
RF Comm LED
AC / DC Power