Quick Start Guide

3
Power on
Power o
Lighting Mode
Adaptive Warning Lighting
Hold the button at the back
of the helmet for 2 seconds,
then the LED taillight will blink
for 10 seconds after the helmet
is powered on, which means
the helmet automatically enters
adaptive warning light mode.
Hold the button at the back of the helmet for 2 seconds until all the LED taillight turns o.
lighting mode: After the helmet is power on, press the button for a second to switch the three lighting modes in
order. 1.adaptive warning mode A;2.adaptive warning mode B;3.keep warning light always on.
2 seconds after power on, press the button (less than 1 second), the helmet will enter the adaptive warning
lighting mode. In daytime or in a bright environment, only the central LED will keep ashing, other LED will turn
o automatically. While at night or in a dark environment, the whole taillight will keep ashing automatically.
Hold 2 seconds
Remark: When powering on, you could check the remaining battery level of the helmet by the number of tail lights,
all the 7 lights on indicates full power.